Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


2314 posts

Uber Geek
+1 received by user: 1081

Trusted
Subscriber

Topic # 225674 29-Nov-2017 22:54
Send private message

Quick question - if I replace my rooftop satellite with a UFH aerial, can the UHF aerial be connected to the existing satellite cable?


Create new topic
1869 posts

Uber Geek
+1 received by user: 1019


  Reply # 1910795 29-Nov-2017 23:09
Send private message

More than likely, yes. Assuming the cable is in good nick of course.




Location: Dunedin

977 posts

Ultimate Geek
+1 received by user: 91


  Reply # 1910801 29-Nov-2017 23:48
Send private message

I've just done this myself. Cut the RG6 cable from the sky dish . . . added the appropriate connector and hooked up to my aerial. All is working well so ripped the sky dish from the roof and discarded. 


4910 posts

Uber Geek
+1 received by user: 1540


  Reply # 1910815 30-Nov-2017 06:35
Send private message

Cable to a satellite dish should be RG6 - this is rated to a slightly higher spec than what is required for UHF TV, so is normally a good choice to use.




2314 posts

Uber Geek
+1 received by user: 1081

Trusted
Subscriber

  Reply # 1910833 30-Nov-2017 07:38
Send private message

Great, as I thought. Thanks all.


656 posts

Ultimate Geek
+1 received by user: 53

Trusted

  Reply # 1910834 30-Nov-2017 07:39
Send private message

RunningMan:

this is rated to a slightly higher spec than what is required for UHF TV.



Can you elaborate on this please?

4910 posts

Uber Geek
+1 received by user: 1540


  Reply # 1910846 30-Nov-2017 08:16
Send private message

You can get away with greater attenuation of higher frequencies on a cable being used for UHF TV as opposed to a sat dish. UHF TV will use up to approx 800MHz, whereas you will need up to approx 2GHz to cable to a sat dish.


113 posts

Master Geek
+1 received by user: 63


  Reply # 1910878 30-Nov-2017 09:26
Send private message

Yeah, will definitely work using the Sat cable, I do this all the time to save re-running new cabling.

 

 

 

The Sat dish cable is more likely higher quality than what is needed for UHF anyway.


88 posts

Master Geek
+1 received by user: 59


  Reply # 1910948 30-Nov-2017 10:49
Send private message

Why not just fix a diplexer at each end of the existing RG6 cable and leave the satellite dish on the roof for future flexibility?

 

https://www.dishtv.co.nz/index.php?route=product/product&product_id=92 


1991 posts

Uber Geek
+1 received by user: 155

Trusted

  Reply # 1910959 30-Nov-2017 10:52
Send private message

RunningMan:

 

Cable to a satellite dish should be RG6 - this is rated to a slightly higher spec than what is required for UHF TV, so is normally a good choice to use.

 

 

 

 

They recommend RG6 for all new UHF installs these days.





Generally known online as OpenMedia, now working for Red Hat New Zealand as a Solution Architect for all things Linux, Virtual and of course Cloud. Still playing with MythTV and digital media on the side.



2314 posts

Uber Geek
+1 received by user: 1081

Trusted
Subscriber

  Reply # 1911120 30-Nov-2017 14:03
Send private message

farcus:

 

I've just done this myself. Cut the RG6 cable from the sky dish . . . added the appropriate connector and hooked up to my aerial. All is working well so ripped the sky dish from the roof and discarded. 

 

 

Thanks - where did you purchase the UHF aerial and connector from? Is it straightforward for someone with basic skills (me)?


Banana?
4331 posts

Uber Geek
+1 received by user: 1016

Subscriber

  Reply # 1911121 30-Nov-2017 14:09
Send private message

Most TV sellers will sell aerials. I got mine from JB HiFi - It came with the Hockey stick (pole to attach to side of house/barge-board), some cable and the antenna. Easy to assemble and put up.

 

Mine has a f-plug on it, so I put an f-connector on the cable I already had and screwed it into the aerial.

 

It is possible your existing Sky dish has an F-connector screwing the cable into the LNB - if you can unscrew that, and get a new aerial with a f-plug on it, then you shouldn't need to re-crimp any connectors onto your cable.


656 posts

Ultimate Geek
+1 received by user: 53

Trusted

  Reply # 1911296 30-Nov-2017 19:10
Send private message

I’m well aware of the attenuation levels of coaxial cables.
The reason for my question was stating that it is higher spec than needed a layman may think there is an alternative cable that can be used, which is not the case.

1981 posts

Uber Geek
+1 received by user: 319

Lifetime subscriber

  Reply # 1911337 30-Nov-2017 21:04
Send private message

My house is cabled with RG-59. I asked the installer if it was RG-6 (I had requested this), he said yes. I found out it wasn't when I went to terminate at wall plates with F types (I think the cable had originally been soldered to terminals on plate).

 

EDIT: RG-59 is fine in my case. 16 km from Sugarloaf, split 2 way then 2 way again and 4 way on other leg





Ross

 

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

 


Speed Test


977 posts

Ultimate Geek
+1 received by user: 91


  Reply # 1911367 30-Nov-2017 23:22
Send private message

dafman:

 

farcus:

 

I've just done this myself. Cut the RG6 cable from the sky dish . . . added the appropriate connector and hooked up to my aerial. All is working well so ripped the sky dish from the roof and discarded. 

 

 

Thanks - where did you purchase the UHF aerial and connector from? Is it straightforward for someone with basic skills (me)?

 

 

 

 

I just got a UHF antenna off trademe.
Had to cut the F connector off of the sky dish to pull the cable out.

 

As I don't have a crimping tool I just purchased a screw on F connector from Mitre 10. As it is weather protected on the antenna the screw on type should be fine.


Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Hawaiki Transpacific cable ready-for-service
Posted 20-Jul-2018 11:29


Microsoft Dynamics 365 Business Central launches
Posted 10-Jul-2018 10:40


Spark completes first milestone in voice platform upgrade
Posted 10-Jul-2018 09:36


Microsoft ices heated developers
Posted 6-Jul-2018 20:16


PB Technologies charged for its extended warranties and warned for bait advertising
Posted 3-Jul-2018 15:45


Almost 20,000 people claim credits from Spark
Posted 29-Jun-2018 10:40


Cove sells NZ's first insurance policy via chatbot
Posted 25-Jun-2018 10:04


N4L helping TAKA Trust bridge the digital divide for Lower Hutt students
Posted 18-Jun-2018 13:08


Winners Announced for 2018 CIO Awards
Posted 18-Jun-2018 13:03


Logitech Rally sets new standard for USB-connected video conference cameras
Posted 18-Jun-2018 09:27


Russell Stanners steps down as Vodafone NZ CEO
Posted 12-Jun-2018 09:13


Intergen recognised as 2018 Microsoft Country Partner of the Year for New Zealand
Posted 12-Jun-2018 08:00


Finalists Announced For Microsoft NZ Partner Awards
Posted 6-Jun-2018 15:12


Vocus Group and Vodafone announce joint venture to accelerate fibre innovation
Posted 5-Jun-2018 10:52


Kogan.com to launch Kogan Mobile in New Zealand
Posted 4-Jun-2018 14:34



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.