Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




36 posts

Geek
+1 received by user: 1


Topic # 143903 30-Apr-2014 22:53
Send private message

I recently had ufb installed and was wondering does the modem automatically update settings ? the modem is Netcomm NF4V the modem was sent out for Vdsl then the upgrade happened shortly after that the installer only turned it off and on and it worked (he told me they only deal with the inside optical box no further ) why i ask is because the Vdsl light still flashes like it searching connection. and being an avid gamer i was mostly disappointed to see my latency only drop from 20ms (copper) to 18-19ms fibre orcon speed test.

Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
5354 posts

Uber Geek
+1 received by user: 225

Trusted
Geekzone
Subscriber

  Reply # 1034373 30-Apr-2014 22:53
Send private message

Hello... Our robot found some keywords in your post, so here is an automated reply with some important things to note regarding broadband speeds.

 



 

If you are posting regarding DSL speeds please check that

 



 

- you have reset your modem and router

 


 

- your PC (or other PCs in your LAN) is not downloading large files when you are testing

 

- you are not being throttled by your ISP due to going over the monthly cap

 


 

- your tests are always done on an ethernet connection to the router - do not use wireless for testing

 


 

- you read this topic and follow the instructions there.

 



 

Make sure you provide information for other users to help you. If you have not already done it, please EDIT your post and add this now:

 



 

- Your ISP and plan

 


 

- Type of connection (ADSL, ADSL2, VDSL)

 


 

- Your modem DSL stats (do not worry about posting Speedtest, we need sync rate, attenuation and noise margin)

 


 

- Your general location (or street)

 


 

- If you are rural or urban

 


 

- If you know your connection is to an exchange, cabinet or conklin

 


 

- If your connection is to a ULL or wholesale service

 


 

- If you have done an isolation test as per the link above

 



 

Most of the problems with speed are likely to be related to internal wiring issues. Read this discussion to find out more about this. Your ISP is not intentionally slowing you down today (unless you are on a managed plan). Also if this is the school holidays it's likely you will notice slower than usual speed due to more users online.

 



 

A master splitter is required for VDSL2 and in most cases will improve speeds on DSL connections. Regular disconnections can be a monitored alarm or a set top box trying to connect. If there's an alarm connected to your line even if you don't have an alarm contract it may still try to connect so it's worth checking.

 



 

I recommend you read these two blog posts:

 



 

- Is your premises phone wiring impacting your broadband performance? (very technical)

 


 

- Are you receiving a substandard ULL ADSL2+ connection from your ISP?




I am the Geekzone Robot and I am here to help. I am from the Internet. I do not interact. Do not expect other replies from me.



1091 posts

Uber Geek
+1 received by user: 199

Trusted

  Reply # 1034386 30-Apr-2014 23:02
Send private message

There isn't a VDSL connection, only the WAN ethernet connection to the ONT so yes the VDSL light will flash.

Yes it works out which connection to use :-)

Your drop in ping is measured to where?




Regards FireEngine




<==== Look no Orcon badge...

 
 
 
 




36 posts

Geek
+1 received by user: 1


  Reply # 1034565 1-May-2014 09:53
Send private message

i use the orcon speed test and and windows tracert thou the tracert now always gives three stars for the coneection from modem to cabinet then pings 18-19 just like the orcon speed tes, yeah i thought the latency /ping wouldve dropped heaps from copper to fibre, so the firmware for the modem will update automatcally then?

I fix stuff!
1543 posts

Uber Geek
+1 received by user: 237

Trusted
Vocus
Subscriber

  Reply # 1034582 1-May-2014 10:04
2 people support this post
Send private message

VDSL/UFB has a very good last mile ping. There is very little difference between the 2 latency wise. The majority of the ping you are seeing is backhauling the traffic from your area to the speedtest server.



36 posts

Geek
+1 received by user: 1


  Reply # 1034667 1-May-2014 11:16
Send private message

So from adsl to vdsl then ufb my latency basically hasnt changed and give or take a couple ms so how is ufb better for gaming. So how can I test the ping from modem to cabinet when I tracert it always rejects the that section with failed or 1800ms connection

1091 posts

Uber Geek
+1 received by user: 199

Trusted

  Reply # 1034693 1-May-2014 11:48
Send private message

bigrevs27: so how is ufb better for gaming


We've commonly called out the benefits of UFB as being able to carry out a typical households requirements simultaneously, streaming, gaming etc.

I'm not aware of where we have said a faster throughput technology such as UFB makes gaming better per se. Can you point me to where we claim/advise that?




Regards FireEngine




<==== Look no Orcon badge...



36 posts

Geek
+1 received by user: 1


  Reply # 1034767 1-May-2014 12:52
Send private message

Ok ......can I test the latency from my modem to the cabinet.

455 posts

Ultimate Geek
+1 received by user: 26

Trusted

  Reply # 1034772 1-May-2014 13:04
Send private message

bigrevs27: Ok ......can I test the latency from my modem to the cabinet.


Most likely your connected via GPON and your cabinet is just a passive device. The connection between the ONT and Orcon's handover point is a layer 2 connection our PPP session most likely lives on Orcon's BNG, what you cant see is how many routers there are in path.

Anyway 20ms is dam good is dam good and if the difference between 10ms and 20ms makes a difference the latency will be cause on your PC or network, if your using wireless no doubt that will be adding some latency depending on the load of the channel at the time. Just doing a speedtest/ping test isent a good mesure to show your latency, what you really need to do is ping the IP address of the serives you wish to use, as ping the Orcon's speedtest server shows your latency to that server and that server alone different locations WILL show different latency's.





---------------------------------------------------------------
Nebukadnessar


'That VDSL Cat'
6268 posts

Uber Geek
+1 received by user: 1173

Trusted
Spark
Subscriber

  Reply # 1034778 1-May-2014 13:11
One person supports this post
Send private message

if you were already on a 1ms VDSL profile, you would have seen about a 2ms drop, if that.

VDSL is pushing that fine line of already being low latency.


your biggest benefit for gaming on fiber, is you likely have more bandwith available, so its harder to fill the pipe and start clogging things. you also no longer have a copper product controlled by DLM which arguably is the worst thing for gaming - you never know unless you meter watch when your gonna wake up and be moved back a profile to 8ms and need to wait a few weeks for it drop back down to 1ms. 


test your latency to a local server (within your city if possible.)

for me, on VDSL, i get 4~5ms to telecoms zeus server in auckland, i wouldnt expect this to drop very much more at all.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


455 posts

Ultimate Geek
+1 received by user: 26

Trusted

  Reply # 1034815 1-May-2014 13:50
One person supports this post
Send private message

hio77:
....cut.....
test your latency to a local server (within your city if possible.)
....cut.....


Well said...

just wondering if Orcon has regional BNG and not just BNG's in Auckland as if all their BNG's are in Auckland and you live outside Auckland your session will always come from Auckland.




---------------------------------------------------------------
Nebukadnessar


'That VDSL Cat'
6268 posts

Uber Geek
+1 received by user: 1173

Trusted
Spark
Subscriber

  Reply # 1034817 1-May-2014 13:57
Send private message

Nebbie:
hio77:
....cut.....
test your latency to a local server (within your city if possible.)
....cut.....


Well said...

just wondering if Orcon has regional BNG and not just BNG's in Auckland as if all their BNG's are in Auckland and you live outside Auckland your session will always come from Auckland.


if im not mistaken, isnt a regional BNG required for UFB...




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.




36 posts

Geek
+1 received by user: 1


  Reply # 1034827 1-May-2014 14:10
Send private message

Thanks for the replies . I will ping some local servers nelson tonight . I presume my 19ms is to auckland or the north island somewhere. Should I use tracert , or speedtest.org

3361 posts

Uber Geek
+1 received by user: 379

Trusted

  Reply # 1034834 1-May-2014 14:29
Send private message

Does UFB introduce altency? My experience is like 1ms on GPON in AKL to AKL server.





'That VDSL Cat'
6268 posts

Uber Geek
+1 received by user: 1173

Trusted
Spark
Subscriber

  Reply # 1034862 1-May-2014 14:49
Send private message

Zeon: Does UFB introduce altency? My experience is like 1ms on GPON in AKL to AKL server.


to my understanding, there isnt any interleavings as such added.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


6684 posts

Uber Geek
+1 received by user: 2108

Subscriber

  Reply # 1034868 1-May-2014 15:05
Send private message

i find i get lower pings using the speedtest.net website

why dont you ping your gaming server?

 1 | 2
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Avondale College students at top of Microsoft Office Specialist World Championship
Posted 21-Aug-2017 14:11


Garmin introduces inReach SE+ and inReach Explorer+
Posted 21-Aug-2017 14:05


Public Wi-Fi plus cloud file sharing
Posted 18-Aug-2017 11:20


D-Link NZ launches professional Wireless AC Wave 2 Access Point for businesses
Posted 17-Aug-2017 19:25


Garmin introduces the Rino 700 five-watt two-way handheld radio
Posted 17-Aug-2017 19:04


Garmin announces the Foretrex 601 and Foretrex 701 Ballistic Edition for outdoor and tactical use
Posted 17-Aug-2017 19:02


Brightstar announces new distribution partnership with Samsung Knox platform in Australia
Posted 17-Aug-2017 17:07


Free gig-enabled WiFi network extends across Dunedin
Posted 17-Aug-2017 17:04


Samsung expands with connect Gear S3 Frontier
Posted 17-Aug-2017 15:55


Fact-checking Southern Cross Next cable is fastest to USA
Posted 17-Aug-2017 13:57


Thurrott says Microsoft Surface is dead last for reliability
Posted 16-Aug-2017 15:19


LibreOffice 5.4 works better with Microsoft Office files
Posted 16-Aug-2017 13:32


Certus launches Cognition
Posted 14-Aug-2017 09:31


Spark adds Cambridge, Turangi to 4.5G network
Posted 10-Aug-2017 17:55


REANNZ network to receive ongoing Government funding through to 2024
Posted 10-Aug-2017 16:05



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.