Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




5 posts

Wannabe Geek


Topic # 112609 14-Dec-2012 09:36
Send private message

Hi All,

I have a Sony Bravia TV with Freeview built in but it is not picking up freeview.

The thing is I have a set top box that does recieve freeview which is hooked up to my Bravia

Any ideas on how i can get rid of the set top box and get freeview direct to my Bravia???



View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
5921 posts

Uber Geek
+1 received by user: 870

Trusted
Subscriber

  Reply # 732403 14-Dec-2012 09:42
Send private message

Is your box hooked up to an aerial or a dish?

xpd

8360 posts

Uber Geek
+1 received by user: 1102

Mod Emeritus
Trusted
Subscriber

  Reply # 732404 14-Dec-2012 09:42
Send private message

The TV will have a built in DVB-T unit which reqs an antenna and your property being able to get a signal, whereas your set top box might be DVB-S running via an old Sky dish which will work pretty much anywhere.

Punch in your address here and check what you should be able to get.





XPD / Gavin / DemiseNZ

 

Maybe if we start telling people the brain is an app they will start using it.

 

This signature proudly stripped of anything interesting by a lack of imagination.


 
 
 
 




5 posts

Wannabe Geek


  Reply # 732407 14-Dec-2012 09:48
Send private message

Its connected to a UHF Aerial & yes I punched my address in the free view website & it has coverage 

When i plug in my old CRT TV it receives channels 1,2,3,4 & Prime + Maori the usual without the decoder.

So confused I know my TV receives Free view because I had it around the corner at my old house a week ago

96 posts

Master Geek
+1 received by user: 5


  Reply # 732411 14-Dec-2012 10:00
Send private message

Plug aerial direct into tv.
Use top left button on Bravia remote and select TV instead of HDMI.
Then it should automatically search and set for stations.



5 posts

Wannabe Geek


  Reply # 732413 14-Dec-2012 10:04
Send private message

Yes done all that its not picking up any stations except Chinese/japanese ones.

would it just be a case of moving my aerial to pick up a full signal?

2708 posts

Uber Geek
+1 received by user: 554


  Reply # 732420 14-Dec-2012 10:22
Send private message

nzmoves: Yes done all that its not picking up any stations except Chinese/japanese ones.

would it just be a case of moving my aerial to pick up a full signal?


If you are getting the Asian channels (Which I am presuming are VTV) it means you are pointing at the Sky Tower, 

All that should be required is a retune to pick up the Freeview channels




5 posts

Wannabe Geek


  Reply # 732425 14-Dec-2012 10:29
Send private message

Do you mean retune the TV or Aerial?

2708 posts

Uber Geek
+1 received by user: 554


  Reply # 732428 14-Dec-2012 10:32
Send private message

nzmoves: Do you mean retune the TV or Aerial?


The TV,

 also what is the signal strength on the channels you can get ?, it will be an option in the tuning menu somewhere....



5 posts

Wannabe Geek


  Reply # 732430 14-Dec-2012 10:35
Send private message

Signal Strength is great but still not picking up other channels

Banana?
4075 posts

Uber Geek
+1 received by user: 869

Subscriber

  Reply # 732432 14-Dec-2012 10:39
Send private message

Can you reset the TV back to default and re-run the inital setup?

When you are cycling through the inputs does it have ATV and DTV? Is there anything on either?

2708 posts

Uber Geek
+1 received by user: 554


  Reply # 732453 14-Dec-2012 10:53
Send private message

trig42: Can you reset the TV back to default and re-run the inital setup?

When you are cycling through the inputs does it have ATV and DTV? Is there anything on either?


They should be able to go >General settings > factory settings to get back to an out of the box state......

1875 posts

Uber Geek
+1 received by user: 113


  Reply # 732513 14-Dec-2012 11:50
Send private message

nzmoves: Yes done all that its not picking up any stations except Chinese/japanese ones.

would it just be a case of moving my aerial to pick up a full signal?

No.
If your STB is picking up all Freeview channels OK then unplug the aerial from the STB and plug it into the TV.
Then do an autotune.
If they work OK on the STB there's no reason why the TV wont receive them.

536 posts

Ultimate Geek
+1 received by user: 87


  Reply # 732570 14-Dec-2012 13:45
Send private message

I am in Titirangi too, and have 3 TV's in the house.

1 x Panasonic which has aerial directly into it; works fine
1 x Samsung which has STB, because TV's internal Freeview decoder would not pickup the signal, but the STB works fine
1 x Samsung which has aerial plugged directly into it; works fine.

Hows that for bizarre. So who knows if you have a similar situation to me, but the Samsung that has the STB used to work fine where we were (also in Titirangi) without the STB, but when moving to where we are now the signal just doesn't sit well with the screen, so the STB had to be used.

1146 posts

Uber Geek
+1 received by user: 125

Trusted

  Reply # 732590 14-Dec-2012 14:38
Send private message

Yay, Titirangi geekzoners unite.
I don't have anything helpful to contribute to the discussion, other than I do receive UHF Freeview. Newish UHF antenna and an older VHF antenna, which the antenna guy linked together, I think. And have a powered signal amplifier too.

Cheers,
Joseph

337 posts

Ultimate Geek
+1 received by user: 13


  Reply # 732688 14-Dec-2012 17:58
Send private message

The obvious suggestion is your reception is weak and the STB is better with a poor reception then your TV. (It's not true if one device can reliably pick up a signal all other devices supporting the same standard and using the same aerial can as well, some devices can cope with weaker signals better than others. This is true for DVB-T but also DVB-S and really any other wireless transmission standard.) Also remember the Sky Tower transmission is infill only, the signal I believe is quite a lot weaker then Waiatarua so even if you have decent LOS, you may still have problems. The testing of Asian channels off Sky Tower is I believe at a higher power so the fact these work with good signal strength but normal Freeview doesn't may not be a surprise. (Edit: Forgot to mention, remember as well that depending n your antenna, certain frequencies will pick up better then others.) What's the signal strength on proper Freeview channels on the STB? And is it possible to check the transmission channel or frequency number to work out precisely what the STB is picking up?

Also I've never used an official Freeview device but if you have the option, it may be worth asking it to do a complete scan if possible rather then only scanning for channels in Auckland, it's possible it's not scanning the infill channels/frequencies properly or something. (Not sure what frequency the Asian channel testing is on but it's possible the Freeview device doesn't consider it an infill.) 


IMO the other obvious question is whether Waiatarua would have better receiption then Sky Tower. In Titirangi it may be you don't have good LOS but with a strong signal and considering your proximity it may still be worth trying it instead of Sky Tower if you can get someone to adjust the aerial. Have you actually checked where the aerial is pointing (and also made sure the polarisation is right for wherever it is pointing)? 

P.S. There's a chance a signal amplifier may help but often it won't. Remember it's amplifying everything include noise. The most obvious time to use a signal amplifier is when you're splitting the signal and you find it works fine without splitting but you have problems when you split. Or when you have a very long cable run and it works fine near the beginning of the cable but not the end. In such a case, amplifying before splitting or before the long cable run may help.

 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

UFB connections pass 460,000
Posted 11-Dec-2017 11:26


The Warehouse Group to adopt IBM Cloud to support digital transformation
Posted 11-Dec-2017 11:22


Dimension Data peeks into digital business 2018
Posted 11-Dec-2017 10:55


2018 Cyber Security Predictions
Posted 7-Dec-2017 14:55


Global Govtech Accelerator to drive public sector innovation in Wellington
Posted 7-Dec-2017 11:21


Stuff Pix media strategy a new direction
Posted 7-Dec-2017 09:37


Digital transformation is dead
Posted 7-Dec-2017 09:31


Fake news and cyber security
Posted 7-Dec-2017 09:27


Dimension Data New Zealand strengthens cybersecurity practice
Posted 5-Dec-2017 20:27


Epson NZ launches new Expression Premium Photo range
Posted 5-Dec-2017 20:26


Eventbrite and Twickets launch integration partnership in Australia and New Zealand
Posted 5-Dec-2017 20:23


New Fujifilm macro lens lands in New Zealand
Posted 5-Dec-2017 20:16


Cyber security not being taken seriously enough
Posted 5-Dec-2017 20:13


Sony commences Android 8.0 Oreo rollout in New Zealand
Posted 5-Dec-2017 20:08


Revera partners with Nyriad to deliver blockchain pilot to NZ Government
Posted 5-Dec-2017 20:01



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.