Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | ... | 96
39 posts

Geek


  # 1611691 15-Aug-2016 08:55
Send private message quote this post

Bug (V1.30)

 

Multi-part (not series) programs not recorded

 

Not sure if "multi-part programs" is the correct terminology, so here is an example.

 

Use the EPG/guide button on the remote to bring up the Freeview guide.

 

Go to Sat 20 Aug 2016 with channel = Prime

 

Select  program 00:30 Road to Rio and press the red button to set up a recording

 

When asked to record series select "No"

 

The display will now show the following four programs set to record once

 

00:30 Rio on Prime [R]

 

06:00 Good Morning Rio [R]

 

09:30 Rio on Prime [R]

 

12:30 Rio on Prime [R]

 

Canceling the the recording for any one of these programs cancels them all. This is what I am calling a multi-part recording

 

 

 

The bug is that in this case only "00:30 Rio on Prime" will be recorded. After the event, a message appears in the schedule "Looking repeat event" with event type "Single"


39 posts

Geek


  # 1611723 15-Aug-2016 09:47
Send private message quote this post

Bug (V1.30)

 

Extended info for a recorded program that you are playing back, is wrong after a new program starts recording.

 

The recorded list (library) is episode mode with most recent recording at the top of the list.

 

Extended info appears if you press the info button twice during play back. It contains a description of the recorded program.

 

If a new recording starts while you are watching an item from the recorded library, the position of all the recordings in the library change (move down) and the wrong extended information is now displayed for recording that you are playing back.


 
 
 
 




You're typing with Josh!
1426 posts

Uber Geek

Trusted
Subscriber

  # 1611771 15-Aug-2016 10:53
Send private message quote this post

Elgin:

 

Bug (V1.30)

 

Multi-part (not series) programs not recorded

 

Not sure if "multi-part programs" is the correct terminology, so here is an example.

 

Use the EPG/guide button on the remote to bring up the Freeview guide.

 

Go to Sat 20 Aug 2016 with channel = Prime

 

Select  program 00:30 Road to Rio and press the red button to set up a recording

 

When asked to record series select "No"

 

The display will now show the following four programs set to record once

 

00:30 Rio on Prime [R]

 

06:00 Good Morning Rio [R]

 

09:30 Rio on Prime [R]

 

12:30 Rio on Prime [R]

 

Canceling the the recording for any one of these programs cancels them all. This is what I am calling a multi-part recording

 

 

 

The bug is that in this case only "00:30 Rio on Prime" will be recorded. After the event, a message appears in the schedule "Looking repeat event" with event type "Single"

 

 

 

 

This is something you will need to talk to SKY TV about as they release the data on the EPG to Freeview, unfortunately we are unable to do much about how listings are set as they contain a unique code in which the PVR understands what to record. 





Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


39 posts

Geek


  # 1612270 16-Aug-2016 00:20
One person supports this post
Send private message quote this post

joshhill96:

 

Elgin:

 

Bug (V1.30)

 

Multi-part (not series) programs not recorded

 

Not sure if "multi-part programs" is the correct terminology, so here is an example.

 

Use the EPG/guide button on the remote to bring up the Freeview guide.

 

Go to Sat 20 Aug 2016 with channel = Prime

 

Select  program 00:30 Road to Rio and press the red button to set up a recording

 

When asked to record series select "No"

 

The display will now show the following four programs set to record once

 

00:30 Rio on Prime [R]

 

06:00 Good Morning Rio [R]

 

09:30 Rio on Prime [R]

 

12:30 Rio on Prime [R]

 

Canceling the the recording for any one of these programs cancels them all. This is what I am calling a multi-part recording

 

 

 

The bug is that in this case only "00:30 Rio on Prime" will be recorded. After the event, a message appears in the schedule "Looking repeat event" with event type "Single"

 

 

 

 

This is something you will need to talk to SKY TV about as they release the data on the EPG to Freeview, unfortunately we are unable to do much about how listings are set as they contain a unique code in which the PVR understands what to record. 

 

 

A similar thing happens when a program is interrupted by the live lotto draw on a Saturday night. As this is clearly a possible recording scenario, I think that you need to look into why the PVR is not handling it correctly, rather than blaming the broadcaster! If multiple EPG entries are linked, why can't each have an entry in the list of scheduled recordings? At the moment only the first entry is added to the list, so that is the only one that gets recorded.

 

 

 

 


30 posts

Geek


  # 1612289 16-Aug-2016 07:17
Send private message quote this post

Yes I reported a problem whereby any program that is interrupted by the lotto draw gets recorded at the regular time and again at the +1 time. Even if it's only in the schedule once and removing it and readding it doesn't help.

17 posts

Geek


  # 1612375 16-Aug-2016 11:01
Send private message quote this post

Hello, I have installed the T2200, I am not complaining, but just wanted to be thoroughly familiar with the unit and its capabilities. In the library all of my recordings are automatically locked. Dish TV suggests that I reboot to the default, which I am happy to do and no doubt will fix the problem. However is there a setting change to do this, or how did I get to do this at all. Probably as a result of the lock, everyting I do requires me to input my password. Unlock, delete, enter library, play library. Very time consuming. Any ideas where the setting is that I have changed.




You're typing with Josh!
1426 posts

Uber Geek

Trusted
Subscriber

  # 1612461 16-Aug-2016 13:31
Send private message quote this post

mondograss: Yes I reported a problem whereby any program that is interrupted by the lotto draw gets recorded at the regular time and again at the +1 time. Even if it's only in the schedule once and removing it and readding it doesn't help.

 

Hi mondograss

 

Recording faults were fixed in this latest firmware version v1.30 please make sure that your device is updated. 

 

Thanks





Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


 
 
 
 




You're typing with Josh!
1426 posts

Uber Geek

Trusted
Subscriber

  # 1612478 16-Aug-2016 13:46
Send private message quote this post

surfwatch:

 

Hello, I have installed the T2200, I am not complaining, but just wanted to be thoroughly familiar with the unit and its capabilities. In the library all of my recordings are automatically locked. Dish TV suggests that I reboot to the default, which I am happy to do and no doubt will fix the problem. However is there a setting change to do this, or how did I get to do this at all. Probably as a result of the lock, everyting I do requires me to input my password. Unlock, delete, enter library, play library. Very time consuming. Any ideas where the setting is that I have changed.

 

 

To Factory Reset simply head to Installation > Factory Reset  Enter in your PIN code then the unit will reset all settings and rescan for the channels. You will need to go back to the EPG and book your shows again. Recorded content will not be erased. 

 

 





Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


39 posts

Geek


  # 1614165 19-Aug-2016 10:23
Send private message quote this post

Josh,

 

With the one year anniversary of the release of the T2200 coming up on the 1st September, can you tell us when the recording rewind function will be working? It seem like this is function is fundamental to the operation of a PVR and should have been working from the start.


8800 posts

Uber Geek

Lifetime subscriber

  # 1614442 19-Aug-2016 16:11
Send private message quote this post

the only issue i have with rewinding is the picture sometimes freezes, but it definitely rewinds faster than 2x


39 posts

Geek


  # 1615532 22-Aug-2016 10:26
Send private message quote this post

For me, rewinding a recording consistently locks up video playback. This video illustrates the problem in detail...

 

https://db.tt/QwMmP0l0

 

 

 

 

 

 


375 posts

Ultimate Geek


  # 1615569 22-Aug-2016 10:47
Send private message quote this post

"

 

"This video contains content from International Olympic Committee, who has blocked it on copyright grounds.  " 

 

lol  , oh well give it a crack on some local content i guess  where sky isn't watching .  

 

 

 

What you are describing is what used to happen before updates occurred in my experience.   I checked the recording around Lotto on the weekend and it no longer doubles up the recording FYI Josh.

 

 

 

A factory reset is still highly recommended to attempt to fix this  

 

 

 

 

 

 


39 posts

Geek


  # 1615584 22-Aug-2016 10:56
Send private message quote this post

Try the new link above...

 

Tried a factory reset. It does not fix these problems.


375 posts

Ultimate Geek


  # 1615611 22-Aug-2016 11:20
Send private message quote this post

cools, that video is 702 Mb !  Perhaps lower the quality .

 

 

 

I think you should send your T2200 in for a factory overhaul , its not normal given you are running V1.30  

 

for the record i dont run live pause and it seems to take the overhead off the unit and get acceptable general use.

 

 

 

 




You're typing with Josh!
1426 posts

Uber Geek

Trusted
Subscriber

  # 1615760 22-Aug-2016 13:23
Send private message quote this post

Elgin:

 

For me, rewinding a recording consistently locks up video playback. This video illustrates the problem in detail...

 

https://db.tt/QwMmP0l0 

 

 

 

Thanks for sending this through, our team has confirmed that this issue will be fixed in the next software update (Details TBC on day) 

 

 





Currently working with Freeview NZ and Owner of Tech Plus Services Limited
Former Consultant at Spark New Zealand Trading Limited, DISH TV Technologies. 

 

Travel Geek: Brazil, Chile, New Caledonia, United States, Fiji, Vanuatu, Australia, Cook Islands


1 | ... | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | ... | 96
View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Bitcoin.com announces partnership with smartphone manufacturer HTC
Posted 16-Sep-2019 21:30


Finalists Announced for Microsoft NZ Partner Awards
Posted 16-Sep-2019 19:37


OPPO Showcases New CameraX Capabilities at Google Developer Days China 2019
Posted 15-Sep-2019 12:42


New Zealand PC Market returns to growth
Posted 15-Sep-2019 12:24


Home sensor charity director speaks about the preventable death which drives her to push for healthy homes
Posted 11-Sep-2019 08:46


Te ao Maori Minecraft world set to inspire Kiwi students
Posted 11-Sep-2019 08:43


Research reveals The Power of Games in New Zealand
Posted 11-Sep-2019 08:40


Ring Door View Cam now available in New Zealand
Posted 11-Sep-2019 08:38


Vodafone NZ to create X Squad
Posted 10-Sep-2019 10:25


Huawei nova 5T to be available 20th September
Posted 5-Sep-2019 11:55


Kogan.com launches prepay challenger brand Kogan Mobile in New Zealand
Posted 3-Sep-2019 11:42


Pagan Online available now
Posted 27-Aug-2019 20:22


Starship hopes new app will help combat antibiotic resistance challenges
Posted 27-Aug-2019 19:43


Intel expands 10th Gen Intel Core Mobile processor family
Posted 23-Aug-2019 10:22


Digital innovation drives new investment provider
Posted 23-Aug-2019 08:29



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.