Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19
375 posts

Ultimate Geek


  # 1431595 20-Nov-2015 10:37
One person supports this post
Send private message

emailed/pm'd my little list, too good an opportunity to miss :) 


17 posts

Geek


  # 1431636 20-Nov-2015 11:32
Send private message

Jimmy22:
PaulLowman: Just entered this already but did not appear on geekzone forum.

Fast reverse actually went slow motion. Noticed this with fast forward also. Go to play and then rerun fast reverse/forward.
well that one is easy.... Firstly play and pause are interchangeable buttons. When you pause and push rewind it goes into slow mo. ..easy


Ah - Thanks Jimmy22. That will remove that particular issue for me.

 
 
 
 


375 posts

Ultimate Geek


  # 1431654 20-Nov-2015 12:25
Send private message

I suggest you don't remove it ..you will miss a fair few full programs !

23 posts

Geek


  # 1431864 20-Nov-2015 17:27
Send private message

joshhill96: With DLNA

What issues are you experiencing?
What is your host device? E.g iPad, PC, Mac, Linux
Version: e.g Windiws 10, ios9
What kind of file?

Feel free to PM. Or post on here.
Manual PDF progress is well underway and is looking good !


I have had no major issues with playing files from a Synology NAS via ethernet. Very Occasionally, the file will not start, but the segmented circle is spinning. Press stop and play again and all is good.



You're typing with Josh!
1436 posts

Uber Geek

Trusted
Subscriber

  # 1432185 21-Nov-2015 13:51
Send private message

Thanks all for the issue reports, we have sent this yesterday to our software dealopers and will update you on the next release.




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


5 posts

Wannabe Geek


  # 1433200 23-Nov-2015 11:54
Send private message

I have a T1020 that appears to have died over the weekend. I believe one of my kids turned it off while trying to play a DVD (pressing random buttons on all devices under the telly...), and when I turned it back on all that happens is the power light flashes red. I tried leaving it unplugged over night, but when I plugged it back in in the morning it did the same thing. Anything else I can try?



You're typing with Josh!
1436 posts

Uber Geek

Trusted
Subscriber

  # 1433348 23-Nov-2015 15:19
Send private message

nzgrover: I have a T1020 that appears to have died over the weekend. I believe one of my kids turned it off while trying to play a DVD (pressing random buttons on all devices under the telly...), and when I turned it back on all that happens is the power light flashes red. I tried leaving it unplugged over night, but when I plugged it back in in the morning it did the same thing. Anything else I can try?


Looks like there is something wrong with the unit, likely the power supply in the unit /  a capacitor has failed, Please give us a call on 07 929 4123 or 0800 DISHTV to contact us regarding getting the unit sent back for us to have a look at it.




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


 
 
 
 




You're typing with Josh!
1436 posts

Uber Geek

Trusted
Subscriber

  # 1433351 23-Nov-2015 15:21
Send private message

Hi Guys,

We are aware that some customers are having some issues with the on demand apps, 3Now with playback errors, If you are experiencing this issue, please reply back to me stating if you have a S8200, T2200 or T2100 device. If you have a Smart TV and having similar issues, please let me know as well. We are currently investigating.




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


6970 posts

Uber Geek

Trusted

  # 1433362 23-Nov-2015 15:38
Send private message

Plain English warnings would be great, having just talked my parents through a "Media not alive' error... undecided



You're typing with Josh!
1436 posts

Uber Geek

Trusted
Subscriber

  # 1433364 23-Nov-2015 15:40
Send private message

Jaxson: Plain English warnings would be great, having just talked my parents through a "Media not alive' error... undecided


Thanks for that Jaxson, The only thing I can do is make a section in the PDF and iManual regarding jargon and error messages and steps to resolve / descriptions.




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


6970 posts

Uber Geek

Trusted

  # 1433373 23-Nov-2015 16:04
One person supports this post
Send private message

joshhill96:
Jaxson: Plain English warnings would be great, having just talked my parents through a "Media not alive' error... undecided


Thanks for that Jaxson, The only thing I can do is make a section in the PDF and iManual regarding jargon and error messages and steps to resolve / descriptions.


Or change the text to something more specific and indicative of a resolution.

In this case I'm assuming the USB connection/drive hasn't fired up properly for example.  Or put another way, the drive is dead. 

How much of this do you influence here in NZ...

17 posts

Geek


  # 1433517 23-Nov-2015 20:20
One person supports this post
Send private message

A few things :-

- Watched recorded program to end. Pressed stop, library page appears with just watched program highlighted. Red button is annotated as 'Stop' and not 'Delete' although program was recorded quite a while earlier. Pressed Red button and dialog appears asking if one wants to Cancel, Save or Not Save. Select Not Save and response is Unable to Delete. Noticed size of recording shows as NAN. Had to exit library view and re-enter whereupon all works as it should.

- Why are Pause and Play icons back to front. Unlike normal practice the Play icon shows if playing and the Pause icon shows if paused.

- On a couple of occasions when pressing stop after watching a recorded program the library page has appeared but with the top entry highlighted and not the just viewed recording. I deleted an unwatched recording in this manner :-(

- Selected Library page and showed a program being recorded on both its normal channel and the plus 1 channel (Thunderbirds) at the same time.

375 posts

Ultimate Geek


  # 1433532 23-Nov-2015 20:48
One person supports this post
Send private message

Bit of an interesting one for T2200 ... if you spot a TV program in progress on THE GUIDE that you want to record you naturally hit the record button but then it tells you, do you want to record the remaining time left ..if you say yes it merrily records away ..all good. That is until you remember there are plus one channels and that you should just record it there, only to find it says you are already recording and you can't record the same thing twice. Ok so there may be a work around my wife didn't see BUT this seems to be a deeper issue perhaps ? How do you stop a recording in progress you set from the guide and why can't the machine suggest you record on plus one at a later slot in full ?



You're typing with Josh!
1436 posts

Uber Geek

Trusted
Subscriber

  # 1433607 23-Nov-2015 22:25
Send private message

PaulLowman: A few things :-

- Watched recorded program to end. Pressed stop, library page appears with just watched program highlighted. Red button is annotated as 'Stop' and not 'Delete' although program was recorded quite a while earlier. Pressed Red button and dialog appears asking if one wants to Cancel, Save or Not Save. Select Not Save and response is Unable to Delete. Noticed size of recording shows as NAN. Had to exit library view and re-enter whereupon all works as it should.

- Why are Pause and Play icons back to front. Unlike normal practice the Play icon shows if playing and the Pause icon shows if paused.

- On a couple of occasions when pressing stop after watching a recorded program the library page has appeared but with the top entry highlighted and not the just viewed recording. I deleted an unwatched recording in this manner :-(

- Selected Library page and showed a program being recorded on both its normal channel and the plus 1 channel (Thunderbirds) at the same time.


Thanks for this Paul, some of this is feedback and a suggestion which is well valid so I will pass onto the team to look into, In regards to the Thunderbirds can you please go to the first recording of the duplicate, press the YELLOW (Options) then select Record Property, look for the ID number which you can see In the red icons O and OO please provide me the top single icon ID which is for the single recording and then the two rings ID which means series link, repeat the same for the 2nd duplicate and I will forward this through as I have reported this log to our team but I require more from the customers,

Either PM me or reply to this post




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands




You're typing with Josh!
1436 posts

Uber Geek

Trusted
Subscriber

  # 1433608 23-Nov-2015 22:26
Send private message

Jimmy22: Bit of an interesting one for T2200 ... if you spot a TV program in progress on THE GUIDE that you want to record you naturally hit the record button but then it tells you, do you want to record the remaining time left ..if you say yes it merrily records away ..all good. That is until you remember there are plus one channels and that you should just record it there, only to find it says you are already recording and you can't record the same thing twice. Ok so there may be a work around my wife didn't see BUT this seems to be a deeper issue perhaps ? How do you stop a recording in progress you set from the guide and why can't the machine suggest you record on plus one at a later slot in full ?


Ah thanks for that Jimmy! Yes I will get this dealt with as our previous generation boxes had this feature which helped with the plus 1 channels




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


1 | ... | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19
View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Microsoft New Zealand Partner Awards results
Posted 18-Oct-2019 10:18


Logitech introduces new Made for Google keyboard and mouse devices
Posted 16-Oct-2019 13:36


MATTR launches to accelerate decentralised identity
Posted 16-Oct-2019 10:28


Vodafone X-Squad powers up for customers
Posted 16-Oct-2019 08:15


D Link ANZ launches EXO Smart Mesh Wi Fi Routers with McAfee protection
Posted 15-Oct-2019 11:31


Major Japanese retailer partners with smart New Zealand technology IMAGR
Posted 14-Oct-2019 10:29


Ola pioneers one-time passcode feature to fight rideshare fraud
Posted 14-Oct-2019 10:24


Spark Sport new home of NZC matches from 2020
Posted 10-Oct-2019 09:59


Meet Nola, Noel Leeming's new digital employee
Posted 4-Oct-2019 08:07


Registrations for Sprout Accelerator open for 2020 season
Posted 4-Oct-2019 08:02


Teletrac Navman welcomes AI tech leader Jens Meggers as new President
Posted 4-Oct-2019 07:41


Vodafone makes voice of 4G (VoLTE) official
Posted 4-Oct-2019 07:36


2degrees Reaches Milestone of 100,000 Broadband Customers
Posted 1-Oct-2019 09:17


Nokia 1 Plus available in New Zealand from 2nd October
Posted 30-Sep-2019 17:46


Ola integrates Apple Pay as payment method in New Zealand
Posted 25-Sep-2019 09:51



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.