Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




360 posts

Ultimate Geek
+1 received by user: 3


Topic # 23734 8-Jul-2008 11:43
Send private message

Hi all!

I know this might look like "easier to ask than search for the answer" situation, but I could not find the answer inside MediaPortal Manual or on that forum.

I want to install new plugins, I downloaded some .zip or .rar files, they create a bunch of other files when un-zipped, it is not a proper installation process, where the files go where they are supposed to be. What do I do with them? Where should I put them in order to get that plug-in activated?

To be more specific, there is a game "Mastermind", and a plug-in allowing you to control pins on the parralel port (I want to use this and a solid state relay to turn things on/off from inside MP Home menu). After several days I still could not find a way to install the plugins... Please help me with a guide, or at least some basic instructions, where to start from...




mobo Intel DH55PJ, RAM: 4GB RAM, Nova-T 500 HD + Avermedia Trinity tuner card, Geforce 520 video, 120GB SSD Sandisk + 640 WD + 1000SG, Win7 Home Prem 64-bit, Media Portal 1.15.0; BTC 9019URF Cordless Keyboard, Panasonic 55" (HDMI cable), HTPC Case Silverstone Grandia GD05B.


Create new topic
2785 posts

Uber Geek
+1 received by user: 226


  Reply # 144573 8-Jul-2008 13:21
Send private message

As far as I know you put the plugin in its own folder under the plugins folder which is in the MediaPortal folder.
Then run the MP Config and go to the plugins page and it should be listed there.

Or you could try going to the Plugins in MP Configuration and go to the MPInstaller tab.




1770 posts

Uber Geek
+1 received by user: 115


  Reply # 144587 8-Jul-2008 13:37
Send private message

CYaBro is right. Be aware that some plugins just have the dll files or whatnot without their file structure so you might have to experiment with which plugins folder you put them into. Sometimes they go in different folders but they should have notes on the plugin download page where they are to go.

And yeah, to check that they are in the right place you have to go into the plugins page of the configuration and see if they are selectable from there.

 
 
 
 




360 posts

Ultimate Geek
+1 received by user: 3


  Reply # 144607 8-Jul-2008 13:56
Send private message

Thsnks a lot!
I did not imagine it is as easy as put them in their own directory. I will try this and let you know how it works.




mobo Intel DH55PJ, RAM: 4GB RAM, Nova-T 500 HD + Avermedia Trinity tuner card, Geforce 520 video, 120GB SSD Sandisk + 640 WD + 1000SG, Win7 Home Prem 64-bit, Media Portal 1.15.0; BTC 9019URF Cordless Keyboard, Panasonic 55" (HDMI cable), HTPC Case Silverstone Grandia GD05B.


2548 posts

Uber Geek
+1 received by user: 88


  Reply # 145481 9-Jul-2008 15:34
Send private message

Please tell me more about this parallel port plugin
How does it work, and what are you going to be able to control within mediaportal?




HTPC: Intel i3-2100 / 12GB RAM / AMD HD7750 / 480 GB SSD / 58TB Storage / MediaPortal / MadVR / Win10
AVR: Pioneer Elite SC-LX87 220W 9.2 Ch AVR
Speakers: Wharfedale Jade 7 Fronts / Jade 2c Center / Jade 5 Rears
Subs: iNuke 3000dsp 3000W proamp with 4x 15" JBL Sealed Subs
Display: Samsung 60" UA60H6400 LCD TV
Accessories: Gefen HDMI Detective with splitter


1074 posts

Uber Geek
+1 received by user: 170


  Reply # 145726 9-Jul-2008 20:58
Send private message

Hey guys, I wrote the MyPowerControl Plug-in so I can provide support if needed. I didn't know anyone actually used it! Anyhow I'm gonna update it soon with new code that allows you to use a parallel print server instead of a onaboard parallel port.
This is a much better option and you can get jet direct print servers off trademe pretty cheap. For for details see my blog

The latest version of MyPowerControl comes as an msi so it will just install it self.







360 posts

Ultimate Geek
+1 received by user: 3


  Reply # 146217 10-Jul-2008 16:54
Send private message

My understanding is that you can basically control anything from the menu options of MediaPortal. The idea is to switch pins on the parallel on and off and use this to activate relays to turn other equipment on/off. Solid state relays are recommended (not cheap), not mechanical ones ($3-$5).

I was planning to have a lamp on/off behind the tv screen, as it is well known that it is not good for your eyes to watch the tv in a completely dark room. But the relay can activate anything you want, lets say the garage door or maybe the fishtank or the front gate or a fan in the room or maybe the oil heater!. Anything which has an on/off button. You can have up to 8 relays. I got one from TradeMe for $10 (240V/25A). I also found this: http://www.opto22.com/site/pr_cat_ssc.aspx?qs=1006101610531098,1,18,,&,,,&, (3A/240V gives you enough power for most of the devices you might want to play with... not the oil heater, though). I did not give them a call yet as I need only one and I already got it. Careful with bigger ones, they will require heatsink: http://www.power-io.com/library/appnotes/heatsink-info.htm (and many other sources for sizing)

You need the control signal to be as low as possible (most of them are 3-32C DC for control signal and this I understand should be OK, but some of them require 5v or even 12V DC for control, your parallel port will not have this capability and more circuitry will be required to control the solid state relay... )

I got lots of info from here: http://www.epanorama.net/circuits/parallel_output.html. Read the solid state relay section.
The plugin is here: http://www.team-mediaportal.com/files/Download/Plugins/Utilities/MyPowerControl/ and is the one made by MCRAENZ. By the way, I downloaded it and uncompressed the archive, what do I do with all the files, where do they go? there is no exe...

Unfortunately I noticed my mobo does not have a parallel port at the back, has only a header and the ribbon cable with a bracket is not to be found (I was told parallel technology is obsolete and nobody has them anymore). I am still looking for one. Any work around? I have no PCI slots available either so a PCI/parallel card cannot be used (if you have the chance to use such card, go for it as it will protect the mobo if anything goes wrong!).

It is not really easy if you look at all the implications, but will be fun to get it done!!




mobo Intel DH55PJ, RAM: 4GB RAM, Nova-T 500 HD + Avermedia Trinity tuner card, Geforce 520 video, 120GB SSD Sandisk + 640 WD + 1000SG, Win7 Home Prem 64-bit, Media Portal 1.15.0; BTC 9019URF Cordless Keyboard, Panasonic 55" (HDMI cable), HTPC Case Silverstone Grandia GD05B.


1074 posts

Uber Geek
+1 received by user: 170


  Reply # 146239 10-Jul-2008 17:16
Send private message

aucklander:
The plugin is here: http://www.team-mediaportal.com/files/Download/Plugins/Utilities/MyPowerControl/ and is the one made by MCRAENZ. By the way, I downloaded it and uncompressed the archive, what do I do with all the files, where do they go? there is no exe...

Unfortunately I noticed my mobo does not have a parallel port at the back, has only a header and the ribbon cable with a bracket is not to be found (I was told parallel technology is obsolete and nobody has them anymore). I am still looking for one. Any work around? I have no PCI slots available either so a PCI/parallel card cannot be used (if you have the chance to use such card, go for it as it will protect the mobo if anything goes wrong!).

It is not really easy if you look at all the implications, but will be fun to get it done!!


Dude! Did you read my reply?

Also best to get support in the Plug-in thread at the Mp forums.
http://forum.team-mediaportal.com/plugins-47/my-power-control-plug-33797/index2.html

and look here:
http://www.trademe.co.nz/Computers/Networking-modems/Other/auction-164908686.htm
Just Imagine you could have 24 Devices!

Also impout32.dll won't work with most PCI parallel cards, And don't even think about a USB<->Parallel adaptor. Wow that was a waste of $16! A print server is the best way to go, also the pins don't get reset everytime you reboot the PC!






360 posts

Ultimate Geek
+1 received by user: 3


  Reply # 146568 11-Jul-2008 08:10
Send private message

I never recommended USB/parallel adaptor, I agree it will not work. The use of PCI/parallel card idea I got after reading several sites. Some recommended this as a protection for the mobo, others stated some cards might not work properly for this application. I am sure anyone would do some research before going ahead with any idea and not rely on one advice source only...

The link to the $16 item I posted is for a solid state relay (the lowest price for a brand new item I could find). The use of the parallel server from tradeMe looks to be a nice alternative indeed, provided you need so many outputs.




mobo Intel DH55PJ, RAM: 4GB RAM, Nova-T 500 HD + Avermedia Trinity tuner card, Geforce 520 video, 120GB SSD Sandisk + 640 WD + 1000SG, Win7 Home Prem 64-bit, Media Portal 1.15.0; BTC 9019URF Cordless Keyboard, Panasonic 55" (HDMI cable), HTPC Case Silverstone Grandia GD05B.


1074 posts

Uber Geek
+1 received by user: 170


  Reply # 146606 11-Jul-2008 09:48
Send private message

Yeah of you can get a single parallel port server too, think about having it networked is that can easily exten it anywhere in the house.

Anyhow if you do end up using a standard parallel port rather than a print server can I get you beta test the next version before I release it? I don't have a PC with a parallel port anymore and I don't know if I've broken any of the parallel port code when adding support for print servers! Laughing




Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Vodafone TV — television in the cloud
Posted 17-Oct-2017 19:29


Nokia 8 review: Classy midrange pure Android phone
Posted 16-Oct-2017 07:27


Why carriers might want to embrace Commerce Commission study, MVNOs
Posted 13-Oct-2017 09:42


Fitbit launches Ionic, its health and fitness smartwatch
Posted 12-Oct-2017 15:52


Xero launches machine learning automation to improve coding accuracy for small businesses
Posted 12-Oct-2017 15:45


Bank of New Zealand uses Intel AI to detect financial crime
Posted 12-Oct-2017 15:39


Sony launches Xperia XZ1, a smartphone with real-time 3D capture
Posted 11-Oct-2017 10:26


Notes on Nokia’s phone comeback
Posted 10-Oct-2017 10:06


Air New Zealand begins Inflight Wi-Fi rollout
Posted 9-Oct-2017 20:16


The latest mobile phones in perspective
Posted 9-Oct-2017 18:34


Review: Acronis True Image 2018 — serious backup
Posted 8-Oct-2017 11:22


Lenovo launches ThinkPad Anniversary Edition 25
Posted 7-Oct-2017 23:16


Less fone, more tech as Vodafone gets brand make-over
Posted 6-Oct-2017 08:16


API Talent Achieves AWS MSP Partner Status
Posted 5-Oct-2017 21:20


Stellar Consulting Group now a Domo Partner
Posted 5-Oct-2017 21:03



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.