Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 
GamerOC

439 posts

Ultimate Geek


  #461366 21-Apr-2011 16:06
Send private message

I got LNB OS 525
  Input  12.25-12.75
 Output    950-1450
Noise  0.6dB

My dish is a oval shape I thinnk is size 60 and i purchased new on trademe and it came with another LNB with dual heads but pain in the butt to setup. that is why im using this single head LNB now.

but in the software instructions for the LNB setup this are the  instructions:
LNB Power : The configuration to let you supply power to LNB or not.
•  LNB Type : There are three types of LNB listed below.
Normal (LNB Freq.1=5150MHz, LNB Freq.2=5750 MHz)
Universal (LNB Freq.1=10600 MHz, LNB Freq.2=9750 MHz) and custom.

But cant figure out why
there is an animated Bars to show
on the left Signal Quality and on the right Signal strength and I keep hitting the 80% signal strength but I cant get the signal quality to work and when i ran the auto scan does not find any channels. Im gonna make a whole in the wall with my head ahaha,


thanks


Andy 

 

 


Jaxson
7109 posts

Uber Geek

Trusted

  #461371 21-Apr-2011 16:18
Send private message

Your LNB settings do not sound right to me.

Basic stuff is you want the lnb power on, and you want 22kHz tone set to off.

What settings have you put into the program.

And what is written on your lnb?

Did you manage to get the program to store your transponder info? (frequency/polarity/symbol rate data)

 
 
 
 


Jaxson
7109 posts

Uber Geek

Trusted

  #461379 21-Apr-2011 16:32
Send private message

This might be of some help too: http://www.geekzone.co.nz/Regs/3769

mm1352000
1149 posts

Uber Geek

Trusted

  #461402 21-Apr-2011 17:31
Send private message

If you're using MediaPortal then I would advise you not to look at Regs tutorial - it is very out of date now (it was written for 0.2.3 and we are about to release 1.2.0b), so it will probably just confuse you. Briefly, you will most likely need to use the LNB frequency overrides in the advanced tuning options section. Tick the advanced tuning options checkbox on the satellite scanning screen, enable the LNB frequency overrides by checking the override checkbox, then try the following options:

10750 (freq 1)
10750 (freq 2)
12750 (switch)

and

11300 (freq 1)
11300 (freq 2)
12750 (switch)

There is some general information about scanning available on our wiki here...

Regs
Cloud Guru
4062 posts

Uber Geek

Trusted
Snowflake
Subscriber

  #461419 21-Apr-2011 18:37
Send private message

mm1352000: If you're using MediaPortal then I would advise you not to look at Regs tutorial - it is very out of date now (it was written for 0.2.3 and we are about to release 1.2.0b), so it will probably just confuse you.
<snip>
There is some general information about scanning available on our wiki here...



i've edited the blog post and linked this wiki in at the top :)  




1 | 2 
View this topic in a long page with up to 500 replies per page Create new topic




News »

Amazon introduces new Echo devices
Posted 25-Sep-2020 11:56


Mad Catz introduces new S.T.R.I.K.E. 13 Mechanical Gaming Keyboard
Posted 25-Sep-2020 11:34


Vodafone NZ upgrades international submarine network
Posted 25-Sep-2020 09:09


Jabra announces wireless noise-cancelling airbuds, upgrade existing model
Posted 24-Sep-2020 14:43


Nokia 3.4 to be available in New Zealand
Posted 24-Sep-2020 14:34


HP announces new HP ENVY laptops aimed at content creators
Posted 24-Sep-2020 14:02


Logitech introduce MX Anywhere 3
Posted 21-Sep-2020 21:17


Countdown unveils contactless shopping with new Scan&Go tech
Posted 21-Sep-2020 09:48


HP unveils new innovations for businesses adapting to rapidly evolving workstyles and workforces
Posted 17-Sep-2020 15:36


GoPro launches new HERO9 Black camera
Posted 17-Sep-2020 09:45


Telecommunications industry launches new 5G Facts website
Posted 17-Sep-2020 07:56


New Zealand ranks 3rd in world in GSMA index
Posted 15-Sep-2020 10:13


Trend Micro Security Suite adds web monitoring to prevent identity theft
Posted 14-Sep-2020 15:37


NVIDIA to acquire Arm for US$ 40 billion
Posted 14-Sep-2020 12:27


Epson launches its next gen A3+ colour EcoTank multi-function printer
Posted 10-Sep-2020 16:08



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.