Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




4 posts

Wannabe Geek


Topic # 189522 3-Jan-2016 02:43
Send private message

I have a Linksys EA8500 MAX-STREAM™ AC2600 MU-MIMO SMART WI-FI ROUTER, and was wondering if it can be configured to connect to Orcon Fibre. I am looking for a boosted WiFi signal in the house due to it being split level. I have been getting speeds as low as 200kbps and lower regularly so hoping this might fix the problem. I am on the 100/20 plan and haven't been able to get over 50mbps ever. Any help would be appreciated.
cheers in advance

 

 

Create new topic
25686 posts

Uber Geek
+1 received by user: 5441

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 1460453 3-Jan-2016 03:23
Send private message

What type of connection do you have?

As to whether a new router will improve WiFi coverage is a complete unknown so it's not possible for anybody to answert that question with anything other than "maybe".

50Mbps is a great speed for 2.4GHz WiFi and you should not expect to get anything faster, regardless of the type of router you have. To get faster speeds you will need to use 5GHz and have hardware that supports this. 5GHz signals propogate less than 2.4GHz so coverage will be less than 2.4GHz.

Expecting a single router to cover a lounge house these days with so much noise in the 2.4GHz band is an unrealistic expectation. The best solution is an additional access point that you can connect ether via Ethernet cable or by purchasing a set of Ethernet over Power adapter.





4 posts

Wannabe Geek


  Reply # 1460455 3-Jan-2016 03:32
Send private message

OK so there is no point in upgrading to 200/20 plan? I won't be able to get any more speed?
I was assuming the distance from the router was the reason for the slow speeds. The speed fluctuates so much I figured there was something wrong with my Genius.
Guess it will be a trip back to the shop for a store credit...

thanks for the help

 
 
 
 


20445 posts

Uber Geek
+1 received by user: 3905

Trusted
Subscriber

  Reply # 1460456 3-Jan-2016 03:50
Send private message

How are your speeds when you are wired to the router?

Even with 802.11ac, you will not get great speeds when going thru a house. If you need good speeds over the whole house, you have to spread out accesspoints thru it in all the areas you need, best wired back to the router, second best give powerline gear a shot but I have never seen great performance out of it.




Richard rich.ms

1307 posts

Uber Geek
+1 received by user: 169


  Reply # 1460458 3-Jan-2016 04:06
Send private message

the way to go about it is to have multiple AC access points connected via ethernet or ethernet over power.

I find that 5Ghz does okay in the rooms surrounding the access point and then dies from there on out, so thats something to think about, it'll also depend on what your walls are made of.

How many users do you have? if you have more than 4 and want to keep them happy then i'd suggest multiple AC access points.

the speed fluctuations on 2.4Ghz are due to the band being so crowded, the only things i have on that now are old devices and a couple of printers.

But to answer your other question, you just need to put whatever Access point/router you buy into bridge mode, you need to keep the genius plugged in but you can turn the wifi off on it so its not causing any more interference.





105 posts

Master Geek
+1 received by user: 6


  Reply # 1460463 3-Jan-2016 06:59
Send private message

Rather than connecting it to Orcon, just add it into your network so you have two access points, genius and your linksys. Or turn the wifi off on your genius.
You may find an upgrade to the White NetComm router may make a difference and this will happen if you upgrade your plan as that is what Orcon are doing if you switch to a new plan.



4 posts

Wannabe Geek


  Reply # 1460548 3-Jan-2016 11:30
Send private message

Well taking what everyone stated into consideration I ended up cascading the router from the genius....amazing improvement




4 posts

Wannabe Geek


  Reply # 1460633 3-Jan-2016 15:51
Send private message

just keeps getting better



4 posts

Wannabe Geek


  Reply # 1478581 25-Jan-2016 20:43
Send private message

Hi There,

Had a similar problem the Orcon router is very poor. You need 5ghz to get full potential, I have connected a D-Link viper to the netcomm and get almost 100 mbp throughout the house, the improvement is incredible. I am looking for a way to not have to connect the router to the Orcon netcomm.

Cheers Utso

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39


UAV Traffic Management Trial launching today in New Zealand
Posted 12-Dec-2017 16:06


UFB connections pass 460,000
Posted 11-Dec-2017 11:26


The Warehouse Group to adopt IBM Cloud to support digital transformation
Posted 11-Dec-2017 11:22


Dimension Data peeks into digital business 2018
Posted 11-Dec-2017 10:55


2018 Cyber Security Predictions
Posted 7-Dec-2017 14:55


Global Govtech Accelerator to drive public sector innovation in Wellington
Posted 7-Dec-2017 11:21


Stuff Pix media strategy a new direction
Posted 7-Dec-2017 09:37


Digital transformation is dead
Posted 7-Dec-2017 09:31


Fake news and cyber security
Posted 7-Dec-2017 09:27


Dimension Data New Zealand strengthens cybersecurity practice
Posted 5-Dec-2017 20:27


Epson NZ launches new Expression Premium Photo range
Posted 5-Dec-2017 20:26


Eventbrite and Twickets launch integration partnership in Australia and New Zealand
Posted 5-Dec-2017 20:23


New Fujifilm macro lens lands in New Zealand
Posted 5-Dec-2017 20:16



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.