Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


59 posts

Master Geek


Topic # 25242 16-Aug-2008 09:05
Send private message

Hi, I've been working on an HTPC for my dad. And I've run into a slight issue.

He already has Sky digital, and has now built up an HTPC, and I am currently running MediaPortal on it with a Happauge PVR-350.

We are running the antenna and dish feeds into the skydigi box, then running the antenna feed from there to the PC. I can tune in reuglar channels fine using mediaportal, but it won't tune the output channel of the skydigi box.

I have also tried outputting from one of the scart ports on the skydigi box to the s-video in on the pvr350. That works and i get the sky signal, however the PC doesn't seem to want to pass the line-in audio to it's optical output, so we get no sound (we do if we plug headphone into the front of the pc.

Has anyone run a htpc with sky digital? Am I trying the right things?

Thanks for the help.

Create new topic
4025 posts

Uber Geek
+1 received by user: 1076

Trusted

  Reply # 157417 16-Aug-2008 14:10
Send private message

Optical out is set in AC3 direct passthrough or something by the sound of that, change your codec settings/sound card settings so it will decode it. You should be able to get svideo working with audio. Make sure you have AC3filter or something installed, this should allow you to change it in mediaportal options i think.

I'm in the process of setting up sky with mediaportal with a HVR-2200, except im IR blasting so i dont have to use the sky remote too, and when recording it will auto change channel.

22 posts

Geek


  Reply # 159526 25-Aug-2008 11:45
Send private message

MediaPortal didn't successfully tune analogue channels for me either, so I manually added Prime and the UHF output of my Sky decoder. I looked at the Sky decoder setup for UHF, it said channel 38, then I went to www.lincrad.co.nz to get the Prime UHF frequency and calculate what channel 38 was in Mhz. When you add the analogue channels manually, enter the frequency. Using an HVR2200 I also had to setup grouping of the Digital/Analogue combinations, otherwise I got the error "Unable to start timeshifting" when changing between Digital & analogue.




59 posts

Master Geek


  Reply # 159544 25-Aug-2008 13:07
Send private message

gyrogearloose:

MediaPortal didn't successfully tune analogue channels for me either, so I manually added Prime and the UHF output of my Sky decoder. I looked at the Sky decoder setup for UHF, it said channel 38, then I went to www.lincrad.co.nz to get the Prime UHF frequency and calculate what channel 38 was in Mhz. When you add the analogue channels manually, enter the frequency. Using an HVR2200 I also had to setup grouping of the Digital/Analogue combinations, otherwise I got the error "Unable to start timeshifting" when changing between Digital & analogue.



thanks for that.

2 questions. i haven't been looking at the freq stuff for long. How did you calculate that?

and for the grouping, was that just putting them in the same group in the mediaportal tv server setup?

22 posts

Geek


  Reply # 159551 25-Aug-2008 13:38
Send private message

Frequencies: the lincrad site shows the transmitter sites and the frequency of each channel. Each slot uses 8 Mhz, so figure out what frequency your Sky decoder is putting out by looking at the Sky setup, and then extrapolate from the closest lincrad value.

Grouping: kiwijunglist had replied to a thread I raised, noting "2) Try enabling hybrid mode, the instructions are in mediaportal tvserver configuration wiki, the link is via the main mediaportal homepage." And yes, you create groups containing a Digital and an Analogue tuner



59 posts

Master Geek


  Reply # 159580 25-Aug-2008 14:30
Send private message

Thanks a lot.

when i get a chance I'll head to my dads place and work on it some more.

4025 posts

Uber Geek
+1 received by user: 1076

Trusted

  Reply # 159641 25-Aug-2008 17:11
Send private message

RE: HVR-2200 "cannot start timeshifting"
The solution here is using the latest Mediaportal SVN as this bug has been fixed. Also ensure you group the first analogue and first digital together to get the hybrid combinations right.

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Microsoft Dynamics 365 Business Central launches
Posted 10-Jul-2018 10:40


Spark completes first milestone in voice platform upgrade
Posted 10-Jul-2018 09:36


Microsoft ices heated developers
Posted 6-Jul-2018 20:16


PB Technologies charged for its extended warranties and warned for bait advertising
Posted 3-Jul-2018 15:45


Almost 20,000 people claim credits from Spark
Posted 29-Jun-2018 10:40


Cove sells NZ's first insurance policy via chatbot
Posted 25-Jun-2018 10:04


N4L helping TAKA Trust bridge the digital divide for Lower Hutt students
Posted 18-Jun-2018 13:08


Winners Announced for 2018 CIO Awards
Posted 18-Jun-2018 13:03


Logitech Rally sets new standard for USB-connected video conference cameras
Posted 18-Jun-2018 09:27


Russell Stanners steps down as Vodafone NZ CEO
Posted 12-Jun-2018 09:13


Intergen recognised as 2018 Microsoft Country Partner of the Year for New Zealand
Posted 12-Jun-2018 08:00


Finalists Announced For Microsoft NZ Partner Awards
Posted 6-Jun-2018 15:12


Vocus Group and Vodafone announce joint venture to accelerate fibre innovation
Posted 5-Jun-2018 10:52


Kogan.com to launch Kogan Mobile in New Zealand
Posted 4-Jun-2018 14:34


Enable doubles fibre broadband speeds for its most popular wholesale service in Christchurch
Posted 2-Jun-2018 20:07



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.