Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




5 posts

Wannabe Geek


Topic # 188943 10-Dec-2015 16:58
Send private message

Hi All,

We just got a new UFB 100/20 installation done and the speeds are all over the place, but not as high as I'd expect.

Speed tests are coming out at between 8 Mbps and the highest has been 30-something Mbps. Not meaning to be greedy - we didn't expect it to be very close to 100 Mbps - but I would have thought it should be at least about 60/70; or is that wishful thinking?

Can anyone else let us know what speed they get on the naked 100/20 plan from Orcon?

Thanks in advance.



Filter this topic showing only the reply marked as answer Create new topic
5385 posts

Uber Geek
+1 received by user: 227

Trusted
Geekzone
Subscriber

  Reply # 1448279 10-Dec-2015 16:58
Send private message

Hello... Our robot found some keywords in your post, so here is an automated reply with some important things to note regarding broadband speeds.

 



 

If you are posting regarding DSL speeds please check that

 



 

- you have reset your modem and router

 


 

- your PC (or other PCs in your LAN) is not downloading large files when you are testing

 

- you are not being throttled by your ISP due to going over the monthly cap

 


 

- your tests are always done on an ethernet connection to the router - do not use wireless for testing

 


 

- you read this topic and follow the instructions there.

 



 

Make sure you provide information for other users to help you. If you have not already done it, please EDIT your post and add this now:

 



 

- Your ISP and plan

 


 

- Type of connection (ADSL, ADSL2, VDSL)

 


 

- Your modem DSL stats (do not worry about posting Speedtest, we need sync rate, attenuation and noise margin)

 


 

- Your general location (or street)

 


 

- If you are rural or urban

 


 

- If you know your connection is to an exchange, cabinet or conklin

 


 

- If your connection is to a ULL or wholesale service

 


 

- If you have done an isolation test as per the link above

 



 

Most of the problems with speed are likely to be related to internal wiring issues. Read this discussion to find out more about this. Your ISP is not intentionally slowing you down today (unless you are on a managed plan). Also if this is the school holidays it's likely you will notice slower than usual speed due to more users online.

 



 

A master splitter is required for VDSL2 and in most cases will improve speeds on DSL connections. Regular disconnections can be a monitored alarm or a set top box trying to connect. If there's an alarm connected to your line even if you don't have an alarm contract it may still try to connect so it's worth checking.

 



 

I recommend you read these two blog posts:

 



 

- Is your premises phone wiring impacting your broadband performance? (very technical)

 


 

- Are you receiving a substandard ULL ADSL2+ connection from your ISP?




I am the Geekzone Robot and I am here to help. I am from the Internet. I do not interact. Do not expect other replies from me.



1428 posts

Uber Geek
+1 received by user: 430

Trusted

  Reply # 1448288 10-Dec-2015 16:59
Send private message

are you testing over wifi?




 
 
 
 


4437 posts

Uber Geek
+1 received by user: 1260


  Reply # 1448289 10-Dec-2015 17:06
Send private message

axolotl: [snip]
Speed tests are coming out at between 8 MBPS and the highest has been 30-something MBPS.



Do you mean Mb/s? For a 100/20 connection, somewhere around 12MB/s would be full line speed, I doubt you would get to 30MB/s.

If that's Mb/s that you've quoted, then that's a lot lower than you would expect to a local server.

What server are you testing to, how is your device connected to the router (ethernet, WiFi etc.), and what else is using your connection at the same time?



5 posts

Wannabe Geek


  Reply # 1448292 10-Dec-2015 17:19
Send private message

Hiya,

Yes I mean Mbps. We signed up for the 100/20 plan as mentioned. 

Orcon do state (here https://www.orcon.net.nz/ufb/blog/how_fast_is_orcon_ufb) that:

"As well as this, actual UFB speeds are pretty close to the 100Mbps and 30Mbps services that you can choose when selecting an Orcon UFB plan."

I've just actually changed the server and it has improved.

I am using speedtest.net but the server was in Dunedin... have changed it to Tauranga now where we are based and am getting about 65 Mbps on average, so a big improvement. Doh, feel a bit silly now :D Yes I am testing across wifi also.





25596 posts

Uber Geek
+1 received by user: 5372

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 1448294 10-Dec-2015 17:24
4 people support this post
Send private message

 Yes I am testing across wifi also.



You've just answered your own question. Test via Ethernet and I'm sure you'll see full speed.


881 posts

Ultimate Geek
+1 received by user: 381

Trusted
Subscriber

  Reply # 1448303 10-Dec-2015 17:38
4 people support this post
Send private message

The first rule of Geekzone: Never test speed over Wi-Fi :D







5 posts

Wannabe Geek


  Reply # 1448306 10-Dec-2015 17:44
Send private message

Haha, thanks!

I don't have an Ethernet Adapter for my mac but when I get one I'll re-run the test :D

1428 posts

Uber Geek
+1 received by user: 430

Trusted

  Reply # 1448308 10-Dec-2015 17:47
Send private message

also test using a server in auckland.




1303 posts

Uber Geek
+1 received by user: 167


  Reply # 1448342 10-Dec-2015 19:13
Send private message

If you do want to keep using WiFi and want to get more speed out of it, you should look at upgrading to AC, you should be able to max out the 5Ghz band on compatible devices.







5 posts

Wannabe Geek


  Reply # 1448354 10-Dec-2015 19:50
Send private message

Thanks for that. I'm not sure Orcon offer these modems though and we're trying to keep costs down. Good to know for the future though.

10033 posts

Uber Geek
+1 received by user: 1584

Trusted

  Reply # 1448360 10-Dec-2015 19:55
Send private message

hamish225: If you do want to keep using WiFi and want to get more speed out of it, you should look at upgrading to AC, you should be able to max out the 5Ghz band on compatible devices.


Easily, but you need to be closish. My AC on my rMBP sits at 434mb, my wifi speed tests equalled the installers via ethernet, and when I was on 200/20, I got that.

192 posts

Master Geek
+1 received by user: 3


  Reply # 1448503 11-Dec-2015 08:01
Send private message

Interested in your wired Ethernet tests from an Auckland server?

In East Tamaki we were the first to have UFB fibre install along our road.

Had rock solid mid 90Mbps download speed tests.
Now quite a few houses have been hooked up and contend with us, that combined with Orcon increase in popularity, ownership change, the speeds struggle to get around 30-50 down.

Luckily we haven't noticed any real world difference and they can continue to get away with it. (Would be good to get all that was advertised and what you pay for).

25596 posts

Uber Geek
+1 received by user: 5372

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 1448515 11-Dec-2015 08:39
Send private message

scorpiworld: 
Now quite a few houses have been hooked up and contend with us, that combined with Orcon increase in popularity, ownership change, the speeds struggle to get around 30-50 down.

Luckily we haven't noticed any real world difference and they can continue to get away with it. (Would be good to get all that was advertised and what you pay for).


I'm assuming you haven't actually logged a fault with Orcon to find out what's wrong - because something is assuming your tests are via Ethernet and not WiFi.

If you're testing via WiFi there is nothing wrong.



192 posts

Master Geek
+1 received by user: 3


  Reply # 1448517 11-Dec-2015 08:48
Send private message

Yep speedtests were wired and to Auckland servers.
But with a CIR of 2.5Mbps I don't think I have a genuine fault to log. (Happy to be disagreed with)

I just thought this is what happens with shared infrastructure.

And my final excuse for apathy is Netflix, Skype, iPlayer all still run in parallel without issue.

These are speed tests after all, only when the real world applications start to be affected will my concern increase.

25596 posts

Uber Geek
+1 received by user: 5372

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 1448548 11-Dec-2015 09:13
Send private message

scorpiworld: Yep speedtests were wired and to Auckland servers.
But with a CIR of 2.5Mbps I don't think I have a genuine fault to log. (Happy to be disagreed with)

I just thought this is what happens with shared infrastructure.

And my final excuse for apathy is Netflix, Skype, iPlayer all still run in parallel without issue.

These are speed tests after all, only when the real world applications start to be affected will my concern increase.


The CIR does not work how you think it does. You have *no* CIR on the EIR component of your UFB connection (and neither does any other ISP). The CIR only applies to tagged traffic with the correct 802.1p tag. The "headline" 100Mbps/20Mbps speed is only an EIR.




Filter this topic showing only the reply marked as answer Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Phone prices rising as users move upmarket
Posted 24-Nov-2017 17:16


Talking net neutrality on RNZ Nine-to-Noon
Posted 24-Nov-2017 12:11


Air New Zealand experiments with blockchain technology
Posted 23-Nov-2017 15:39


Symantec selects Amazon Web Services to deliver cloud security
Posted 23-Nov-2017 10:40


New Zealand Ministry of Education chooses Unisys for cloud-based education resourcing management system
Posted 22-Nov-2017 22:00


Business analytics software powers profits for NZ wine producers
Posted 22-Nov-2017 21:52


Pyrios strikes up alliance with Microsoft integrator UC Logiq
Posted 22-Nov-2017 21:51


The New Zealand IT services ecosystem - it's all digital down here
Posted 22-Nov-2017 21:49


Volvo to supply tens of thousands of autonomous drive compatible cars to Uber
Posted 22-Nov-2017 21:46


From small to medium and beyond: Navigating the ERP battlefield
Posted 21-Nov-2017 21:12


Business owners: ERP software selection starts (and finishes) with you
Posted 21-Nov-2017 21:11


Why I'm not an early adopter
Posted 21-Nov-2017 10:39


Netatmo launches smart home products in New Zealand
Posted 20-Nov-2017 20:06


Huawei Mate 10: Punchy, long battery life, artificial intelligence
Posted 20-Nov-2017 16:30


Propel launch Disney Star Wars Laser Battle Drones
Posted 19-Nov-2017 21:26



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.