Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24
nzwogboy
93 posts

Master Geek


  #156630 13-Aug-2008 16:18
Send private message

daskip:
nzwogboy: What's the story with using the Dual LNB that sky installs? Has anyone got this working? I beleive it has a Low Band of 10750 and high band of 11800, not sure what the transition frequency is though?? Anybody using the same dish/LNB?


Its all good (ie it is what I am doing), have a look at a post back on page 7 by rustygonad which describes how to tune it.  Mine was a 10750 though some will be 11300.  Look in your advanced settings in sky - should tell you what number you need to enter.


Yes I read that post but it says to use a single LNB, we have a dual LNB. What settings do I use for the 10750 Dual LNB?

daskip
79 posts

Master Geek


  #156686 13-Aug-2008 20:16
Send private message

Still use the settings in that post (10750).  I have a dual lnb as well, tis fine.

 
 
 
 


daskip
79 posts

Master Geek


  #156690 13-Aug-2008 20:23
Send private message

ifflanb: Ah but can you use XMLTVNZ instead of getting the EPG over the air?


yup of course though kind of annoying to have to do when its just "right there" with no setup/admin~!! ;)

xfire
7 posts

Wannabe Geek


  #156694 13-Aug-2008 20:42
Send private message

Hi there, did you guys have to make adjustments to your power settings for your tuner card for preventing it shutting down your sky decoder?

daskip
79 posts

Master Geek


  #156706 13-Aug-2008 21:09
Send private message

No not here (using hauppauge hvr 3000).  If you are having trouble with it though one possible solution is to use a splitter that is not dual power pass... so the power to the lnb is just from the sky box. 

That given I'm using a dual power pass splitter without problems at the moment.

xfire
7 posts

Wannabe Geek


  #156718 13-Aug-2008 21:28
Send private message

Thanks I'm using the same card, can you remember the process youwent through to tune in the card. I am using a splitter so should be ok. Possibly I have some of my config wrong :)

ifflanb
13 posts

Geek


  #156738 13-Aug-2008 22:23
Send private message

Sorry to go on, but are you saying that if you use XMLTVNZ with the TV Pack you can then watch and schedule Digital HD Freeview tv using the guide?


 
 
 
 


CYaBro
3342 posts

Uber Geek

Subscriber

  #156748 13-Aug-2008 22:57
Send private message

nzwogboy:
daskip:
nzwogboy: What's the story with using the Dual LNB that sky installs? Has anyone got this working? I beleive it has a Low Band of 10750 and high band of 11800, not sure what the transition frequency is though?? Anybody using the same dish/LNB?


Its all good (ie it is what I am doing), have a look at a post back on page 7 by rustygonad which describes how to tune it.  Mine was a 10750 though some will be 11300.  Look in your advanced settings in sky - should tell you what number you need to enter.


Yes I read that post but it says to use a single LNB, we have a dual LNB. What settings do I use for the 10750 Dual LNB?


I have a dual LNB like that and the Sky decoder is configured as you have said but I just followed what rusty said and chose single and set it to 10750 and it works.

Another problem I have is that now, after configured the Sky decoder via the PVR150, the guide has 999 channels listed!
I assume this is because the Sky decoder can handle that many channels.
How do I remove all these extra unneeded channels without having to manually untick them all from the guide settings??

Nety
2584 posts

Uber Geek

Mod Emeritus
Trusted
Lifetime subscriber

  #156783 14-Aug-2008 08:54
Send private message

ifflanb: Sorry to go on, but are you saying that if you use XMLTVNZ with the TV Pack you can then watch and schedule Digital HD Freeview tv using the guide?



There is no HD support under Media centre.







Media centre PC - Case Silverstone LC16M with 2 X 80mm AcoustiFan DustPROOF, MOBO Gigabyte MA785GT-UD3H, CPU AMD X2 240 under volted, RAM 4 Gig DDR3 1033, HDD 120Gig System/512Gig data, Tuners 2 X Hauppauge HVR-3000, 1 X HVR-2200, Video Palit GT 220, Sound Realtek 886A HD (onboard), Optical LiteOn DH-401S Blue-ray using TotalMedia Theatre Power Corsair VX Series, 450W ATX PSU OS Windows 7 x64

Nety
2584 posts

Uber Geek

Mod Emeritus
Trusted
Lifetime subscriber

  #156784 14-Aug-2008 08:56
Send private message

daskip:
ifflanb: Ah but can you use XMLTVNZ instead of getting the EPG over the air?


yup of course though kind of annoying to have to do when its just "right there" with no setup/admin~!! ;)


So you have set that up? I could not get it working as media centre now seems to look somewhere else for the web site information.







Media centre PC - Case Silverstone LC16M with 2 X 80mm AcoustiFan DustPROOF, MOBO Gigabyte MA785GT-UD3H, CPU AMD X2 240 under volted, RAM 4 Gig DDR3 1033, HDD 120Gig System/512Gig data, Tuners 2 X Hauppauge HVR-3000, 1 X HVR-2200, Video Palit GT 220, Sound Realtek 886A HD (onboard), Optical LiteOn DH-401S Blue-ray using TotalMedia Theatre Power Corsair VX Series, 450W ATX PSU OS Windows 7 x64

munchkin
939 posts

Ultimate Geek

Trusted

  #156785 14-Aug-2008 08:56
Send private message

Nety: 
There is no HD support under Media centre.

Not natively, no. There are ways around this (as previously discussed).




munchkin | Troll | Author | Artist | Citizen | Friend | Misanthrope

Join us in the Geekzone IRC channel!

 


All information contained in posts made by me shall be treated as PotatoZoo's own personal opinion unless otherwise specified.

 


Mattv
241 posts

Master Geek


  #156791 14-Aug-2008 09:17
Send private message

Has anyone found a way to stop the beta .dll that allows h.264 from timebombing yet? (assuming it will some time soon)

nzwogboy
93 posts

Master Geek


  #156799 14-Aug-2008 09:29
Send private message

munchkin:
Nety: 
There is no HD support under Media centre.

Not natively, no. There are ways around this (as previously discussed).


Are you talking about the beta H.264 dll or is there a different way??

daskip
79 posts

Master Geek


  #156809 14-Aug-2008 09:42
Send private message

Nety:
daskip:
ifflanb: Ah but can you use XMLTVNZ instead of getting the EPG over the air?


yup of course though kind of annoying to have to do when its just "right there" with no setup/admin~!! ;)


So you have set that up? I could not get it working as media centre now seems to look somewhere else for the web site information.


No was referring to the MHEG5 guide being "right there", never bothered to use XMLTVNZ.

Asmodeus
1008 posts

Uber Geek


  #156831 14-Aug-2008 10:41
Send private message

Mattv: Has anyone found a way to stop the beta .dll that allows h.264 from timebombing yet? (assuming it will some time soon)


Turn your htpc's clock back a year Tongue out

Seriously though, is it possible to successfully "edit" such dll files? If not, why not, and if so, why hasnt someone done it?




HTPC: Silverstone Crown CW02 case | Asus P5Q-L main board | Intel Dual core E8400 3.0GHz CPU | Thermalright Ultra120-Extreme Passive CPU Cooler | Blackgold BTG3540 TV Tuner & Hauppauge PVR-150 MCE Edition | Asus EN9600GT-Silent Passive GPU | 4GB Supertalent DDR2 800 RAM | 5+TB HDD space | LiteOn DH-401S BD/DVD/CD reader | Corsair HX-520w PSU | 1 single Noctua Silent Case fan | Logitech diNovo Bluetooth Media Desktop | Logitech Harmony 785 Universal Remote | Logitech Wireless Rumblepad 2 | Windows 7 Media Center, MediaBrowser & Arcsoft Total Media Theatre

1 | ... | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24
View this topic in a long page with up to 500 replies per page Create new topic





News »

Nanoleaf enhances lighting line with launch of Triangles and Mini Triangles
Posted 17-Oct-2020 20:18


Synology unveils DS1621+ 
Posted 17-Oct-2020 20:12


Ingram Micro introduces FootfallCam to New Zealand channel
Posted 17-Oct-2020 20:06


Dropbox adopts Virtual First working policy
Posted 17-Oct-2020 19:47


OPPO announces Reno4 Series 5G line-up in NZ
Posted 16-Oct-2020 08:52


Microsoft Highway to a Hundred expands to Asia Pacific
Posted 14-Oct-2020 09:34


Spark turns on 5G in Auckland
Posted 14-Oct-2020 09:29


AMD Launches AMD Ryzen 5000 Series Desktop Processors
Posted 9-Oct-2020 10:13


Teletrac Navman launches integrated multi-camera solution for transport and logistics industry
Posted 8-Oct-2020 10:57


Farmside hits 10,000 RBI customers
Posted 7-Oct-2020 15:32


NordVPN starts deploying colocated servers
Posted 7-Oct-2020 09:00


Google introduces Nest Wifi routers in New Zealand
Posted 7-Oct-2020 05:00


Orcon to bundle Google Nest Wifi router with new accounts
Posted 7-Oct-2020 05:00


Epay and Centrapay partner to create digital gift cards
Posted 2-Oct-2020 17:34


Inseego launches 5G MiFi M2000 mobile hotspot
Posted 2-Oct-2020 14:53









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.