Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


265 posts

Ultimate Geek
+1 received by user: 2


Topic # 89186 27-Aug-2011 16:49
Send private message

The HD in my ZMT-640PVR is beginning to make ugly mechanical noises so I'm keen to replace it before it goes belly up.

Has anyone successfully done this operation or do you know what formatting, partitioning and software installation/copying may be required to make this work.

Thanks for any useful advice.

Terry
 

Create new topic
929 posts

Ultimate Geek
+1 received by user: 39


  Reply # 513210 28-Aug-2011 21:56
Send private message

Not many people own that device.

If you're buying a new hard drive look for a model that is made for STBs and home theatre PCs so it won't be too loud. It should be fairly easy to figure out what partition structure is on the drive, recreate it on a new one and copy the files across.

http://unetbootin.sourceforge.net/
http://partedmagic.com/

Make sure your PC's HDD isn't plugged in while you do this so you don't wipe it by mistake.Sealed



265 posts

Ultimate Geek
+1 received by user: 2


  Reply # 513605 29-Aug-2011 18:51
Send private message



If you're buying a new hard drive look for a model that is made for STBs and home theatre PCs so it won't be too loud. It should be fairly easy to figure out what partition structure is on the drive, recreate it on a new one and copy the files across.

http://unetbootin.sourceforge.net/
http://partedmagic.com/

-------------------------------------------------------------------------------------------------------------------------

Thanks for your reply and those links.

I'm not so worried about the hardware aspects (apart from any HD size limits that may exist)

While I've had plenty of experience with DOS and Windows, I've never ventured into Linux, which I suspect this machine probably employs. I'm a bit nervous about Partitioning, formatting and copying with this OS.



108 posts

Master Geek
+1 received by user: 8


  Reply # 513618 29-Aug-2011 19:17
Send private message

Surely the Zinwell setup has a HDD format option in the setup. If you use this it should set it up properly. My JC Matthew has this option.

929 posts

Ultimate Geek
+1 received by user: 39


  Reply # 513638 29-Aug-2011 20:19
Send private message

It may, but that isn't going to transfer the existing database over to the new drive

108 posts

Master Geek
+1 received by user: 8


  Reply # 513645 29-Aug-2011 20:31
Send private message

The operating system is firmware and is separate from the HDD. The disk is only for recordings so a system reformatted HDD should work fine. If your existing HDD is knacked then you probably won't be able to retreive anything off it anyway. If it you can still retreive things off it you could use Symantic Ghost to transfer the files over using a PC then install it into your Zinwell. Just need to find out if it uses FAT32 or NTFS.



265 posts

Ultimate Geek
+1 received by user: 2


Reply # 513668 29-Aug-2011 21:19
Send private message

My only experience with drive replacement in a PVR was with my TiVo which has multiple small partitions which contain OS and System Data storage in addition to the main partition which holds the AV file storage. These have to be partitioned and copied under Linux which is commonly used on proprietary recorders.

I'm sure the user available "Format" command would only apply to the file storage partition. While booting back from standby the system accesses the HD for the operating system or required data on the HD.

My copy of Norton Ghost does not mention Linux under its list of operating platforms.   

5 posts

Wannabe Geek


  Reply # 515257 1-Sep-2011 18:43
Send private message


I have replaced/upgraded the HDD in my Zinwell ZMT-640PVR. Being a Linux based system it uses the ext3 file system. When I used a 320G drive and formated it with the 'Format HDD' option via the Zinwell menu it worked perfectly well. (note on the side - use 0000 for a password when asked). It created the file system plus the required PLAY_LIST folder. The 320G drive has been working perfectly ever since (2years).

I did also tried a 500G drive though but that failed. Format process started but froze half way through and never completed. Rebooting (a hard reboot = disconnecting the power!) was the only option. Checking the drive on another system confirmed that the ext3 file system had not been created.



265 posts

Ultimate Geek
+1 received by user: 2


  Reply # 516065 3-Sep-2011 10:02
Send private message

Thanks for that last reply. It looks as though the replacement operation may be simpler than I had feared.

My original drive is only a 250GB. Though it's adequate for my usage with this machine I had intended replacing it with a larger unit.

After hearing your experiences I guess I'll stick with the smaller size, although it may be hard to find a matching replacement these days.


5 posts

Wannabe Geek


  Reply # 516198 3-Sep-2011 17:46
Send private message

I would guess that any SATA drive up to 320GB will work. The only thing to keep an eye out for is the speed (high data transfer and fast access time) of the drive. Since it is reading/writing media files a large buffer with high RMP is vital. 3GB/s SATA, 16G+ buffer, 7200rpm drives will be fine.
While working on it, you may consider (if not already done) a firmware upgrade. Check on this site for the latest firmware - http://www.nzdsl.co.nz/zinwell/




265 posts

Ultimate Geek
+1 received by user: 2


  Reply # 516376 4-Sep-2011 11:00
Send private message

ronstev: While working on it, you may consider (if not already done) a firmware upgrade. Check on this site for the latest firmware - http://www.nzdsl.co.nz/zinwell/



Thanks, I'll do that. I'm presently running 1.2.0

I also have a ZMT 620HD STB (Dick Smith branded) which has gone faulty. It has lost tuner sensitivity to the point where received signal levels are unusable. 

The same aerial feed plugged into the ZMT640 is fine.

Does nobody service Zinwell products in NZ anymore?
 

1927 posts

Uber Geek
+1 received by user: 128


  Reply # 516407 4-Sep-2011 12:16
Send private message

PimpMyMagic:

I also have a ZMT 620HD STB (Dick Smith branded) which has gone faulty. It has lost tuner sensitivity to the point where received signal levels are unusable. 

The same aerial feed plugged into the ZMT640 is fine.

Does nobody service Zinwell products in NZ anymore?
 


Seems to be a problem with these at 2 yrs+ old. They lose sensitivity and die.
I have had mine (2 1/2 yrs old)  replaced by DSE under CGA as have others on Geekzone.
The Zinwell replacement is OK so far at 1 yr.
Servicing is probably uneconomic.

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel introduces new NUC kits and NUC mini PCs
Posted 16-Aug-2018 11:03


The Warehouse leaps into the AI future with Google
Posted 15-Aug-2018 17:56


Targus set sights on enterprise and consumer growth in New Zealand
Posted 13-Aug-2018 13:47


Huawei to distribute nova 3i in New Zealand
Posted 9-Aug-2018 16:23


Home robot Vector to be available in New Zealand stores
Posted 9-Aug-2018 14:47


Panasonic announces new 2018 OLED TV line up
Posted 7-Aug-2018 16:38


Kordia completes first live 4K TV broadcast
Posted 1-Aug-2018 13:00


Schools get safer and smarter internet with Managed Network Upgrade
Posted 30-Jul-2018 20:01


DNC wants a safer .nz in the coming year
Posted 26-Jul-2018 16:08


Auldhouse becomes an AWS Authorised Training Delivery Partner in New Zealand
Posted 26-Jul-2018 15:55


Rakuten Kobo launches Kobo Clara HD entry level reader
Posted 26-Jul-2018 15:44


Kiwi team reaches semi-finals at the Microsoft Imagine Cup
Posted 26-Jul-2018 15:38


KidsCan App to Help Kiwi Children in Need
Posted 26-Jul-2018 15:32


FUJIFILM announces new high-performance lenses
Posted 24-Jul-2018 14:57


New FUJIFILM XF10 introduces square mode for Instagram sharing
Posted 24-Jul-2018 14:44



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.