Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
1824 posts

Uber Geek
+1 received by user: 212


  Reply # 1035803 3-May-2014 00:11
Send private message

User123456:
lomenak:
User123456:
lomenak: This thread makes me happy for my choice to join Orcon (again). I cant wait to get VDSL (hopefully) connected on the 16th.
Please would you report back when you get it and what your initial feeling is toward it?? (I know that it will take 10 days to reach its optimum settings, but I am still interested nonetheless :)) 


Sure that is not a problem. I am very interested myself;)

haha understandable :D, so is the technician only coming on the 16th? or is that when you will actually start to use the VDSL?


That will be when the tech arrives and installs the VDSL master filter he'll either tell you right there and then to plug in your modem and let it boot up or he'll need to go back to the cabinet first for a few minutes and then he'll be back to plug it in and run a couple of checks 




Asus Crosshair V Formula AMD FX8320 (4.0GHz), 8GB Mushkin BlackLine DDR2400, 1x Sapphire RX580 8GB OC 1352/2000 (BIOS upgraded), 2x Kingston V300 SSD's RAID0 Boot, 1x WDC WD2003FYYS RE4 2TB, 1X WDC WD1003FZEX 1TB, 1X  SAMSUNG HD103SJ 1TB, SilverStone ST75F-P (750W) Full Modular PSU, OS WIN10 pro x64, SilverStone RaVeN RV02B-W (with USB3.0 upgrade)


6686 posts

Uber Geek
+1 received by user: 2108

Subscriber

  Reply # 1035828 3-May-2014 07:46
Send private message

when the technician visits is when you get the master filter and switched to VDSL

 
 
 
 


1091 posts

Uber Geek
+1 received by user: 199

Trusted

  Reply # 1035834 3-May-2014 08:11
One person supports this post
Send private message

User123456:(I know that it will take 10 days to reach its optimum settings, but I am still interested nonetheless :)) 


Just to clarify, in a lot of cases your line will go straight onto the optimum profile for your line and need to make no further changes during the 10 day initial training period. It isn't a case of it will be at its best on the 10th day and not before.

After the 10 day period, it still trains but samples the line and can change profile at a much slower rate. 

If your speed is going up and down during the 10 day period due to profile changes then it probably indicates a line fault that needs to be investigated.




Regards FireEngine




<==== Look no Orcon badge...



55 posts

Master Geek
+1 received by user: 1


  Reply # 1036691 5-May-2014 01:00
Send private message

Ah ok I see, thank you for the clarification, I will be honest and thought that on the 10th day it would be at its best settings.  Thank you for the pointer as well, will keep that in mind if I notice any speed differences. 

6686 posts

Uber Geek
+1 received by user: 2108

Subscriber

  Reply # 1036701 5-May-2014 06:01
Send private message

mine changed every 2 days and setteled on its final speed on the 4th day, about 3 months later i got bumped up to a 17a profile (close to the cabinet, lower than 7dB attenuation, and no profile change in the last 90 days).

you start on the 8b (0-50mbps) profile normally and if your line is good enough can jump to the 17a (0-70mbps) profile.



55 posts

Master Geek
+1 received by user: 1


  Reply # 1037443 6-May-2014 00:18
Send private message

Oh nice, yet some more useful information. Thank you for that Jase. How did you find out about the different classes? I.e. 17a/8b etc

455 posts

Ultimate Geek
+1 received by user: 69


  Reply # 1037474 6-May-2014 02:12
One person supports this post
Send private message

User123456: Oh nice, yet some more useful information. Thank you for that Jase. How did you find out about the different classes? I.e. 17a/8b etc


The Netcomm NF4V which should be supplied tells you when you go into it. You can find it displayed at the first page after you login into the modem and in device info > statistics > xDSL





You can also follow me on twitter here @kiwifortw I do twitch streams every now and then at twitch.tv/kiwiforthewin :)

HTTP 404 Sarcasm not found.

6686 posts

Uber Geek
+1 received by user: 2108

Subscriber

  Reply # 1037482 6-May-2014 05:55
Send private message

User123456: Oh nice, yet some more useful information. Thank you for that Jase. How did you find out about the different classes? I.e. 17a/8b etc


its common knowledge if you do some reading about VDSL :)

you modem displays some stats about your connection and it can be found in there



55 posts

Master Geek
+1 received by user: 1


  Reply # 1037699 6-May-2014 12:57
Send private message

Oh ok. Well I know it displapys things like the line attenuation, line db's and stream speads, but I havent seen anything relating to those clases... I assume they are found on the internet and based on thd stats from your modem?

455 posts

Ultimate Geek
+1 received by user: 69


  Reply # 1037768 6-May-2014 15:30
Send private message

User123456: Oh ok. Well I know it displapys things like the line attenuation, line db's and stream speads, but I havent seen anything relating to those clases... I assume they are found on the internet and based on thd stats from your modem?




Literally as you login to the modem it's there.





You can also follow me on twitter here @kiwifortw I do twitch streams every now and then at twitch.tv/kiwiforthewin :)

HTTP 404 Sarcasm not found.



55 posts

Master Geek
+1 received by user: 1


  Reply # 1037785 6-May-2014 15:43
Send private message

Ahh ok, well then i guess i will see this when I eventually get my VDSL. Thank you again

6686 posts

Uber Geek
+1 received by user: 2108

Subscriber

  Reply # 1037822 6-May-2014 16:38
One person supports this post
Send private message

User123456: Ahh ok, well then i guess i will see this when I eventually get my VDSL. Thank you again


you may or may not see it you need to have a reasonably low attenuation figure to get 17a ie within about 300m of the cabinet

97 posts

Master Geek


  Reply # 1037858 6-May-2014 17:36
Send private message

User123456:
lomenak:
User123456:
lomenak: This thread makes me happy for my choice to join Orcon (again). I cant wait to get VDSL (hopefully) connected on the 16th.
Please would you report back when you get it and what your initial feeling is toward it?? (I know that it will take 10 days to reach its optimum settings, but I am still interested nonetheless :)) 


Sure that is not a problem. I am very interested myself;)

haha understandable :D, so is the technician only coming on the 16th? or is that when you will actually start to use the VDSL?


the technician is only coming on the 16th, preferably that would be the day I start using the connection:)



55 posts

Master Geek
+1 received by user: 1


  Reply # 1038008 6-May-2014 23:09
Send private message

Jase2985:
User123456: Ahh ok, well then i guess i will see this when I eventually get my VDSL. Thank you again


you may or may not see it you need to have a reasonably low attenuation figure to get 17a ie within about 300m of the cabinet

I think I will definitely see it then as I am at a db of 12db and at least 900m away from the cabinet. Think I may fall into the 8b group and it may not change...

lomenak:
User123456:
lomenak:
User123456:
lomenak: This thread makes me happy for my choice to join Orcon (again). I cant wait to get VDSL (hopefully) connected on the 16th.
Please would you report back when you get it and what your initial feeling is toward it?? (I know that it will take 10 days to reach its optimum settings, but I am still interested nonetheless :)) 


Sure that is not a problem. I am very interested myself;)

haha understandable :D, so is the technician only coming on the 16th? or is that when you will actually start to use the VDSL?


the technician is only coming on the 16th, preferably that would be the day I start using the connection:)

Still quite a few days away :P. Does your plan refresh on the 23rd??



55 posts

Master Geek
+1 received by user: 1


  Reply # 1046517 16-May-2014 19:43
Send private message

@lomenak - Did the technician come today?? What is the verdict?

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

How Oppo shakes New Zealand’s phone market
Posted 22-Aug-2017 18:32


Recognition for top small business advisors
Posted 22-Aug-2017 17:23


OPPO R11 dual 20MP camera phone debuts in New Zealand
Posted 22-Aug-2017 15:45


Intel introduces new 8th Generation processors
Posted 21-Aug-2017 19:02


Trend Micro launches Home Network Security
Posted 21-Aug-2017 18:38


Avondale College students at top of Microsoft Office Specialist World Championship
Posted 21-Aug-2017 14:11


Garmin introduces inReach SE+ and inReach Explorer+
Posted 21-Aug-2017 14:05


Public Wi-Fi plus cloud file sharing
Posted 18-Aug-2017 11:20


D-Link NZ launches professional Wireless AC Wave 2 Access Point for businesses
Posted 17-Aug-2017 19:25


Garmin introduces the Rino 700 five-watt two-way handheld radio
Posted 17-Aug-2017 19:04


Garmin announces the Foretrex 601 and Foretrex 701 Ballistic Edition for outdoor and tactical use
Posted 17-Aug-2017 19:02


Brightstar announces new distribution partnership with Samsung Knox platform in Australia
Posted 17-Aug-2017 17:07


Free gig-enabled WiFi network extends across Dunedin
Posted 17-Aug-2017 17:04


Samsung expands with connect Gear S3 Frontier
Posted 17-Aug-2017 15:55


Fact-checking Southern Cross Next cable is fastest to USA
Posted 17-Aug-2017 13:57



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.