Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


13 posts

Geek


Topic # 160068 22-Dec-2014 14:18
Send private message

Hi guys

We have just moved into a new property which I understand does not have a UHF antenna installed. It does have a Sky dish however. We are not heavy TV watchers so will be planning on getting Sky or any other paid viewing services.

The lounge currently has a Sky cable connector which also has a couple of unterminated cables behind the faceplate - see attached. Every other rooms in the house has got a faceplate installed - see attached - which looks like freeview plugs?

Just from looking at the photo of the unterminated cable, I'm just wondering if the house has actually been prewired for Freeview?

Any help would be appreciated.

Thanks!
Jeffrey



View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
694 posts

Ultimate Geek
+1 received by user: 188


  Reply # 1202081 22-Dec-2014 14:31
Send private message

The socket you are showing is a Belling lee / PAL / P75 ( amongst other names ) and is designed for VHF and UHF TV, not for satellite.

There is a good change that your house is wired for freeview.

Plug in your TV and see if it works, you may need to re-tune it if you have moved area's

Cheers

John





I know enough to be dangerous


3030 posts

Uber Geek
+1 received by user: 1505


  Reply # 1202121 22-Dec-2014 15:34
Send private message

There will be a distribution box somewhere in the house, that collects and splits the signals around the house. I would say it is pre wired for broadcast TV. Have a look in cupboards or possibly in the garage. Ours looks similar to a fuse box. You can organize and control connections from there.




Always be yourself, unless you can be Batman, then always be the Batman



4966 posts

Uber Geek
+1 received by user: 1581


  Reply # 1202147 22-Dec-2014 15:58
Send private message

Another alternative is that the belling lee sockets were there to reticulate the RF output from a Sky decoder, and there is no UHF antenna.

Ultimately, you need to do some more research - either plug in a TV and see if it goes (if it does, great), or trace the cables and see where they go to.

Where are you - is the house in a Freeview|HD (UHF) area?

Alternatively, if there's a Sky dish there, and you don't need HD, then just grab a cheap satellite receiver and plug that in to the dish.

Stu

Hammered
5045 posts

Uber Geek
+1 received by user: 1062

Moderator
Trusted
Lifetime subscriber

  Reply # 1202148 22-Dec-2014 16:02
Send private message

Chances are the house was pre-wired to have a TV in all the rooms, but the wiring hasn't been connected to an aerial for whatever reason.

As above, you will be able to get satellite freeview with a set top box (or if you have a late model Samsung TV) from any of the outlets with F type connecters that have been used for sky.




Keep calm, and carry on posting.

 

 

 

Click to see full size Click to see full size


1927 posts

Uber Geek
+1 received by user: 128


  Reply # 1202186 22-Dec-2014 16:21
Send private message

Is there any TV antenna on the roof at all or just the Sky dish?



13 posts

Geek


  Reply # 1203084 24-Dec-2014 10:33
Send private message

Thanks for the replies guys.

I have plugged in the TV into the wall socket and did not get any TV reception after the auto-tune.

Decided to dig in a little deeper and climbed into the roof space and found these two puppies. Unsure what they are...





And this unterminated cable in the ceiling space - would it be safe to assume that it is to go to the Freeview antenna?



Cheers guys.

891 posts

Ultimate Geek
+1 received by user: 580

Trusted

  Reply # 1203091 24-Dec-2014 10:43
Send private message

That looks like a split of your Sat feed.
You'll need a freeview SAT box to pick anything up on it rather than inbuild freeview UHF on TVs

4966 posts

Uber Geek
+1 received by user: 1581


  Reply # 1203093 24-Dec-2014 10:58
One person supports this post
Send private message

jefisokla:
And this unterminated cable in the ceiling space - would it be safe to assume that it is to go to the Freeview antenna?



Never assume!

The 5 way device looks like a splitter - 1 input, 4 outputs, presumably sending the same signal to several rooms.

You may find the white cable connected to the input is the spare white cable that appears somewhere else.

The other device is a diplexor - it combines or splits two signals in to one - usually a satellite and an RF signal.

Without know where each cable goes though, it's difficult to say how the house has been wired though. It could have been wired with a UHF antenna, or could have been using RF to reticulate the output from a Sky decoder. We can have a guess, but the only way to kow for sure is to trace where the cables go.

I'd suggest before you go any further, do you understand the difference between Freeview|HD delivered as a UHF terrestrial service and the Freeview DTH service delivered via satellite? When you say you want Freeview wiring, which of these are you trying to do? Do you live in an area that has UHF terrestrial transmission?

Given your first post says there is no UHF antenna, but there is a Sky dish, then you have two basic options:

1) Use the dish to receive the DTH satellite Freeview service. This is standard definition, and you will need to buy a satellite reciver (there are a handful of TVs with inbuilt sat tuners, but they are the exception rather than the rule).

2) IF you are in an area with UHF broadcasts, then you can have a UHF antenna installed, and receive the terrestrial transmission. This is high definition and will work straight out of the box on any recent TV bought in NZ.



13 posts

Geek


  Reply # 1203100 24-Dec-2014 11:13
Send private message

Yes I do realise that I have two options - Freeview|HD via UHF and Freeview standard via the satellite dish. Our property is in the "Very likely" for both Freeview|HD and Freeview sat coverage area.

Ideally I would like to have Freeview|HD via UHF antenna but it seems like the property hasn't been prewired for Freeview|HD via UHF. There also isn't a UHF antenna mounted on top of the house.

I woulnd't mind getting a UHF antenna installed but if it is not prewired for it and having to cut walls open to get it working, then I suppose my only option is  to go with Freeview sat or Sky etc..

4966 posts

Uber Geek
+1 received by user: 1581


  Reply # 1203131 24-Dec-2014 12:11
One person supports this post
Send private message

jefisokla: Yes I do realise that I have two options - Freeview|HD via UHF and Freeview standard via the satellite dish. Our property is in the "Very likely" for both Freeview|HD and Freeview sat coverage area.

Excellent!

jefisokla:
Ideally I would like to have Freeview|HD via UHF antenna but it seems like the property hasn't been prewired for Freeview|HD via UHF. There also isn't a UHF antenna mounted on top of the house.

I woulnd't mind getting a UHF antenna installed but if it is not prewired for it and having to cut walls open to get it working, then I suppose my only option is  to go with Freeview sat or Sky etc..


Both systems will work on the same (RG6) cable, and given the four way splitter, the house is wired to distribute something. If you get an antenna installed, and run it in to the input of that four way splitter, then (in theory!) you should have four usable outlets around the house at the other end of those cables. Depending on the other end, you might need to change over the faceplates/outlets.

Banana?
4361 posts

Uber Geek
+1 received by user: 1030

Subscriber

  Reply # 1203132 24-Dec-2014 12:13
Send private message

In the second picture (the one with the diplexor), where does the output cable go?

The White cable in the splitter input, is that the same cable as the one in the third picture?

Looking at it, I think you could probably get Satellite and UHF signal to all rooms, You connect a UHF aerial to one input on the Diplexor, the dish should already be on the other, the out put from that into the input on the splitter, then 4 cables obviously already run to 4 locations in the house.

You may need to get an antenna installer/tech in to sort it all out and test it's all connected properly (and tidily install the antenna - you may even be able to have one installed in the ceiling space if your signal is strong enough).



13 posts

Geek


  Reply # 1203134 24-Dec-2014 12:15
Send private message

That sounds like an option!

So we could potentially disconnect the cable from the Sky dish and connect it to a UHF antenna, while utilising the existing cables and splitters, which will give us Freeview|HD?

4966 posts

Uber Geek
+1 received by user: 1581


  Reply # 1203137 24-Dec-2014 12:19
Send private message

jefisokla:

So we could potentially disconnect the cable from the Sky dish and connect it to a UHF antenna, while utilising the existing cables and splitters, which will give us Freeview|HD?


Yes.

1927 posts

Uber Geek
+1 received by user: 128


  Reply # 1203138 24-Dec-2014 12:21
Send private message

jefisokla: That sounds like an option!

So we could potentially disconnect the cable from the Sky dish and connect it to a UHF antenna, while utilising the existing cables and splitters, which will give us Freeview|HD?


Yes, or you could connect both the dish and UHF as Runningman suggests. The house is adequately wired so you could do either.



13 posts

Geek


  Reply # 1203140 24-Dec-2014 12:26
Send private message

trig42: In the second picture (the one with the diplexor), where does the output cable go?

The White cable in the splitter input, is that the same cable as the one in the third picture?

Looking at it, I think you could probably get Satellite and UHF signal to all rooms, You connect a UHF aerial to one input on the Diplexor, the dish should already be on the other, the out put from that into the input on the splitter, then 4 cables obviously already run to 4 locations in the house.

You may need to get an antenna installer/tech in to sort it all out and test it's all connected properly (and tidily install the antenna - you may even be able to have one installed in the ceiling space if your signal is strong enough).




Yes the white cable in the splitter input is the same one as in the third picture, which is unterminated.

Unsure where the output cable off the diplexor goes, but it looks like its heading towards one of the rooms.

 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel introduces new NUC kits and NUC mini PCs
Posted 16-Aug-2018 11:03


The Warehouse leaps into the AI future with Google
Posted 15-Aug-2018 17:56


Targus set sights on enterprise and consumer growth in New Zealand
Posted 13-Aug-2018 13:47


Huawei to distribute nova 3i in New Zealand
Posted 9-Aug-2018 16:23


Home robot Vector to be available in New Zealand stores
Posted 9-Aug-2018 14:47


Panasonic announces new 2018 OLED TV line up
Posted 7-Aug-2018 16:38


Kordia completes first live 4K TV broadcast
Posted 1-Aug-2018 13:00


Schools get safer and smarter internet with Managed Network Upgrade
Posted 30-Jul-2018 20:01


DNC wants a safer .nz in the coming year
Posted 26-Jul-2018 16:08


Auldhouse becomes an AWS Authorised Training Delivery Partner in New Zealand
Posted 26-Jul-2018 15:55


Rakuten Kobo launches Kobo Clara HD entry level reader
Posted 26-Jul-2018 15:44


Kiwi team reaches semi-finals at the Microsoft Imagine Cup
Posted 26-Jul-2018 15:38


KidsCan App to Help Kiwi Children in Need
Posted 26-Jul-2018 15:32


FUJIFILM announces new high-performance lenses
Posted 24-Jul-2018 14:57


New FUJIFILM XF10 introduces square mode for Instagram sharing
Posted 24-Jul-2018 14:44



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.