Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




88 posts

Master Geek
+1 received by user: 4


Topic # 190770 11-Jan-2016 20:40
Send private message

I purchased a Unifi AP a couple days ago as my family couldn't get any signal down the other end of the house through the Fritzbox. I need the FB for my voip hence I went with the AP instead of a new all in one.
Anywho, I read a few threads that say "simply turn off your FB WiFi, plug UniFi in, and away it goes".

I connected the AP to my Fritz, and set it up via the software - has been working great and no complaints yet due to lack of signal etc

Only thing is, I haven't disabled my fritzbox WiFi yet. 
Is there a reason for having to disable the WiFi on the FB?
Aside from having 2 "separate" networks listed, I don't mind keeping the FB WiFi up as well if it doesn't cause issues. 


Create new topic
7221 posts

Uber Geek
+1 received by user: 2287

Subscriber

  Reply # 1467982 11-Jan-2016 20:44
One person supports this post
Send private message

you can actually have them on the same name :) this can allow your devices to roam a little easier as opposed to having to connect at the other access point



88 posts

Master Geek
+1 received by user: 4


  Reply # 1467985 11-Jan-2016 20:49
Send private message

Cheers Jase - I have done that previously (at a different house) so will definitely do that again down the road.
Just gave it a separate name for now just so I can monitor it and make sure everything is stable on this AP :)



 
 
 
 


20578 posts

Uber Geek
+1 received by user: 3963

Trusted
Subscriber

  Reply # 1467987 11-Jan-2016 20:50
Send private message

Dont put them on the same name. Roaming will only work properly between identically configured accesspoints, and when they are that different then you cant guarentee that they are configured the same. Sure, the phone may connect to both of them, but roaming between them will have issues more often than not.




Richard rich.ms



88 posts

Master Geek
+1 received by user: 4


  Reply # 1467993 11-Jan-2016 20:54
Send private message

Oh - thanks for the headsup. Last time I did that, I had 2 fritzboxes so that maybe why it was okay.

Would you suggest keeping them separate or just disabling the FB one altogether? 

20578 posts

Uber Geek
+1 received by user: 3963

Trusted
Subscriber

  Reply # 1467997 11-Jan-2016 21:03
Send private message

Seperate SSID so that everything is renegotiated when it connects to the other one.

I was finding that thruput was stalling when on a fritz if it roamed over from a unifi to it. I have them bridged to the lan here and only use it for its voip features, its not doing the internet connection or NAT or anything. - Have just left them with the default fritz name and that all seems good, but due to range issues it doesnt ever see a roam directly between the 2 of them. They are barely in dect range of each other.




Richard rich.ms

'That VDSL Cat'
6968 posts

Uber Geek
+1 received by user: 1357

Trusted
Spark
Subscriber

  Reply # 1468001 11-Jan-2016 21:15
One person supports this post
Send private message

richms: Dont put them on the same name. Roaming will only work properly between identically configured accesspoints, and when they are that different then you cant guarentee that they are configured the same. Sure, the phone may connect to both of them, but roaming between them will have issues more often than not.


my experience has been quite different. never had any issues with roaming across many devices. - not to say it doesnt happen, simply that in my experience it hasnt over multiple setups.

The big downside to not being a managed solution though is its up to the client to handle it however, Andriod, iOS and windows devices seem to all handle this perfectly.


The only time roaming has not worked as expected is when i used an app to force connections to a particular AP, this hardcoded the channel into my phone and required the network to be "forgotten" and resetup to clear off.


roaming between 2.4ghz and 5ghz doesnt often happen but thats okay as a fixed device is likely cabled anyway.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.




88 posts

Master Geek
+1 received by user: 4


  Reply # 1468005 11-Jan-2016 21:31
Send private message

I may just leave it as is.

My family members just sit in their room and play their mobile games, so shouldn't need to "roam", and I myself run a wired connection and never go outside the fritzbox range anyways for my mobiles, so I guess it wouldn't do us any good changing the settings if it's working well already. 

Thanks for the input!

7221 posts

Uber Geek
+1 received by user: 2287

Subscriber

  Reply # 1468119 12-Jan-2016 06:01
Send private message

hio77:
my experience has been quite different. never had any issues with roaming across many devices. - not to say it doesnt happen, simply that in my experience it hasnt over multiple setups.

The big downside to not being a managed solution though is its up to the client to handle it however, Andriod, iOS and windows devices seem to all handle this perfectly.


Im in the same boat as hio77, never had an issue with the roaming at home or at my parents. have an app on my phone to help with it to switch to another access point if the signal strength drops below 55dBm. has worked flawlessly.

many people run it like this and have had no issues

409 posts

Ultimate Geek
+1 received by user: 77


  Reply # 1468160 12-Jan-2016 08:22
Send private message

I recommend running separate SSID's for the 2.4 and 5ghz networks as some devices can't manually select a specific network - mainly Apple.



88 posts

Master Geek
+1 received by user: 4


  Reply # 1468192 12-Jan-2016 09:00
Send private message

I've always run the 2.4 and 5ghz network with separate SSID's.

Maybe I'll give both methods a shot and see if issues arise. If not I'll join the names together so they roam, otherwise I can always go back to how it is now.

@Jase may I ask what app you use on your mobile for the switching?

'That VDSL Cat'
6968 posts

Uber Geek
+1 received by user: 1357

Trusted
Spark
Subscriber

  Reply # 1468290 12-Jan-2016 10:38
Send private message

Jase2985:
hio77:
my experience has been quite different. never had any issues with roaming across many devices. - not to say it doesnt happen, simply that in my experience it hasnt over multiple setups.

The big downside to not being a managed solution though is its up to the client to handle it however, Andriod, iOS and windows devices seem to all handle this perfectly.


Im in the same boat as hio77, never had an issue with the roaming at home or at my parents. have an app on my phone to help with it to switch to another access point if the signal strength drops below 55dBm. has worked flawlessly.

many people run it like this and have had no issues


personally i found those apps counter-productive..


walking around the house, my M8x doesnt even buffer streams, just hops along as signal gets low.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


7221 posts

Uber Geek
+1 received by user: 2287

Subscriber

  Reply # 1468448 12-Jan-2016 14:07
Send private message

im only on the 2.4ghz band and its called wifi roaming fix (for android)

my 5ghz network is a different name so have to connect manually. But I don't really roam wit the 5ghz devices and the phones can just stay on 2.4ghz as they don't need to be super fast.

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand hits peak broadband data
Posted 18-Jan-2018 12:21


Amazon Echo devices coming to New Zealand early February 2018
Posted 18-Jan-2018 10:53


$3.74 million for new electric vehicles in New Zealand
Posted 17-Jan-2018 11:27


Nova 2i: Value, not excitement from Huawei
Posted 17-Jan-2018 09:02


Less news in Facebook News Feed revamp
Posted 15-Jan-2018 13:15


Australian Government contract awarded to Datacom Connect
Posted 11-Jan-2018 08:37


Why New Zealand needs a chief technology officer
Posted 6-Jan-2018 13:59


Amazon release Silk Browser and Firefox for Fire TV
Posted 21-Dec-2017 13:42


New Chief Technology Officer role created
Posted 19-Dec-2017 22:18


All I want for Christmas is a new EV
Posted 19-Dec-2017 19:54


How clever is this: AI will create 2.3 million jobs by 2020
Posted 19-Dec-2017 19:52


NOW to deploy SD-WAN to regional councils
Posted 19-Dec-2017 19:46


Mobile market competition issues ComCom should watch
Posted 18-Dec-2017 10:52


New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.