Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 
1081 posts

Uber Geek


  #783772 19-Mar-2013 09:32
Send private message

Gooseybhai:
hdinsider: I see on the Freeview website's channel list PDF that CTV is listed as being available on both UHF and Satellite... Must be a mistake surely!


It is on UHF analouge ! 

:-)




And UHF digital too. Is it on satellite though?

246 posts

Master Geek


  #783961 19-Mar-2013 15:34
Send private message

Skolink:
Gooseybhai:
hdinsider: I see on the Freeview website's channel list PDF that CTV is listed as being available on both UHF and Satellite... Must be a mistake surely!


It is on UHF analouge ! 

:-)




And UHF digital too. Is it on satellite though?


No only on DVB-T UHF system





 
 
 
 


2502 posts

Uber Geek

Lifetime subscriber

  #783977 19-Mar-2013 16:12
Send private message

qwertee: My Panasonic DVD recorder DMR-EH57 picked up CTV without any intervention.
Both sound and video displays OK when I checked at around 9 pm.


Would your EH57 have an analog PAL tuner by any chance??




Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+. UAP, UAP AC Pro, UAP AC Pro Mesh, Apple TV 4, Apple TV 4K, iPad Air 1, iPhone 6s, VodaTV Gen 2. If it doesn't move then it's data cabled.


1 post

Wannabe Geek


  #784046 19-Mar-2013 18:58
Send private message

I sent a email to Kordia today about CTV

Dear Murray,

Thank you for your enquiry One of our team members will contact you shortly. Below is a summary of your enquiry:


Summary of web form submission:Your Name
Murray HelyEmail Address
murrayhely@yahoo.co.nzCase Number
4184170 Comments
Today in Christchurch was a special day CTV our local channel went digital on CH40 at 10.01am A mixed result, CH40 ,My small Panasonic TH- L32S25Z Audio, no Video. My other Panasonic L42U30Z Audio no video. I have tried retuning the digital tuner on both and no luck ! My Panasonic DVD Recorder DWD-XW390 , hey bingo the picture is brilliant CH40 was there with no tuning. What a difference, before the picture was snowy and shimmered a lot, now crystal clear. I rang Havey Norman and every Panasonic TV in there shop has the same problem No Video on CH40 So has anyone got a solution to the above problem ? Thanks M.O.Hely

283 posts

Ultimate Geek


  #784053 19-Mar-2013 19:21
Send private message

Working for me, but what is annoying is the junk channels that they are transmit channel information for.  I am in Christchurch and I have to delete tvCentral, TV33, Info-Rotorua, CUE, Dunedin TV etc.  Not sure what the point in transmitting the existence of channels that are not in my area.  

551 posts

Ultimate Geek


  #784062 19-Mar-2013 19:45

mikerussellnz: Working for me, but what is annoying is the junk channels that they are transmit channel information for.  I am in Christchurch and I have to delete tvCentral, TV33, Info-Rotorua, CUE, Dunedin TV etc.  Not sure what the point in transmitting the existence of channels that are not in my area.  


I would hazard a guess that you don't have a freeview approved receiver as they would hide these channels... So I guess your complaint is kind of your fault here?




don't mess with me.... i'm the hd insider....

4 posts

Wannabe Geek


  #787022 26-Mar-2013 09:07
Send private message

Hi All,

Those who where having problems receiving CTV please give it another go. Please let me know if you have any problems.

Thanks,
Stephen

 
 
 
 


3804 posts

Uber Geek


  #787027 26-Mar-2013 09:19
Send private message

CTV is now working perfectly over UHF on my Panasonic TV.

20 posts

Geek


  #787030 26-Mar-2013 09:20
Send private message

ZorkTheHippie: Hi All,

Those who where having problems receiving CTV please give it another go. Please let me know if you have any problems.

Thanks,
Stephen


As of about 1705 yesterday I could receive both vision and sound on my Panasonic.

The TV guide on my Magic TV 3600td personal video recorder is still having trouble with booking series, and as of this morning I couldn't get any listings past Friday night.

I have retuned the unit but this hasn't helped.

Any thoughts as to why this might be happening would be greatly appreciated.  Perhaps the solution is Patience.

246 posts

Master Geek


  #787045 26-Mar-2013 09:51
Send private message

ZorkTheHippie: Hi All,

Those who where having problems receiving CTV please give it another go. Please let me know if you have any problems.

Thanks,
Stephen


Stephen, thank you for that just to give everyone a heads-up there still seems to be problems with the Kordia mux (there is another thread about this) http://www.geekzone.co.nz/forums.asp?forumid=83&topicid=115247
the problem has not been fixed as yet and has been on-going for the past 3-4 weeks


---------------------------------------------------------------------------------------------------------------------------
 Ok here is my problem, I have a FreeView box installed in my car and all has been working fine up until a couple of weeks ago, when you do a auto scan it finds the TVNZ and Mediaworks mux on CH32 and 34 but when the tuner hits the Kordia Mux (CH36) it stops (as it should do) looks for the channels then carries on but has not detected the channels on that Mux. Now if I do this on manual tune the Mux is a solid 100% (CH36 594.000Mhz) it looks for the channels but comes up with nothing??
The problem is only with the Kordia mux. The tuner was working fine on the Kordia mux unit I went to retune for CTV. Have tried two other tuners and they are doing the same thing.
---------------------------------------------------------------------------------------------------------------------------





246 posts

Master Geek


  #787054 26-Mar-2013 10:25
Send private message

wilt64:
ZorkTheHippie: Hi All,

Those who where having problems receiving CTV please give it another go. Please let me know if you have any problems.

Thanks,
Stephen


Stephen, thank you for that just to give everyone a heads-up there still seems to be problems with the Kordia mux (there is another thread about this) http://www.geekzone.co.nz/forums.asp?forumid=83&topicid=115247
the problem has not been fixed as yet and has been on-going for the past 3-4 weeks


---------------------------------------------------------------------------------------------------------------------------
 Ok here is my problem, I have a FreeView box installed in my car and all has been working fine up until a couple of weeks ago, when you do a auto scan it finds the TVNZ and Mediaworks mux on CH32 and 34 but when the tuner hits the Kordia Mux (CH36) it stops (as it should do) looks for the channels then carries on but has not detected the channels on that Mux. Now if I do this on manual tune the Mux is a solid 100% (CH36 594.000Mhz) it looks for the channels but comes up with nothing??
The problem is only with the Kordia mux. The tuner was working fine on the Kordia mux unit I went to retune for CTV. Have tried two other tuners and they are doing the same thing.
---------------------------------------------------------------------------------------------------------------------------


Interesting, just rang the guys at TCC even thought
I reported the above fault well over a week ago with FreeView TCC had no record
of it, they where very thankful I rang and are going to escalate the fault and
get someone onto it straight away......





394 posts

Ultimate Geek

Lifetime subscriber

  #787055 26-Mar-2013 10:32
Send private message

Spyware:
qwertee: My Panasonic DVD recorder DMR-EH57 picked up CTV without any intervention.
Both sound and video displays OK when I checked at around 9 pm.


Would your EH57 have an analog PAL tuner by any chance??


Oops  !
I have quoted the model no for my old analogue receiver

I was referring to my Panasonic DMRXW380  twin tuners and freeview approved.

thanks

1 | 2 
View this topic in a long page with up to 500 replies per page Create new topic





Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Chorus completes the build and commissioning of two new core Ethernet switches
Posted 8-Jul-2020 09:48


National Institute for Health Innovation develops treatment app for gambling
Posted 6-Jul-2020 16:25


Nokia 2.3 to be available in New Zealand
Posted 6-Jul-2020 12:30


Menulog change colours as parent company merges with Dutch food delivery service
Posted 2-Jul-2020 07:53


Techweek2020 goes digital to make it easier for Kiwis to connect and learn
Posted 2-Jul-2020 07:48


Catalyst Cloud launches new Solutions Hub to support their kiwi Partners and Customers
Posted 2-Jul-2020 07:44


Microsoft to help New Zealand job seekers acquire new digital skills needed for the COVID-19 economy
Posted 2-Jul-2020 07:41


Hewlett Packard Enterprise introduces new HPE GreenLake cloud services
Posted 24-Jun-2020 08:07


New cloud data protection services from Hewlett Packard Enterprise
Posted 24-Jun-2020 07:58


Hewlett Packard Enterprise unveils HPE Ezmeral, new software portfolio and brand
Posted 24-Jun-2020 07:10


Apple reveals new developer technologies to foster the next generation of apps
Posted 23-Jun-2020 15:30


Poly introduces solutions for Microsoft Teams Rooms
Posted 23-Jun-2020 15:14


Lenovo launches new ThinkPad P Series mobile workstations
Posted 23-Jun-2020 09:17


Lenovo brings Linux certification to ThinkPad and ThinkStation Workstation portfolio
Posted 23-Jun-2020 08:56


Apple introduces new features for iPhone iOS14 and iPadOS 14
Posted 23-Jun-2020 08:28



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.