Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




2548 posts

Uber Geek
+1 received by user: 88


Topic # 54006 15-Dec-2009 08:38
Send private message

Hi

I just got HP MCE Compatible remote + blaster.

I pluged it into my computer, XP and it is instantly recognised as eHome Infrared receiver in device manager without installing any drivers.  The remote works instantly as MCE compatible remote in Mediaportal which is great.

What do you think the best way is to remap the Vol +/- buttons to send an IR blasting command to my audio receiver?  Has anyone actually done this?

I tried using HIP, but it didn't seem to recognise my remote.

Regards
Kiwi





HTPC: Intel i3-2100 / 12GB RAM / AMD HD7750 / 480 GB SSD / 58TB Storage / MediaPortal / MadVR / Win10
AVR: Pioneer Elite SC-LX87 220W 9.2 Ch AVR
Speakers: Wharfedale Jade 7 Fronts / Jade 2c Center / Jade 5 Rears
Subs: iNuke 3000dsp 3000W proamp with 4x 15" JBL Sealed Subs
Display: Samsung 60" UA60H6400 LCD TV
Accessories: Gefen HDMI Detective with splitter


Create new topic
1072 posts

Uber Geek
+1 received by user: 170


  Reply # 282608 15-Dec-2009 11:16
Send private message

Not sure about the hp remote but the Microsoft MCE allows the volume buttons on the remote to be re-programmed. i.e. learning from another remote. Not for mute unfortunately though. Receiving and reblasting volume will be a bit slow and annoying, it's bad enough for mute. As for blasting I use a combination of a IR Server suite tools and a hacked up copy of MPtray (c#). Basically it handles powering the amp and TV on and off, switching inputs (amp&TV) between xbox and pc as well as loading MediaPortal with the green button. If you're a bit familiar with c# I can give the code.




25347 posts

Uber Geek
+1 received by user: 5188

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 282612 15-Dec-2009 11:23
Send private message

On the genuine Microsoft MCE remotes the volume and power buttons can be remaped as the remote is a learning one. No idea if it works on any of the 3rd party remotes.


The TV, VOL +, and VOL – buttons on the remote control for Media Center PC can
“learn” IR commands from other remote controls. This feature lets you use the TV
button to turn on your TV and the VOL + and VOL - buttons to adjust the volume on your
TV or another device, such as an audio receiver.
Notes
• By default, the VOL + and VOL - buttons on the remote control for Media Center PC
control the system volume on your computer, and the TV button has no command
assigned to it until it “learns” one.
• Do not perform this procedure in bright natural or artificial light.
To program buttons on the remote control by using the learning feature
1 Place the remote control for Media Center PC head to head (2 to 3 inches apart)
with the remote control from which it is learning.
2 On the remote control for Media Center PC, press and hold the DVD MENU and OK
buttons at the same time until the remote control lights turn off
(2 seconds).
The remote is now in learning setup mode.
3 On the remote control for Media Center PC, press and release the TV,
VOL +, or VOL – button, depending on which command you want it to learn.
The remote control for Media Center PC lights blink once to confirm the selection.
4 On the remote control that is teaching the command, press and hold the button that
you want the corresponding button on the remote control for Media Center PC to
learn.
The remote control for Media Center PC lights blink twice to confirm the selection.
If the remote did not learn the command, the lights blink quickly four times. To try
again, repeat steps 1 through 4.
5 Repeat steps 1 through 4 for the other buttons that can learn commands.
To restore the default remote control settings
1 Press and hold the DVD MENU button and LEFT navigation button at the same time
until the remote control for Media Center PC lights turn off.
2 Press the OK button.
The remote control for Media Center PC lights blink twice to confirm that the buttons
have been reset. The TV button will have no command assigned to it and the VOL +
and VOL – buttons will adjust the Media Center PC system volume.
If the default settings were not restored, the lights blink quickly four times. To try
again, repeat steps 1 and 2.


If that doesn't work you'll have to use 3rd party software like HIP to learn the commands and use an IR blaster in front of the other devices.

 
 
 
 




2548 posts

Uber Geek
+1 received by user: 88


  Reply # 282620 15-Dec-2009 11:34
Send private message

i eventually got HIP working using some replacement drivers.
everytime i learn an IR command the CCF codes look different
i can blast the ir codes and it is blasting something because if i blast the ir receiver the receiving light goes on, so that is good.
however i havnt been able to sucessfully blast my tv or amp, it's like its not learning the codes properly. have tried relearning a million times.




HTPC: Intel i3-2100 / 12GB RAM / AMD HD7750 / 480 GB SSD / 58TB Storage / MediaPortal / MadVR / Win10
AVR: Pioneer Elite SC-LX87 220W 9.2 Ch AVR
Speakers: Wharfedale Jade 7 Fronts / Jade 2c Center / Jade 5 Rears
Subs: iNuke 3000dsp 3000W proamp with 4x 15" JBL Sealed Subs
Display: Samsung 60" UA60H6400 LCD TV
Accessories: Gefen HDMI Detective with splitter




2548 posts

Uber Geek
+1 received by user: 88


  Reply # 282639 15-Dec-2009 12:10
Send private message

I'm thinking the IR receiver/blaster might be faulty.
Reason Port 1 - No blinking LED when blasting
Port 2 - LED blinks when blasting.




HTPC: Intel i3-2100 / 12GB RAM / AMD HD7750 / 480 GB SSD / 58TB Storage / MediaPortal / MadVR / Win10
AVR: Pioneer Elite SC-LX87 220W 9.2 Ch AVR
Speakers: Wharfedale Jade 7 Fronts / Jade 2c Center / Jade 5 Rears
Subs: iNuke 3000dsp 3000W proamp with 4x 15" JBL Sealed Subs
Display: Samsung 60" UA60H6400 LCD TV
Accessories: Gefen HDMI Detective with splitter


1072 posts

Uber Geek
+1 received by user: 170


  Reply # 282762 15-Dec-2009 16:12
Send private message

If it's the same as the MS one which I suspect it is. Then sometimes one blaster stops working, try replugging the usb otherwise reboot. I'd try the IR server suite tools, the translator lets you learn commands then use the test button blast them back, it also has command line tools






2548 posts

Uber Geek
+1 received by user: 88


  Reply # 282809 15-Dec-2009 17:26
Send private message

Thanks for your suggestion,

I know that port 1 doesn't work because when i blast a code back to the receiver i don't get a red flash on either the blaster led, or the receiver led, whereas with port 2 i get a red flash from the blaster followed by a red flash on the recevier (if i aim the blaster at the receiver)..

I've tried IRSS/HIP/MCEIR command line tools with both IR ports. none of them seem to blast my audio receiver with the learned codes. I've given up.

Atleast now I have a reliable PC remote (the old imon was not reliable remote)




HTPC: Intel i3-2100 / 12GB RAM / AMD HD7750 / 480 GB SSD / 58TB Storage / MediaPortal / MadVR / Win10
AVR: Pioneer Elite SC-LX87 220W 9.2 Ch AVR
Speakers: Wharfedale Jade 7 Fronts / Jade 2c Center / Jade 5 Rears
Subs: iNuke 3000dsp 3000W proamp with 4x 15" JBL Sealed Subs
Display: Samsung 60" UA60H6400 LCD TV
Accessories: Gefen HDMI Detective with splitter


1072 posts

Uber Geek
+1 received by user: 170


  Reply # 282908 15-Dec-2009 20:48
Send private message

Yea I get the exact same symptoms sometimes where one of the blasters stops blasting. Also when your learning the commands make sure you put the remote right up to the receiver.






2548 posts

Uber Geek
+1 received by user: 88


  Reply # 282948 15-Dec-2009 22:10
Send private message

hi, mcraenz, please tell me which symptoms do you get when the blaster stops working?




HTPC: Intel i3-2100 / 12GB RAM / AMD HD7750 / 480 GB SSD / 58TB Storage / MediaPortal / MadVR / Win10
AVR: Pioneer Elite SC-LX87 220W 9.2 Ch AVR
Speakers: Wharfedale Jade 7 Fronts / Jade 2c Center / Jade 5 Rears
Subs: iNuke 3000dsp 3000W proamp with 4x 15" JBL Sealed Subs
Display: Samsung 60" UA60H6400 LCD TV
Accessories: Gefen HDMI Detective with splitter


1072 posts

Uber Geek
+1 received by user: 170


  Reply # 282975 16-Dec-2009 00:07
Send private message

One of blasters just stops flashing when you send a command. A restart of IRSS service, USB replug or system reboot normally fixes it. Although in saying that ages ago I did have a actual blaster go faulty, I think one of the wires inside the little plastic blob broke.






2548 posts

Uber Geek
+1 received by user: 88


  Reply # 282980 16-Dec-2009 00:34
Send private message

ok, mine flashes but still doesn't blast.

I accidently bought 2x MCE compatible remotes, so I will try with the other one when it arrives.




HTPC: Intel i3-2100 / 12GB RAM / AMD HD7750 / 480 GB SSD / 58TB Storage / MediaPortal / MadVR / Win10
AVR: Pioneer Elite SC-LX87 220W 9.2 Ch AVR
Speakers: Wharfedale Jade 7 Fronts / Jade 2c Center / Jade 5 Rears
Subs: iNuke 3000dsp 3000W proamp with 4x 15" JBL Sealed Subs
Display: Samsung 60" UA60H6400 LCD TV
Accessories: Gefen HDMI Detective with splitter




2548 posts

Uber Geek
+1 received by user: 88


  Reply # 283921 18-Dec-2009 23:29
Send private message

got it going now.

I can't learn IR commands properly in XP.
Pluged into my vista machine learn the IR codes, then copied them over to my XP computer.
All working fine now.

I used this really really really really good program LM Remote KeyMap
http://www.lmgestion.net/@en-us/4/22/60/article.asp




HTPC: Intel i3-2100 / 12GB RAM / AMD HD7750 / 480 GB SSD / 58TB Storage / MediaPortal / MadVR / Win10
AVR: Pioneer Elite SC-LX87 220W 9.2 Ch AVR
Speakers: Wharfedale Jade 7 Fronts / Jade 2c Center / Jade 5 Rears
Subs: iNuke 3000dsp 3000W proamp with 4x 15" JBL Sealed Subs
Display: Samsung 60" UA60H6400 LCD TV
Accessories: Gefen HDMI Detective with splitter


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Symantec protects data everywhere with Information Centric Security
Posted 21-Sep-2017 15:33


FUJIFILM introduces X-E3 mirrorless camera with wireless connectivity
Posted 18-Sep-2017 13:53


Vodafone announces new plans with bigger data bundles
Posted 15-Sep-2017 10:51


Skinny launches phone with support for te reo Maori
Posted 14-Sep-2017 08:39


If Vodafone dropping mail worries you, you’re doing online wrong
Posted 11-Sep-2017 13:54


Vodafone New Zealand deploy live 400 gigabit system
Posted 11-Sep-2017 11:07


OPPO camera phones now available at PB Tech
Posted 11-Sep-2017 09:56


Norton Wi-Fi Privacy — Easy, flawed VPN
Posted 11-Sep-2017 09:48


Lenovo reveals new ThinkPad A Series
Posted 8-Sep-2017 14:37


Huawei passes Apple for the first time to capture the second spot globally
Posted 8-Sep-2017 10:45


Vodafone initiative enhances te reo Maori pronunciation on Google Maps
Posted 8-Sep-2017 10:40


Voyager Internet expand local internet phone services company with Conversant acquisition
Posted 6-Sep-2017 18:27


NOW Expands in to Tauranga
Posted 5-Sep-2017 18:16


Windows 10 Fall Creators Update coming Oct. 17
Posted 4-Sep-2017 14:10


Garmin introduce Garmin vivoactive 3
Posted 1-Sep-2017 18:38



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.