Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | ... | 96
23 posts

Geek


  # 1454724 21-Dec-2015 18:58
Send private message quote this post

I am. I am just using the default settings.

18 posts

Geek


  # 1454795 21-Dec-2015 20:50
Send private message quote this post

I'm running a Harmony One universal remote, I used the Logitech database entry for T2200 and tweaked a couple of buttons, I think just the back (loopy arrow) and the up/down arrows (not the four-way direction button, but the othe two arrows) to switch audio settings but mostly standard from the database.

 
 
 
 




You're typing with Josh!
1430 posts

Uber Geek

Trusted
Subscriber

  # 1454827 21-Dec-2015 21:48
Send private message quote this post

mondograss: Hi Josh, I'm afraid the T2200 is going to be retired from duties for a while as we're still getting problems with jitter\noise\general crappiness etc. Once again it was during the last few minutes of Call the Midwife once it was overlapping with the recording of Love Child immediately afterwards. I'd disabled "Pause Live TV" last week (much to my wifes disgust) and now it only goes to crap on the end of the first recording rather than the start of the second as well (both used to be unwatchable until the first one had stopped). So luckily I was able to stop watching the recording of Midwife and switch over to the recording of Love Child to catch the bit of Midwife that'd been lost. But it is infuriating so we'll be going back to the MagicTV until you get this sorted. Be thankful my wife didn't chuck the T2200 out the window last night!

Yes we have the latest firmware and signal strength is 62% quality is 98%


Hi, Ii'm sorry about your experience with the T2200, we have been working hard to get new patch releases out. Focussing on bugs first then new features. I have passed these details on to the team regarding the recording aspect of this, but the report of jitter and noise of the unit, could you please Private Message me some info about this ? To determine if it's the individual unit itself playing up or not. Send through the serial number as well. 




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands




You're typing with Josh!
1430 posts

Uber Geek

Trusted
Subscriber

  # 1454829 21-Dec-2015 21:51
Send private message quote this post

Jimmy22: pleased i helped you get half of it temporarily sorted, maybe forcing one of the programs to record on plus one ch would be an interim fix, although i can see the frustration . obviously getting magic tv to do record one of the programs would solve it also (while a fix is being sorted)  we seem to tax our machine a fair bit but no issue after disabling live tv .  signal 78% qual 98% also , seems like the processor is being taxed or HDD speed , input output ?  looks like a prime time to send the unit for a test while you use the magic, while the magic still works !  


Josh , just a small thing to add to the perhaps diminishing pile ,  now we have the epic ability to sort series and hold the sort between sessions , how do i exit a series folder but return to the library ?  Exit takes me to Live TV , library button takes me to live tv .  Perhaps there needs to be a back step to library from the specific series folder , it has strangely come up quite often so far.  e.g. i find the series i want to watch an episode from i watch and then perilously delete it  , lol   . i dont want to watch two grotesque programs in a row so i then wish to go back to library to watch something funny or what ever but it kicks me to live tv instead of going back to folder view. what am i missing ?   I use the power of the box to skipp all adds , i dont watch live unless im super desperate.    Actually Mondograss, that could explain why i seem to have less issues than yourself , i am not tying up any tuner with double duty e.g. two channels on the same mux e.g. tv 1 record, tv2 live and tv3 record.   of course im not saying it Should be that way just that at present it Could be that way.  


Have you tried using the back button to exit out of the episode lists of a series folder?

In regards to Mondograss if may be a unit playing itself which rarely happens with a solo unit so will get more info via the PM about this.





Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands




You're typing with Josh!
1430 posts

Uber Geek

Trusted
Subscriber

  # 1454840 21-Dec-2015 22:18
Send private message quote this post

I'm not too sure if this is a Christmas Treat or not but here is the 2015/16 PDF Manuals on Preview Release for you to download: https://drive.google.com/folderview?id=0B_k-CgRf1xjsNXhDaTBFVmNaQUU&usp=sharing

There is a few mistakes but it features more content than the initial release. Let me know what you think?




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


2225 posts

Uber Geek

Trusted
Subscriber

  # 1454953 22-Dec-2015 08:08
Send private message quote this post

Thinking about picking one of these up today and I just have one question that I see has been asked a number of times but not sure if its been answered. Can anyone tell me how the box functions round side by side recordings on the same mux, i.e. one news followed by seven sharp, are there any issues with this?






Delete Social Media

 


My thoughts are my own and are in no way representative of my employer.


375 posts

Ultimate Geek


  # 1455028 22-Dec-2015 09:40
One person supports this post
Send private message quote this post

joshhill96:
Jimmy22: pleased i helped you get half of it temporarily sorted, maybe forcing one of the programs to record on plus one ch would be an interim fix, although i can see the frustration . obviously getting magic tv to do record one of the programs would solve it also (while a fix is being sorted)  we seem to tax our machine a fair bit but no issue after disabling live tv .  signal 78% qual 98% also , seems like the processor is being taxed or HDD speed , input output ?  looks like a prime time to send the unit for a test while you use the magic, while the magic still works !  


Josh , just a small thing to add to the perhaps diminishing pile ,  now we have the epic ability to sort series and hold the sort between sessions , how do i exit a series folder but return to the library ?  Exit takes me to Live TV , library button takes me to live tv .  Perhaps there needs to be a back step to library from the specific series folder , it has strangely come up quite often so far.  e.g. i find the series i want to watch an episode from i watch and then perilously delete it  , lol   . i dont want to watch two grotesque programs in a row so i then wish to go back to library to watch something funny or what ever but it kicks me to live tv instead of going back to folder view. what am i missing ?   I use the power of the box to skipp all adds , i dont watch live unless im super desperate.    Actually Mondograss, that could explain why i seem to have less issues than yourself , i am not tying up any tuner with double duty e.g. two channels on the same mux e.g. tv 1 record, tv2 live and tv3 record.   of course im not saying it Should be that way just that at present it Could be that way.  


Have you tried using the back button to exit out of the episode lists of a series folder?

In regards to Mondograss if may be a unit playing itself which rarely happens with a solo unit so will get more info via the PM about this.



embarrassing moment of the year :(  i chucked the stock remote in the draw moths ago , i forgot that has a back button , oh the lols we had at my house last night.  ill find a spot for back on the Harmony 650

 
 
 
 




You're typing with Josh!
1430 posts

Uber Geek

Trusted
Subscriber

  # 1455645 22-Dec-2015 20:24
Send private message quote this post

geekiegeek: Thinking about picking one of these up today and I just have one question that I see has been asked a number of times but not sure if its been answered. Can anyone tell me how the box functions round side by side recordings on the same mux, i.e. one news followed by seven sharp, are there any issues with this?




Sorry for the late one, The unit can handle up to 4 offsets at the same time so there should be no change with back to back shows.
There will be no issues and everything should record fine.




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands




You're typing with Josh!
1430 posts

Uber Geek

Trusted
Subscriber

  # 1455647 22-Dec-2015 20:26
Send private message quote this post

Jimmy22:
joshhill96:
Jimmy22: pleased i helped you get half of it temporarily sorted, maybe forcing one of the programs to record on plus one ch would be an interim fix, although i can see the frustration . obviously getting magic tv to do record one of the programs would solve it also (while a fix is being sorted)  we seem to tax our machine a fair bit but no issue after disabling live tv .  signal 78% qual 98% also , seems like the processor is being taxed or HDD speed , input output ?  looks like a prime time to send the unit for a test while you use the magic, while the magic still works !  


Josh , just a small thing to add to the perhaps diminishing pile ,  now we have the epic ability to sort series and hold the sort between sessions , how do i exit a series folder but return to the library ?  Exit takes me to Live TV , library button takes me to live tv .  Perhaps there needs to be a back step to library from the specific series folder , it has strangely come up quite often so far.  e.g. i find the series i want to watch an episode from i watch and then perilously delete it  , lol   . i dont want to watch two grotesque programs in a row so i then wish to go back to library to watch something funny or what ever but it kicks me to live tv instead of going back to folder view. what am i missing ?   I use the power of the box to skipp all adds , i dont watch live unless im super desperate.    Actually Mondograss, that could explain why i seem to have less issues than yourself , i am not tying up any tuner with double duty e.g. two channels on the same mux e.g. tv 1 record, tv2 live and tv3 record.   of course im not saying it Should be that way just that at present it Could be that way.  


Have you tried using the back button to exit out of the episode lists of a series folder?

In regards to Mondograss if may be a unit playing itself which rarely happens with a solo unit so will get more info via the PM about this.



embarrassing moment of the year :(  i chucked the stock remote in the draw moths ago , i forgot that has a back button , oh the lols we had at my house last night.  ill find a spot for back on the Harmony 650


I'm dealing with a Mother who can't figure out most of the S8200 so you should be fine! ha ha




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


128 posts

Master Geek


  # 1455850 23-Dec-2015 10:16
Send private message quote this post

AndrewtheAmbo: I am. I am just using the default settings.


hfkiwi: I'm running a Harmony One universal remote, I used the Logitech database entry for T2200 and tweaked a couple of buttons, I think just the back (loopy arrow) and the up/down arrows (not the four-way direction button, but the othe two arrows) to switch audio settings but mostly standard from the database.


Thanks guys. I worked out what I was doing wrong. I was looking up the device using 'Aerialbox' and couldn't find it.  Looking under 'Dish TV', I found it right away.

375 posts

Ultimate Geek


  # 1455852 23-Dec-2015 10:21
Send private message quote this post

BuckoNZ:
AndrewtheAmbo: I am. I am just using the default settings.


hfkiwi: I'm running a Harmony One universal remote, I used the Logitech database entry for T2200 and tweaked a couple of buttons, I think just the back (loopy arrow) and the up/down arrows (not the four-way direction button, but the othe two arrows) to switch audio settings but mostly standard from the database.


Thanks guys. I worked out what I was doing wrong. I was looking up the device using 'Aerialbox' and couldn't find it.  Looking under 'Dish TV', I found it right away.


that is interesting , i swear i found mine the opposite way a month or two back :)  

2225 posts

Uber Geek

Trusted
Subscriber

  # 1456092 23-Dec-2015 15:55
One person supports this post
Send private message quote this post

Got my new T2200 hooked up and running, recorded my first show. So far, so good. Must say though that I did have a trouble with the included remote, seemed like it was underpowered or something as it wouldn't always register button clicks. Harmony Elite is working great though.




Delete Social Media

 


My thoughts are my own and are in no way representative of my employer.




You're typing with Josh!
1430 posts

Uber Geek

Trusted
Subscriber

  # 1458070 28-Dec-2015 11:44
Send private message quote this post

geekiegeek: Got my new T2200 hooked up and running, recorded my first show. So far, so good. Must say though that I did have a trouble with the included remote, seemed like it was underpowered or something as it wouldn't always register button clicks. Harmony Elite is working great though.


Good to hear that things are running well, Enjoy!




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


128 posts

Master Geek


  # 1458279 28-Dec-2015 22:03
Send private message quote this post

Just witnessed something odd. Just a minute ago, just saw my T2200 (which isn't completely setup yet) boot up on it's own and then power down again.

Any ideas?



You're typing with Josh!
1430 posts

Uber Geek

Trusted
Subscriber

  # 1458348 29-Dec-2015 08:02
Send private message quote this post

BuckoNZ: Just witnessed something odd. Just a minute ago, just saw my T2200 (which isn't completely setup yet) boot up on it's own and then power down again.

Any ideas?


Did this happen when the TV was turning on or switching HDMI outputs? There is a few things that can wake this up, software check or booking list update. Let me know if this happens again at certain times.




Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


1 | ... | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | ... | 96
View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Facebook Portal to land in New Zealand
Posted 19-Sep-2019 18:35


Amazon Studios announces New Zealand as location for its upcoming series based on The Lord of the Rings
Posted 18-Sep-2019 17:24


The Warehouse chooses Elasticsearch service
Posted 18-Sep-2019 13:55


Voyager upgrades core network to 100Gbit
Posted 18-Sep-2019 13:52


Streaming service Acorn TV launches in New Zealand with selection with British shows
Posted 18-Sep-2019 08:55


Bitcoin.com announces partnership with smartphone manufacturer HTC
Posted 16-Sep-2019 21:30


Finalists Announced for Microsoft NZ Partner Awards
Posted 16-Sep-2019 19:37


OPPO Showcases New CameraX Capabilities at Google Developer Days China 2019
Posted 15-Sep-2019 12:42


New Zealand PC Market returns to growth
Posted 15-Sep-2019 12:24


Home sensor charity director speaks about the preventable death which drives her to push for healthy homes
Posted 11-Sep-2019 08:46


Te ao Maori Minecraft world set to inspire Kiwi students
Posted 11-Sep-2019 08:43


Research reveals The Power of Games in New Zealand
Posted 11-Sep-2019 08:40


Ring Door View Cam now available in New Zealand
Posted 11-Sep-2019 08:38


Vodafone NZ to create X Squad
Posted 10-Sep-2019 10:25


Huawei nova 5T to be available 20th September
Posted 5-Sep-2019 11:55



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.