Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




2 posts

Wannabe Geek


Topic # 182472 17-Oct-2015 12:00
Send private message

Hi all - have an odd problem. Moved the satellite dish yesterday due to roof alteration at home in Chch. Relocated and aligned to correct azimuth etc however no signal ! Except I found there is signal with the cable unplugged from LNB - All channels too !! ( very odd) Can someone advise whats going on here please? I have checked cable continuity which is fine plus it was working ok before moving. Only difference - moved unit and new cable fitting to LNB. Any clues gratefully appreciated! thanks

Create new topic
1851 posts

Uber Geek
+1 received by user: 103


  Reply # 1408181 17-Oct-2015 12:06
Send private message

It's not possible to receive any satellite channels if your satellite box is unplugged from the LNB.
It sounds to me like you have a Freeview TV which you have connected to your dish instead of a UHF antenna. Just what exactly is your setup?



2 posts

Wannabe Geek


  Reply # 1408193 17-Oct-2015 12:28
Send private message

Hi - yes it is .Sorry was not clear enough. Its a Sony TV with Freeview built in. We have been connected to the existing Sky dish for last couple years with no problem until I moved it yesterday. 
cheers

 
 
 
 


6683 posts

Uber Geek
+1 received by user: 2108

Subscriber

  Reply # 1408203 17-Oct-2015 13:06
Send private message

i doubt its a freeview satellite TV, it will more than likely be freeviewHD which will be UHF, so coneecting it to your sky dish is not what you want to be doing


4323 posts

Uber Geek
+1 received by user: 1203


  Reply # 1408205 17-Oct-2015 13:07
One person supports this post
Send private message

Wow. You must be in a good signal area and the cable is working as your antenna, not the dish

Best solution is instal the correct antenna

1424 posts

Uber Geek
+1 received by user: 109

Subscriber

Reply # 1408208 17-Oct-2015 13:09
Send private message

did you use a satellite set top box.  I dint think Sony that age had a satellite tuner built in as well as terrestrial.  FREEVIEW TV doesnt necessarily work with both terrestrial and satellite, only some do which have both tuners in.  If your sony only has 1 tuner then connecting to satellite wont work




HTPC Intel Pentium G3258 cpu, Gigabyte H97n-wifi motherboard, , 8GB DDR3 ram, onboard  graphics. Hauppuage HVR 5500 tuner,  Silverstone LC16M case, Windows 10 pro 64 bit using Nextpvr and Kodi


1851 posts

Uber Geek
+1 received by user: 103


  Reply # 1408243 17-Oct-2015 14:00
Send private message

PauliB: Hi - yes it is .Sorry was not clear enough. Its a Sony TV with Freeview built in. We have been connected to the existing Sky dish for last couple years with no problem until I moved it yesterday. 
cheers

Well there's your problem. The TV has a UHF Tuner and requires to be connected to a UHF antenna, not a Dish which is for satellite reception. Your TV does not have a satellite tuner. If you are receiving all channels on just the co-ax then you only need to add a small UHF antenna on the end of the coax or perhaps even a cheap indoor UHF antenna may suffice.

553 posts

Ultimate Geek
+1 received by user: 15

Subscriber

  Reply # 1426233 11-Nov-2015 13:50
Send private message

PauliB: Hi all - have an odd problem. Moved the satellite dish yesterday due to roof alteration at home in Chch. Relocated and aligned to correct azimuth etc however no signal ! Except I found there is signal with the cable unplugged from LNB - All channels too !! ( very odd) Can someone advise whats going on here please? I have checked cable continuity which is fine plus it was working ok before moving. Only difference - moved unit and new cable fitting to LNB. Any clues gratefully appreciated! thanks


If you were doing this without an actual signal meter, I doubt you'll be able to lock on to a satellite that is 30,000km away (Yes! 30,000 km!!)  Get someone with the proper equipment to align the dish correctly otherwise even if you do manage to strike it lucky and get some signal, you'll probably find it'll cut out at the first sign of rain due to being on the 'edge' of the signal.

4323 posts

Uber Geek
+1 received by user: 1203


  Reply # 1426293 11-Nov-2015 15:35
Send private message

illicit:
PauliB: Hi all - have an odd problem. Moved the satellite dish yesterday due to roof alteration at home in Chch. Relocated and aligned to correct azimuth etc however no signal ! Except I found there is signal with the cable unplugged from LNB - All channels too !! ( very odd) Can someone advise whats going on here please? I have checked cable continuity which is fine plus it was working ok before moving. Only difference - moved unit and new cable fitting to LNB. Any clues gratefully appreciated! thanks


If you were doing this without an actual signal meter, I doubt you'll be able to lock on to a satellite that is 30,000km away (Yes! 30,000 km!!)  Get someone with the proper equipment to align the dish correctly otherwise even if you do manage to strike it lucky and get some signal, you'll probably find it'll cut out at the first sign of rain due to being on the 'edge' of the signal.


The OP doesn't have a satellite receiver and is not receiving a satellite signal - (S)he's receiving a UHF DVB-T signal from a terrestrial transmitter.

Banana?
3908 posts

Uber Geek
+1 received by user: 792

Subscriber

  Reply # 1426295 11-Nov-2015 15:38
Send private message

Legend, receiving UHF off a Satellite dish.

 

Must be right under a UHF transmitter - the only 'antenna' it looks like you have got is the cable running to the dish.

 

 

As mentioned above, you need a UHF aerial. Or a coat hanger by the sounds of it.

6 posts

Wannabe Geek


  Reply # 1428383 15-Nov-2015 16:39
Send private message

same happened with me. Sugarloaf was 1.5 km away and satellite cable with lnb at the end was connected. Was working mint, but changed to Uhf just to be safe


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Public Wi-Fi plus cloud file sharing
Posted 18-Aug-2017 11:20


D-Link NZ launches professional Wireless AC Wave 2 Access Point for businesses
Posted 17-Aug-2017 19:25


Garmin introduces the Rino 700 five-watt two-way handheld radio
Posted 17-Aug-2017 19:04


Garmin announces the Foretrex 601 and Foretrex 701 Ballistic Edition for outdoor and tactical use
Posted 17-Aug-2017 19:02


Brightstar announces new distribution partnership with Samsung Knox platform in Australia
Posted 17-Aug-2017 17:07


Free gig-enabled WiFi network extends across Dunedin
Posted 17-Aug-2017 17:04


Samsung expands with connect Gear S3 Frontier
Posted 17-Aug-2017 15:55


Fact-checking Southern Cross Next cable is fastest to USA
Posted 17-Aug-2017 13:57


Thurrott says Microsoft Surface is dead last for reliability
Posted 16-Aug-2017 15:19


LibreOffice 5.4 works better with Microsoft Office files
Posted 16-Aug-2017 13:32


Certus launches Cognition
Posted 14-Aug-2017 09:31


Spark adds Cambridge, Turangi to 4.5G network
Posted 10-Aug-2017 17:55


REANNZ network to receive ongoing Government funding through to 2024
Posted 10-Aug-2017 16:05


Chorus backhaul starts with 2degrees
Posted 10-Aug-2017 15:49


New Zealanders cool on data analytics catching benefit fraud
Posted 10-Aug-2017 09:56



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.