Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3
15 posts

Geek


  Reply # 516924 5-Sep-2011 15:44
Send private message

some more annoyances...

1/ the rf loopout doesn't work unless the t1020 is on. so i can't watch (analog) prime etc on the tv alone. i have to turn on the t1020 as well. [yes it'll be a redundant issue when the analog signals are switched off but it's an annoynance at the moment]

2/ if the t1020 unit is turned off (ie in sleep mode) and a scheduled recording begins,
the t1020 is unresponsive (ie you can't turn on the unit to watch anything,) until the recording finishes

3/ further more, following issue 2. the t1020 unit doesn't turn itself, or the hdd, off, after recording from sleep mode.

4/ you can't add a bookmark during normal viewing of a recorded program. you have to enter the edit mode.



2385 posts

Uber Geek
+1 received by user: 286
Inactive user


  Reply # 516931 5-Sep-2011 15:54
Send private message

WOW, have not noticed those.

Best to log a service request with them, send an email to support@dishtv.co.nz and keep us updated!!!


 
 
 
 


2589 posts

Uber Geek
+1 received by user: 1238


  Reply # 517040 5-Sep-2011 18:15
Send private message

Release an "unapproved firmware", so that those of us who want to can upgrade the box to lose the EPG (which I understand a box has to be Freeview approved to use), in return for getting rid of the annoyance of not being able to transfer HD material. This is a requirement related to Freeview approval and EPG use, not a legal requirement.

54 posts

Master Geek
+1 received by user: 1


  Reply # 517104 5-Sep-2011 20:05
Send private message

Where are the radio channels , it finds them during a scan ?
Another wish list is for me to create different folders , so you can put your recordings in different folders ,
now its just one long list !
My Topfield satellite receiver can do that
























590 posts

Ultimate Geek
+1 received by user: 76

Trusted
Lifetime subscriber

  Reply # 517142 5-Sep-2011 21:11
Send private message



3)    If a recorded show is viewed only halfway, then stopped, its necessary to start all the way from the beginning again or use fast forward.



There is  a work around.  Before I stop the playback, I first pressed the "info" buttion to note where I am at (e.g. 5mins into a 30min programme).

Then I stopped the programme.  Then go to thumbnail browser.

Then I go to list mode using one of the colour buttions.

Then I move my cursor / selection bar to the programme I just watched.  Press the grenn buton ("EDIT") and select edit book mark.

The the programme will playback in a small box and there is a text box you can enter the time.

Then I will press the down button once to get to the text box, and enter 00:05:00.

The playback will jump to that point (but you are still in the same screen), press the Green button to add a bookmark.

Once this is done.  Click the back button.

When you are ready to watch the programme again.  Playback as normal, then press the "right" button and it will jump to the first bookmark.

You can add up to 8 bookmarks.

Cheers!

590 posts

Ultimate Geek
+1 received by user: 76

Trusted
Lifetime subscriber

  Reply # 517145 5-Sep-2011 21:17
Send private message

diamonddata: some more annoyances...

1/ the rf loopout doesn't work unless the t1020 is on. so i can't watch (analog) prime etc on the tv alone. i have to turn on the t1020 as well. [yes it'll be a redundant issue when the analog signals are switched off but it's an annoynance at the moment]

2/ if the t1020 unit is turned off (ie in sleep mode) and a scheduled recording begins,
the t1020 is unresponsive (ie you can't turn on the unit to watch anything,) until the recording finishes

3/ further more, following issue 2. the t1020 unit doesn't turn itself, or the hdd, off, after recording from sleep mode.

4/ you can't add a bookmark during normal viewing of a recorded program. you have to enter the edit mode.


For (2), I don't have that problem.  Say my unit was originally in sleep mode, and a shceduled recording begins, I can press the power button on the remote and the box will turn on.  To be more precise, if the box was doing some recording after it "wake up" from sleep mode, there is no signal sent via the HDMI cable.  But if I press the power button on the remote, the signal will be on again.

I do experience (3) sometime.

Which version of firmware are you on.

15 posts

Geek


  Reply # 517419 6-Sep-2011 12:00
Send private message

AKLWestie:


For (2), I don't have that problem. Say my unit was originally in sleep mode, and a shceduled recording begins, I can press the power button on the remote and the box will turn on. To be more precise, if the box was doing some recording after it "wake up" from sleep mode, there is no signal sent via the HDMI cable. But if I press the power button on the remote, the signal will be on again.

I do experience (3) sometime.

Which version of firmware are you on.



when the t1020 unit is self recording from sleep mode, pressing the power button (or any other button, for that matter) does nothing for me . the unit is completely unresponsive until the recording finishes and then the power button works. i then have to press once, to turn the unit off (as there is no picture) and again to turn it on, get picture.

i'm using a3ust13_17_01oe
dated 22 may 2011

15 posts

Geek


  Reply # 517477 6-Sep-2011 13:15
Send private message

another annoyance is...

the timer sometimes loops upon itself, eg recorded final destination 2 on tv2 the other week. lets say its 120 minutes long (i can't remember off hand). i
watch about 10 minutes of it and the timer says its 40 minutes in;
i watch about 30 minutes of it and the timer now says its (the end of the movie at) 120 minutes in;
i watch about 40 minutes of it and the timer says its 40 minutes in again;
i watch about 60 minutes of it and the timer says its 20 minutes in again. etc
when it's like this, the edit/bookmark function & the skip button are unless
. try skipping to, say, 61 minutes in on the timer and you jump to near the start of the film..

this problem may not be unique to the t1020 as i've experienced this on another brand

62 posts

Master Geek
Inactive user


  Reply # 517869 7-Sep-2011 01:53
Send private message

diamonddata: some more annoyances...

2/ if the t1020 unit is turned off (ie in sleep mode) and a scheduled recording begins,
the t1020 is unresponsive (ie you can't turn on the unit to watch anything,) until the recording finishes

3/ further more, following issue 2. the t1020 unit doesn't turn itself, or the hdd, off, after recording from sleep mode.


+1

I`m using version 1.1a.

Also my unit will randomly switch on /load/boot/init/P001 during the course of the day.
sometimes it switches off again sometimes it doesn`t...

But on the plus side it does record properly now.

734 posts

Ultimate Geek
+1 received by user: 130


  Reply # 517893 7-Sep-2011 07:42
Send private message

BraaiGuy: Some feedback from DishTV:
They Replied:
Thanks for your feedback . It is exactly what we need ,   We are already implementing   1,2,3,  points .  Streaming is a work in progress but we are limited with Freeview HDCP . We cannot allow file transfer of any HD content . 
Item 5 we will look at .  



BraaiGuy: Perhaps it's worth you alerting them to this thread (and the other thread on here - although this one is more recent and relevant to current issues). 



2385 posts

Uber Geek
+1 received by user: 286
Inactive user


  Reply # 518514 8-Sep-2011 12:49
Send private message

sultanoswing:
BraaiGuy: Some feedback from DishTV:
They Replied:
Thanks for your feedback . It is exactly what we need ,   We are already implementing   1,2,3,  points .  Streaming is a work in progress but we are limited with Freeview HDCP . We cannot allow file transfer of any HD content . 
Item 5 we will look at .  



BraaiGuy: Perhaps it's worth you alerting them to this thread (and the other thread on here - although this one is more recent and relevant to current issues). 


Yip already did that a while ago when I first logged my issue with them

15 posts

Geek


  Reply # 519172 9-Sep-2011 23:34
Send private message

i installed the 1.1a driver to see if it'd fix the issues listed above.

now my t1020 won't begin recording from sleep mode at all. all scheduled programs to be recorded are not actioned when my t1020 is left in sleep mode. I'd rather not have the unit (or my hdd) on 24 hours a day.

anyone still have a copy of an older version? preferably, version a3ust13_17_01oe. dated 22 may 2011. .

I'd like to go back to the last version where i was at least still able to begin recording from sleep mode. i couldn't find any links on the dishtv site to any past drivers.

15 posts

Geek


  Reply # 519179 10-Sep-2011 00:07
Send private message

sunfolk:
+1

I`m using version 1.1a.

Also my unit will randomly switch on /load/boot/init/P001 during the course of the day.
sometimes it switches off again sometimes it doesn`t...

But on the plus side it does record properly now.



having also installed the 1.1a driver , i'm getting random rebooting of the t1020 as well.
most frustrating, esp. during recording a program. it just stops. recording isn't resumed.

15 posts

Geek


  Reply # 519195 10-Sep-2011 08:31
Send private message

performed factory reset. seems to have corrected record from sleep mode issue for the time being.

235 posts

Master Geek


  Reply # 519585 11-Sep-2011 15:43
Send private message

I have just installed this box for my grandma, have the lounge tv running nicely, I have run an extra cable from the RF out to the tv in the kitchen, but cannot get this tv to tune in the free view channel from the box. Do I need to get a modulator in-between to allow the t1020 to send the signal to the second tv?




this is a slap in the face!

1 | 2 | 3
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Geekzone Live »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.