Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




28 posts

Geek


Topic # 79643 20-Mar-2011 15:35
Send private message

Hi,

I bought my Zinwell ZMT-640PVR about 6 months ago. At the time, annoyed with the many bugs it had out of the box, I contacted Next Electronics to enquire about a firmware update - and was told they would do it for free during the warranty period.

Unfortunately it looks like I've missed the Next Electronics boat as they've gone into receivership :(.

So my question - is there *anyone* else in NZ that will do the firmware updates on these devices?? I'd be quite happy to do it myself but I've not been able to find the NZ firmware anywhere (although there are many forum posts of people requesting it!). I'm not holding my breath for the OTA (Over The Air) updates as according to the schedule these last happened in 2009.

I've only really put up with the problems with this device with the knowledge that I'd eventually get them fixed by a firmware update. If I can't get them fixed, will be seriously considering chucking it and buying something else!!

Thanks
Michael

View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
210 posts

Master Geek
+1 received by user: 1


  Reply # 450059 20-Mar-2011 16:04
Send private message

It might be that because of Next Electronics demise that Zinwell will release the firmware onto the internet.

3155 posts

Uber Geek
+1 received by user: 370


  Reply # 450209 20-Mar-2011 23:03
Send private message

I wouldn't hold your breath...
JC Matthews boxes weren't getting updates - and they're next to identical.
Apparently to get the update, the JC Matthew importer would have to send them back to the factory in Taiwan!

 
 
 
 


2 posts

Wannabe Geek


  Reply # 450273 21-Mar-2011 09:20
Send private message

Send me a message with your email address and I can send you a copy of firmware 1.2.2.

2198 posts

Uber Geek
+1 received by user: 839


  Reply # 450526 21-Mar-2011 21:58
Send private message

Next Electronics were (presumably) only the contracted support agent, not the vendor.

If so, and you only got it six months ago, you could try the retailer. If there is a new service agent then they should know about it and be able to arrange the update for you. If they can't then, given that it is only six months old, buggy, with the fix updates unavailable, I would try returning it under the Consumer Guarantees Act. The onus is on them to then (i) fix it, (ii) replace it with an updated/working model, or refund you.




28 posts

Geek


  Reply # 450592 22-Mar-2011 07:40
Send private message

Got a copy of the firmware from munckz (thanks!) and successfully applied it last night.

Was going to wait to see if I could get an 'official' version through the correct channels.. but as those channels no longer seem to exist and the version from munckz looked good, took the plunge.

Am now happy - firmware is up to date and the issues that I've managed to test appeared to have been resolved.

If anyone else needs a copy of the firmware, feel free to message me.

6430 posts

Uber Geek
+1 received by user: 488

Trusted

  Reply # 450639 22-Mar-2011 10:07
Send private message

Hey well done.

Could you outline what was involved please?

ie what was the updater software like, how did you apply the update, did you connect via serial/ethernet/usb etc and then obviously what improvements have you noticed etc.

Were there some release notes for this update?

2315 posts

Uber Geek
+1 received by user: 362

Trusted

  Reply # 450648 22-Mar-2011 10:45
Send private message

You place the file on a USB Stick.
Select Menu.. System.. Information and then press red
Choose the file
wait... done..
a Factory Reset may be needed after this (recordings will not be deleted)


I have emailed zinwell regarding this but I have emailed them 20 times in the past about other things and they never replied once but I'll post the file if no one minds ?

If they complain about copyright then I'll go straight back at them for their copyright infringements regarding GPL :-) (See http://www.geekzone.co.nz/LennonNZ/5305)

Thanks
Craig








28 posts

Geek


  Reply # 450673 22-Mar-2011 11:36
Send private message

Update happened as Craig outlined. There was a nervous bit where the progress bar had disappeared and nothing else was happening but the unit was not responding to the remote. After waiting about 20 mins to see if it would do anything else, located the manual and found the instruction: 'Remove the power cord from the set-top box, and insert it again to reboot the receiver'. Crossed my fingers, did as instructed and the box rebooted ok.

Would have been nice to be presented with an 'update complete, power off box to finish' or something at the end but oh well.

There were no release notes I could find with this.

I've tested the following bugs are fixed:
- Timer recordings using the active tuner (ie changing the channel you're currently watching). No longer does this.
- When recording TV3, TV3+1 no longer records as well

Hopefully I won't lose scheduled series recordings any more, will be some time before I can verify that. Apparently there was an audio bug fixed as well but I didn't have any audio issues (I was aware of) before.

Craig - I certainly don't mind if you post the file. Wasn't keen to do it myself due to copyright issues but if you're up for it - go for it :). Will help out others in the same boat!

2315 posts

Uber Geek
+1 received by user: 362

Trusted

  Reply # 450917 22-Mar-2011 21:01
Send private message

A quick and simple page @ http://www.nzdsl.co.nz/zinwell/

bmt

247 posts

Master Geek
+1 received by user: 25


  Reply # 547332 19-Nov-2011 23:22
Send private message

I know it has been a long time since the last post here, but hopefully someone can help. Is it possible to put the latest version of the firmware linked to above (1.22) onto a larger hard drive and then swap it with the 250GB already in the recorder? Unfortunately just plugging the hard drive in does not work..

260 posts

Ultimate Geek
+1 received by user: 2


  Reply # 547411 20-Nov-2011 12:21
Send private message

It seems the size of HDD you can use may be quite limited in this PVR. (maybe just 320GB)

Read ronsted's messages in http://www.geekzone.co.nz/forums.asp?forumid=83&topicid=89186

He describes how to do it.

bmt

247 posts

Master Geek
+1 received by user: 25


  Reply # 547423 20-Nov-2011 13:11
Send private message

Thanks for that. 320GB isn't much of an upgrade over 250GB. Unfortunately it seems I'm now lumped with a 1TB drive I don't need..

Minimalist
5354 posts

Uber Geek
+1 received by user: 341

Moderator
Trusted
Subscriber

  Reply # 547445 20-Nov-2011 14:17
Send private message

Have there been any further firmware updates?

260 posts

Ultimate Geek
+1 received by user: 2


  Reply # 547637 20-Nov-2011 23:24
Send private message

!.2.2 is the last ever for NZ

260 posts

Ultimate Geek
+1 received by user: 2


  Reply # 547639 20-Nov-2011 23:47
Send private message

bmt: Thanks for that. 320GB isn't much of an upgrade over 250GB. Unfortunately it seems I'm now lumped with a 1TB drive I don't need..


If you're feeling adventurous and have a Linux PC system available ( I d/l'd an iso for a bootable CD and used that on my Windows PC.

You could then try creating a 320GB partition on your 1TB drive, with the rest of it left unallocated.

Then try this drive in your Zinwell and see if it's Format command will make a usable drive for you.

If it does you could then put the drive back in your PC and, under Linux once again, create an extra 320GB partition (maybe try formatting it too). Put the drive back into the Zinwell and see if it happens to "see" it.

Who knows? - you might get lucky and end up with double or more the storage.

 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Endace announces EndaceFabric for network-wide packet recording
Posted 20-Jul-2017 20:49


Acorn 6: MacOS image editing for the rest of us
Posted 20-Jul-2017 17:04


HTC faces backlash over keyboard pop-up ads
Posted 19-Jul-2017 15:53


BNZ adds Visa credit cards to Android Pay wallet
Posted 18-Jul-2017 19:44


Still living in a Notification hell – Om Malik
Posted 18-Jul-2017 13:00


Duet Display uses iPad to extend Mac, PC
Posted 18-Jul-2017 10:58


PC sales could be worse
Posted 17-Jul-2017 07:34


Crypto-currencies, tulips, market bubbles
Posted 17-Jul-2017 06:38


NZ Tech Podcast: Big batteries, solar cars, cold war, IoT
Posted 16-Jul-2017 16:53


Vodafone Australia mulls Wisp alliance, NZ implications
Posted 13-Jul-2017 16:49


Rural health professionals see fibre pay-off
Posted 13-Jul-2017 11:52


Vodafone announces expansion of $5 Daily Roaming
Posted 13-Jul-2017 10:20


Intel unveils powerful Intel Xeon Scalable processors
Posted 12-Jul-2017 20:41


Cloud storage plans compared
Posted 12-Jul-2017 19:00


Enable Networks connects 50,000 to fibre
Posted 12-Jul-2017 11:29



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.