Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




10 posts

Wannabe Geek


Topic # 24743 1-Aug-2008 11:32
Send private message

Hi folks

Just wondering if anyone has any tips on getting the SVHS input working on the HVR-2200. I just get a blue screen (but not of death!) when I try and view this channel. I have tried using a number of different cables, and using both MediaPortal and WinTV which comes with the card, but to no avail. Digital and analogue TV are both working fine, just not SVHS. I have tried three or four different sets of drivers, currently using the latest from the NewMagic site. At one stage after installing some drivers I did briefly get a working picture, but the next day it was not working again! Hardware issue? Driver conflict? This thing is driving me nuts!


Cheers


Andrew


Create new topic
1075 posts

Uber Geek
+1 received by user: 172


  Reply # 153276 1-Aug-2008 12:12
Send private message

I saw that blue screen when I was first getting the card up and running but then it just stated working! Sorry that's not much help.




183 posts

Master Geek


  Reply # 153285 1-Aug-2008 12:34
Send private message

Is that with s-video<->s-video and composite<->composite?
If you can get analogue tv ok then i wouldnt expect the encoder chip to be faulty.


 
 
 
 




10 posts

Wannabe Geek


  Reply # 153295 1-Aug-2008 13:14
Send private message

I really want to use this to connect my UHF Sky decoder (don't ask!) in to MediaPortal via composite (I have a composite <-> SVideo cable) , but I have been testing using a S-Video <->S-Video connection to a DVD player and still no joy...

What combinations of drivers / programmes are people using successfully for SVHS input?

183 posts

Master Geek


  Reply # 153308 1-Aug-2008 13:55
Send private message

I've never tried S-Video<->S-Video because i dont have that cable but composite<->composite worked fine for me. All drives worked fine to from cd or hauppauge website. If it doesnt work in wintv or media portal it most likely wont work in other pvr's since it's just analogue so nothing special to setup.
Anyway here's some prv's i've tried before: Honestech VHS to DVD, Mainconcept PVR, IUVCR, WinVDR and Media portal.
Can you hook up the dvd player to your card through composite?



10 posts

Wannabe Geek


  Reply # 153313 1-Aug-2008 14:08
Send private message

I don't have a composite input on my card! I didn't think it was an option on the 2200

183 posts

Master Geek


  Reply # 153321 1-Aug-2008 14:19
Send private message

but you should have got a s-video to composite converter. Ah wait they only sell the oem version here :(
Does your graphics card come with a  s-video to composite converter?



10 posts

Wannabe Geek


  Reply # 153334 1-Aug-2008 14:48
Send private message

Yes, and have used it to try connecting the Sky decoder to the PC without success (well it did work once, but not the next day). Haven't tried that on the DVD player though.

183 posts

Master Geek


  Reply # 153336 1-Aug-2008 14:53
Send private message

See if it works with the dvd player.



10 posts

Wannabe Geek


  Reply # 153407 1-Aug-2008 18:41
Send private message

Have tried dvd via composite - still no joy. I'm not surprised really as it is just converted into SVHS via the cable anyway. At this stage I can only see two options - delete everything and start again, or send the card back and ask for a replacement. Don't really want to have to reinstall everything,  but I'm sure if I send the card back and they can't find anything wrong I'll end up paying for it...

160 posts

Master Geek
+1 received by user: 8


  Reply # 153415 1-Aug-2008 19:30
Send private message

The only way I could get a working S-VHS connection into my HVR-2200 was to set up a Cable TV connection in Vista Media Centre. I tried for days to get it working in PowerCinema and even poked around in DVBViewer hoping they would detect it but, no joy.

The major problem appears to be that the S-Video connection has to use one of the two tuners. The S-Video port is not a seperate item. Even setting it up in media centre is a bit of a mission because the Cable connection option assumes hard wired remote control cables are connected to your STB. You can skip past this part of the setup but causes problems when trying to record from the S-Video connection. (I have sky feeding into it via MCE but because it conflicts with DBVViewer it's not an acceptable solution for me)

I have read on some other forums that some types of TV software will accept 'SVHS' or 'SVHS1' as a TV channel which gives you a connection to the port.

Good Luck.

108 posts

Master Geek
+1 received by user: 2


  Reply # 153517 2-Aug-2008 10:40
Send private message

This may be a silly question but have you clicked the "Add SVHS/VHS Channels" button in the Media Portal TV Server config under TV Servers -> ServerName --> Analogue Hauppauge Win TV...? I got caught out with this recently when setting up the same thing as you. I had manually added a channel then under the analogue tab selected SVHS1, but without the step above it won't work. Just a thought...

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39


UAV Traffic Management Trial launching today in New Zealand
Posted 12-Dec-2017 16:06


UFB connections pass 460,000
Posted 11-Dec-2017 11:26


The Warehouse Group to adopt IBM Cloud to support digital transformation
Posted 11-Dec-2017 11:22


Dimension Data peeks into digital business 2018
Posted 11-Dec-2017 10:55


2018 Cyber Security Predictions
Posted 7-Dec-2017 14:55


Global Govtech Accelerator to drive public sector innovation in Wellington
Posted 7-Dec-2017 11:21


Stuff Pix media strategy a new direction
Posted 7-Dec-2017 09:37


Digital transformation is dead
Posted 7-Dec-2017 09:31


Fake news and cyber security
Posted 7-Dec-2017 09:27


Dimension Data New Zealand strengthens cybersecurity practice
Posted 5-Dec-2017 20:27


Epson NZ launches new Expression Premium Photo range
Posted 5-Dec-2017 20:26


Eventbrite and Twickets launch integration partnership in Australia and New Zealand
Posted 5-Dec-2017 20:23


New Fujifilm macro lens lands in New Zealand
Posted 5-Dec-2017 20:16



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.