Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




166 posts

Master Geek
+1 received by user: 2


Topic # 109792 26-Sep-2012 22:17
Send private message

Now that I have my internet set-up and working through the FRITZ!Box, I have got a hold of some old firmware so that i can put in into modem only mode.

Does anyone know how to set up TomatoUSB (shibby on Asus N-66) to have a WAN connection over PPPoE that has the VLAN10, as required by snap?

Create new topic
8020 posts

Uber Geek
+1 received by user: 384

Trusted
Subscriber

  Reply # 691953 26-Sep-2012 22:44
Send private message


166 posts

Master Geek
+1 received by user: 2


  Reply # 691963 26-Sep-2012 23:30
Send private message

I tried to change the setting but still nothing, any idea what MTU should be set as?


 
 
 
 


25073 posts

Uber Geek
+1 received by user: 4956

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 691977 27-Sep-2012 06:14
Send private message

samsam: I tried to change the setting but still nothing, any idea what MTU should be set as?



Depends entirely what MTU your ISP supports. 1492 is reasonably typical.

755 posts

Ultimate Geek
+1 received by user: 241


  Reply # 692235 27-Sep-2012 13:46
Send private message

I'm using these settings for this:
My modem is a RTA1320v6 and my router is a RT-N16 running Tomato v1.28.7500 MIPSR2Toastman-RT K26 USB VLAN-Ext.

Modem:





Router:



IPv4 works fine, but Toastman's implementation of IPv6 is rather temperamental unfortunately (radvd keeps crashing, and needs to be started with a custom .config file to get v6 working).

25073 posts

Uber Geek
+1 received by user: 4956

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 692286 27-Sep-2012 14:50
Send private message

Chorus use VCMUX not LLC


755 posts

Ultimate Geek
+1 received by user: 241


  Reply # 692292 27-Sep-2012 14:54
Send private message

Dunno, I'm connected right now with it on LLC.

2240 posts

Uber Geek
+1 received by user: 352

Trusted
Subscriber

  Reply # 692295 27-Sep-2012 14:58
Send private message

samsam: Now that I have my internet set-up and working through the FRITZ!Box, I have got a hold of some old firmware so that i can put in into modem only mode.

Does anyone know how to set up TomatoUSB (shibby on Asus N-66) to have a WAN connection over PPPoE that has the VLAN10, as required by snap?


The VLAN10 config goes in the modem or whatever device you're using for that. On the router just setup the PPPoE part as usual.

755 posts

Ultimate Geek
+1 received by user: 241


  Reply # 692343 27-Sep-2012 16:28
Send private message

My modem doesn't support 802.1q tagging, so I have to do it via my router.
If your modem supports it, by all means use that instead.

78 posts

Master Geek


  Reply # 692596 28-Sep-2012 06:35

I'm running UFB on Asus RT-N16 Tomato Toastman (non-VLAN). I simpy executed this in command (Administration > Scripts - INI Tab)

nvram set vlan10hwname=et0
nvram set vlan10ports="0t 8"
nvram set wan_ifnameX=vlan10
nvram commit

Rebooted, then it worked.



166 posts

Master Geek
+1 received by user: 2


  Reply # 692634 28-Sep-2012 08:05
Send private message

Thanks, for the feedback I'll try those settings again. I have the FRITZ!Box provided by snap so maybe it just doesn't work on that. Might try with a different router

3032 posts

Uber Geek
+1 received by user: 829

Trusted

  Reply # 692672 28-Sep-2012 08:53
Send private message

When I asked here about options for bridging with the Fritzbox a couple of people said they'd tried just about everything to get it working (including the old firmware versions with that as an option) and couldn't get it to work. Considering they removed it from the firmware, maybe there were issues with it all along? The Fritzbox seems like a really good piece of kit, but I still wish I could use my gargoyle router with it (without double NATing)



166 posts

Master Geek
+1 received by user: 2


  Reply # 692683 28-Sep-2012 08:56
Send private message

Ok that's really helpful. I might just give up on it until I get a new modem (sell the fritz box). It works alright with DMZ only one set of port forwarding but that's not ideal

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Push notifications: A productivity killer
Posted 25-Jul-2017 14:15


Intergen takes SKYCITY to the cloud
Posted 25-Jul-2017 14:04


Nothing nebulous about Microsoft’s cloud-transition
Posted 21-Jul-2017 15:34


We’re spending more on tech, but not as much as Australians
Posted 21-Jul-2017 11:43


Endace announces EndaceFabric for network-wide packet recording
Posted 20-Jul-2017 20:49


Acorn 6: MacOS image editing for the rest of us
Posted 20-Jul-2017 17:04


HTC faces backlash over keyboard pop-up ads
Posted 19-Jul-2017 15:53


BNZ adds Visa credit cards to Android Pay wallet
Posted 18-Jul-2017 19:44


Still living in a Notification hell – Om Malik
Posted 18-Jul-2017 13:00


Duet Display uses iPad to extend Mac, PC
Posted 18-Jul-2017 10:58


PC sales could be worse
Posted 17-Jul-2017 07:34


Crypto-currencies, tulips, market bubbles
Posted 17-Jul-2017 06:38


NZ Tech Podcast: Big batteries, solar cars, cold war, IoT
Posted 16-Jul-2017 16:53


Vodafone Australia mulls Wisp alliance, NZ implications
Posted 13-Jul-2017 16:49


Rural health professionals see fibre pay-off
Posted 13-Jul-2017 11:52



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.