Geekzone: technology news, blogs, forums
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.

374 posts

Ultimate Geek
+1 received by user: 43


Topic # 56531 15-Jan-2010 13:49
Send private message

If someone could offer me advice, it would be much appreciated.

I recently bought a second freeview LCD TV.
My main TV is in the lounge connect to Telstra Saturn via s-video and via RF cable for freeview aerial.

When I renovated my house, I only put a RF cable through to the family room where the second set is located. This was ok - as I previously connected my old non-freeview second TV to my main TV via the RF out on the Saturn box which allowed me to view Telstra or the analogue FTA channels.

However with the new second freeview LCD TV, I split the freeview aerial cable with one output to my main TV and the other to my second TV.  I then combined in the Saturn RF out. see diagram.

The result is I can tune my new TV into the half the freeview channels and my saturn box.
However I assume that the saturn and freeview signals are close, so the saturn signal is overriding the freeview signals for TV1, TV2, TV3.

While I was thinking to overcome this issue I'd disconnect the Saturn RF out and run a separate composite cable from the saturn box to my second TV, I was wondering if there is a smarter way?


Create new topic
26236 posts

Uber Geek
+1 received by user: 5817

Biddle Corp
Lifetime subscriber

  Reply # 290335 15-Jan-2010 14:39
Send private message

What did you use as a combiner?

2944 posts

Uber Geek
+1 received by user: 684

  Reply # 290355 15-Jan-2010 15:53
Send private message


While I was thinking to overcome this issue I'd disconnect the Saturn RF out and run a separate composite cable from the saturn box to my second TV, I was wondering if there is a smarter way?


Not sure it is smarter, but a possible solution is to dump the composite feed from the Saturn Box into a tuner that has selectable channel output ( an old VCR deck would likely work), and set the channel to one that does not interfer with Freeview on the second set, ( just leave your current combiner intact) 


Try Wrike: fast, easy, and efficient project collaboration software

374 posts

Ultimate Geek
+1 received by user: 43


  Reply # 290357 15-Jan-2010 16:09
Send private message


I used a Hills RF splitter in reverse.

20911 posts

Uber Geek
+1 received by user: 4110


  Reply # 290594 16-Jan-2010 19:38
Send private message

yeah, you will be re-radiatiing all the saturn channels from the antenna which will make some people very unhappy. While in theory the matching og the splitters should mean that doesnt happen, in reality the signal bounces all up and down the cable and there will be some saturn signal at the antenna.

Get a seperate modulator that is tunable. There are heaps on trademe usually, or jaycar etc. Dont bother with the small VHF modulator from jaycar, it puts crap all over the band as well, seems to be the same as the old modulators used on commodore 64's etc in the 80s.

Combine that with the antenna signal using its passthru to ensure no back feed to the antenna, but it doesnt really matter if its just a single channel of analog modulation so if you get one without a pass thru just use what you have there.


374 posts

Ultimate Geek
+1 received by user: 43


  Reply # 290823 18-Jan-2010 10:19
Send private message

Many thanks.
There's one of trademe that looks like it will do the job .

"CVS-5 Agile Modulator allows you to take a video and stereo audio signal and convert it to a UHF TV Channel so you can view it on a standard TV Set or distribute it throughout an RF Distribution system. The built-in signal Splitter/Combiner allows external RF signals to be mixed with the modulated signal from the CVS-5. The CVS-5C version is for CATV UHF Channels out."

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:

Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:

Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:

News »

Opera launches new mobile browser: Opera Touch
Posted 25-Apr-2018 20:45

TCF and Telcos Toughen Up on Scam Callers
Posted 23-Apr-2018 09:39

Amazon launches the International Shopping Experience in the Amazon Shopping App
Posted 19-Apr-2018 08:38

Spark New Zealand and TVNZ to bring coverage of Rugby World Cup 2019
Posted 16-Apr-2018 06:55

How Google can seize Microsoft Office crown
Posted 14-Apr-2018 11:08

How back office transformation drives IRD efficiency
Posted 12-Apr-2018 21:15

iPod laws in a smartphone world: will we ever get copyright right?
Posted 12-Apr-2018 21:13

Lightbox service using big data and analytics to learn more about customers
Posted 9-Apr-2018 12:11

111 mobile caller location extended to iOS
Posted 6-Apr-2018 13:50

Huawei announces the HUAWEI P20 series
Posted 29-Mar-2018 11:41

Symantec Internet Security Threat Report shows increased endpoint technology risks
Posted 26-Mar-2018 18:29

Spark switches on long-range IoT network across New Zealand
Posted 26-Mar-2018 18:22

Stuff Pix enters streaming video market
Posted 21-Mar-2018 09:18

Windows no longer Microsoft’s main focus
Posted 13-Mar-2018 07:47

Why phone makers are obsessed with cameras
Posted 11-Mar-2018 12:25

Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.