Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.
View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 
35 posts

Geek
+1 received by user: 1


  Reply # 1286194 17-Apr-2015 12:10
Send private message

One of my connections with Orcon uses the NF4V but don't have this issue and have a somewhat complex LAN.
I did have issues in the beginning, so I got a Netcomm firmware, not an Orcon one and flashed it :) No dramas since but use with caution when flashing as usual advice goes.


Anyway, for those with the issue does web UI menu for ARP or syslog show anything at all on the modem/router, tried wiresharking it?
Anything at Layer2, advertisement solicitation or broadcast floods? bare in mind you use a non managed switch and make a spanning tree loop, well do I say more? But I doubt this is the case if there's a sufficient amount of people with the issue, small guess just on people saying "complex lans" they have.

Otherwise visit http://192.168.20.1/enginfo.cmd (replace the IP if required to your modems) if your handy with Linux, for some other info if you need it.
slab (proc) would have arp_cache present normally.


I prefer to ssh to my nf4v, the below will work (enable SSH in modem first) if you want data dumped via shell and not web.
"arp -a"
"syslog dump"

This may indicate if the arp table has updated. Seems it may not be flushing and updating based on various peoples 'symptoms'.

If I have the problem wrong/off course or this advice of mine has been done somewhere else in another thread - apologies.

11 posts

Geek
+1 received by user: 1


  Reply # 1291548 25-Apr-2015 22:35
Send private message

I had the same problem. Both White and black. My fix was to use a separate Wireless AP and that into a switch. The switch into the router. Now both routers are failing... looking to switch to an MicroTik RB750 for more reliability but struggling with the setup at the moment.

7742 posts

Uber Geek
+1 received by user: 2559

Subscriber

  Reply # 1297875 4-May-2015 19:24
Send private message
7742 posts

Uber Geek
+1 received by user: 2559

Subscriber

  Reply # 1303249 13-May-2015 06:13
Send private message

FYI

so it looks like we may have a resolution to this:

 

 

 

 

 

On 12/05/15, at 10:21, Ian Paul Budiman wrote:

 

 

 

 

 

Hi Jason,

Thanks for the email.

Our engineer has just updated me that after further testing and further investigation on the captured packet then they could see some inconsistency on this matter and the issue has been lodged and should be fixed on the next firmware update.

We thanking you for bringing this matter to our attention and your patience on this matter.

Please don't hesitate to contact us again if you need any further assistance.

Kind Regards,

 

 

 

 


1916 posts

Uber Geek
+1 received by user: 374

Subscriber

  Reply # 1306240 16-May-2015 11:44
Send private message

Fingers crossed for you. Keep us posted re a fix for the NP4V.

Guess my ol' Genius Bob will stay munted in this regard.

1 | 2 
View this topic in a long page with up to 500 replies per page Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.