Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




691 posts

Ultimate Geek
+1 received by user: 30


Topic # 83147 11-May-2011 15:35
Send private message

Hi,
Just got mine yesterday. My first recording (to mem stick) was pefect on playback, but I couldn't view this on the PC. The folder shows three files .tx, .idx, .rap.

I knew it created a .ts file and checked these would play OK on the PC and into a 'DishTV' unit. But my tests didn't have the  extra .idx or .rap files.

In time I hope to find a PC player, but has anyone else resolved this - or can you select a different file type for the 900HD to use? The Manual doesnt say you can, but maybe...

Also, what is the address of the Ultraplus website please ?  And can I get the SCART pinouts - or confirm they're the normal spec?

Thanks for any help,




Cheers - Kirk

Create new topic
727 posts

Ultimate Geek
+1 received by user: 7


  Reply # 467974 11-May-2011 16:35
Send private message

I'm assuming you meant .ts, not ,tx. I've no idea what a .tx file would be.

Ignore the .idx and .rap files. Best guess, lacking any documentation anywhere, is that they contain the EPG data and information perhaps, about the current playback position. They are only useful to the player and not to any other software.

Many software products will play .ts files. Try VLC as a starting point. If you want a "media player", most should handle them too, and I know the WD products do, although they have other drawbacks.

There is no Ultraplus website. Ultraplus is not a manufacturer, it is a brand. Ultraplus units are made by various suppliers (Fortis is one; others seem to be "secret") and rebadged.
The nearest thing is www.ultrapower.co.nz. Turn off your sound and put on your sunglasses before visiting.



691 posts

Ultimate Geek
+1 received by user: 30


  Reply # 467994 11-May-2011 17:18
Send private message

Thanks for the info.

My apologies - I meant .ts

I am using VLC. It plays .ts files but not those created by the 900HD.




Cheers - Kirk

 
 
 
 


727 posts

Ultimate Geek
+1 received by user: 7


  Reply # 468013 11-May-2011 18:19
Send private message

ADKM: Thanks for the info.

My apologies - I meant .ts

I am using VLC. It plays .ts files but not those created by the 900HD.


Why am I not surprised.

Let me think back...

I have a vague, vague recollection of something similar.  It's possible that I had to 'wash' the ts files I got from my 980HD through MPEG Streamclip before they would play in VLC.  That dark chapter was some time ago, so I could be mistaken, but it could be worth a try.  Here's a link for MPEG Streamclip.
http://www.squared5.com/ 



691 posts

Ultimate Geek
+1 received by user: 30


Reply # 468040 11-May-2011 20:14
Send private message

Isn't it disappointing the manufacturer would make what's apparently an up-market model but have it output such an incompatible file type?
Thank you very much for the link and suggestion, unfortunately the ReadMe said it needed a couple of programs I'd rather not install. Plus I just found an alternative - 'VideoReDoTVSuite'. This coverts the 900HD .ts to an mpg (and quite quickly). It plays in everything and seems to retain quality and sync.

Thanks again for the replies and help.
Cheers - Kirk




Cheers - Kirk

727 posts

Ultimate Geek
+1 received by user: 7


  Reply # 468051 11-May-2011 20:43
Send private message

Something more than a codec pack? Still - not to worry. I've heard good things about VideoReDo (but haven't tried it myself).

ts really is mpeg by a different name with a few tweaks, so there is no real conversion taking place - it's basically a copy. You could try just changing the file extension/type - it could work.

One point though. .ts files ARE a fairly common and well-defined file type, so that the Ultraplus uses it is not unreasonable. Essentially, it is just a dump of what is being broadcast. Quite what the Ultraplus does to it to make it incompatible, I don't know.

(In contrast, files from my Vu+ Duo, also .ts files, can be played by VLC without difficulty.)

Caveat - I'm no expert, so any of this could be wrong.

1574 posts

Uber Geek
+1 received by user: 11


  Reply # 468060 11-May-2011 21:12
Send private message

Give TSDoctor a try.
It has a 30-day free trial, but IMO it is worth the 29 Euro.

It seems to handle most mpeg file formats one throws at it.
It will essentially "clean" an mpeg stream, and then remux it into a clean .ts file.
The resulting .ts file should then play smoothly in VLC, and MPC-HC.



691 posts

Ultimate Geek
+1 received by user: 30


  Reply # 468080 11-May-2011 21:54
Send private message

The squared5 file wanted QuickTime and Realplayer.

Where would be a good Forum for general discussion on this unit?  Here?  I expected a learning curve but tonight was really odd.  I'd somehow made one channel require a pin. From 'Service List manager'  I got into even more trouble, with some 'services' being locked (and no apparent unlock) and various blue icons appearing beside the names. Attemping to remove them only made things worse. Book no help. Then all the names went out of sequence. Somehow my wife managed to fix it and get rid of the blue things, but she doesn't know what she did!

The worst part though, and we were recording it's output into a DVDR, and it decided at 2044 to switch to Ch 19 and and display a prompt  about which USB port to use. So that was recorded instead of the programme.
There were a couple of thing in Timer settings from yesterday, (seemed like a events log). They didn't correspond to 2044 but until I removed them it would keep repeating the prompt.

Does the timer automatically start recording? If so, can it be made to just switch channels ?

The .ts file - I tried on a PC, a Hyundai Media player, and a 'DishTV' Sat receiver. None would play it although other .ts files have worked in all of them. (The PC could read the folder though)
VLC reports 'Unrecognized format', but for the .idx file.  Remove the idx file and it the slider moves quickly to the end and no video screen appears. Renaming it to .avi does the same.

dontpanic42, thanks for tip about TSDoctor.




Cheers - Kirk

1574 posts

Uber Geek
+1 received by user: 11


  Reply # 468086 11-May-2011 22:06
Send private message

ADKM:Renaming it to .avi does the same.


You could also try renaming the raw .ts file extension from the 900HD to .m2ts. That sometimes makes the file more playable. Sometimes... ;)

But yeah, I would give TSDoctor a whirl.



691 posts

Ultimate Geek
+1 received by user: 30


  Reply # 468092 11-May-2011 22:18
Send private message

No joy either as m2ts. Same thing.  I just tried loading it into TMPGEnc and got this !






Cheers - Kirk

727 posts

Ultimate Geek
+1 received by user: 7


  Reply # 468095 11-May-2011 22:21
Send private message

ADKM: The squared5 file wanted QuickTime and Realplayer.


Ok - I consider those fairly innocuous, but of course I respect your decision not to install them.
Where would be a good Forum for general discussion on this unit? Here?

About as good a place as any. There may be some discussion over at austech (http://www.austech.info/decoders/), but there is never going to be a big user base.



I expected a learning curve but tonight was really odd. I'd somehow made one channel require a pin. From 'Service List manager' I got into even more trouble, with some 'services' being locked (and no apparent unlock) and various blue icons appearing beside the names. Attemping to remove them only made things worse. Book no help. Then all the names went out of sequence. Somehow my wife managed to fix it and get rid of the blue things, but she doesn't know what she did!

The worst part though, and we were recording it's output into a DVDR, and it decided at 2044 to switch to Ch 19 and and display a prompt about which USB port to use. So that was recorded instead of the programme.
There were a couple of thing in Timer settings from yesterday, (seemed like a events log). They didn't correspond to 2044 but until I removed them it would keep repeating the prompt.

Welcome to the world of Ultraplus.

Does the timer automatically start recording? If so, can it be made to just switch channels ?

Gee, I'd hope so, but who knows?

The .ts file - I tried on a PC, a Hyundai Media player, and a 'DishTV' Sat receiver. None would play it although other .ts files have worked in all of them. (The PC could read the folder though)
VLC reports 'Unrecognized format', but for the .idx file. Remove the idx file and it the slider moves quickly to the end and no video screen appears. Renaming it to .avi does the same.

Looks like "washing" the files may be your best option if you want to play them on any other device.

93 posts

Master Geek


  Reply # 468330 12-May-2011 14:50
Send private message

JetAudio plays the .ts files created by my UltraPlus 700HDMI, without any washing or renaming of the file.

2243 posts

Uber Geek
+1 received by user: 893


  Reply # 468442 12-May-2011 19:12
Send private message

I had the same type of issue with .ts files created by a Visione VE4000 Freeview box. Nothing, including VLC, would play the files.

After trying a number of options I found that washing the files through H.264 TS_Cutter, using the Tools "Convert TRP/REC -->TS" option, would produce a file where the video was playable in VLC. The problem was that the recording was silent, and I could never get the audio (which was HE-AAC v2 on TVNZ) to play.

After trying everything I could think of, without luck, I gave up.



691 posts

Ultimate Geek
+1 received by user: 30


  Reply # 468464 12-May-2011 20:00
Send private message

Confirm!  JetAudio Basic 8.0.14 will play the 900HD .ts files :-)




Cheers - Kirk

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Symantec protects data everywhere with Information Centric Security
Posted 21-Sep-2017 15:33


FUJIFILM introduces X-E3 mirrorless camera with wireless connectivity
Posted 18-Sep-2017 13:53


Vodafone announces new plans with bigger data bundles
Posted 15-Sep-2017 10:51


Skinny launches phone with support for te reo Maori
Posted 14-Sep-2017 08:39


If Vodafone dropping mail worries you, you’re doing online wrong
Posted 11-Sep-2017 13:54


Vodafone New Zealand deploy live 400 gigabit system
Posted 11-Sep-2017 11:07


OPPO camera phones now available at PB Tech
Posted 11-Sep-2017 09:56


Norton Wi-Fi Privacy — Easy, flawed VPN
Posted 11-Sep-2017 09:48


Lenovo reveals new ThinkPad A Series
Posted 8-Sep-2017 14:37


Huawei passes Apple for the first time to capture the second spot globally
Posted 8-Sep-2017 10:45


Vodafone initiative enhances te reo Maori pronunciation on Google Maps
Posted 8-Sep-2017 10:40


Voyager Internet expand local internet phone services company with Conversant acquisition
Posted 6-Sep-2017 18:27


NOW Expands in to Tauranga
Posted 5-Sep-2017 18:16


Windows 10 Fall Creators Update coming Oct. 17
Posted 4-Sep-2017 14:10


Garmin introduce Garmin vivoactive 3
Posted 1-Sep-2017 18:38



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.