Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Foo



508 posts

Ultimate Geek


# 109473 20-Sep-2012 12:55
Send private message

Has anyone used the Mort Bay USB Charger as shown here: http://www.mitre10mega.co.nz/shop/electrical_hardware/electrical_outlets_fittings/mort_bay_usb_charger_240v~50hz_176378/

I saw this in Mitre10 recently and wondered if anyone has used one without issues?

It has an output of 2100mah which is twice what my standard charger has (and four times what the terrible el cheapo chargers I purchased from Grabone have which take an insane amount of time to charge).

If anyone has used a Mort Bay USB charger, please share your experience. Keen to know charge time / if it has shortened the battery life of the charged device.

Thanks in advance!

Create new topic
2785 posts

Uber Geek


  # 688808 20-Sep-2012 13:45
Send private message

Current isn't pushed to devices, it just makes more available if a device is capable of drawing more.

Generally speaking, most devices will charge notably quicker with a 2A device than a typical 500mA supply.




Banana?
4870 posts

Uber Geek

Subscriber

  # 688815 20-Sep-2012 13:53
Send private message

and at 2.1A, it will happily charge an iPad.

 
 
 
 


22591 posts

Uber Geek

Trusted
Subscriber

  # 688835 20-Sep-2012 14:02
Send private message

Will all depend on what the data pins ID it as, to determine the charge current, also if it is sagging at load will allow higher current into some devices.

I hacked up a USB cable to put my meter in series with the power to see the current things take, not often at the max the charger can do.




Richard rich.ms

Foo



508 posts

Ultimate Geek


  # 688865 20-Sep-2012 14:43
Send private message

stevenz: Current isn't pushed to devices, it just makes more available if a device is capable of drawing more.

Generally speaking, most devices will charge notably quicker with a 2A device than a typical 500mA supply.


The Mort Bay charger claims that it charges devices at 'twice the speed' of a standard charger. Generally my SIII takes about 3 hours to charge when almost discharged.

Foo



508 posts

Ultimate Geek


  # 688868 20-Sep-2012 14:46
Send private message

richms: Will all depend on what the data pins ID it as, to determine the charge current, also if it is sagging at load will allow higher current into some devices. 


Is that potentially dangerous to the device if a higher current does enter the device? Or am I just paranoid ;-)

Awesome
4859 posts

Uber Geek

Trusted
Subscriber

  # 688874 20-Sep-2012 14:54
Send private message

Foo:
richms: Will all depend on what the data pins ID it as, to determine the charge current, also if it is sagging at load will allow higher current into some devices. 


Is that potentially dangerous to the device if a higher current does enter the device? Or am I just paranoid ;-)


I don't think you can 'force' current into a device, it will just draw what it wants (Voltage on the other hand...)

2.1 Amps is the same as my iPad charger, which will happily charge iPhones and my Galaxy SIII




Twitter: ajobbins


22591 posts

Uber Geek

Trusted
Subscriber

  # 688884 20-Sep-2012 15:06
Send private message

Foo:
richms: Will all depend on what the data pins ID it as, to determine the charge current, also if it is sagging at load will allow higher current into some devices. 


Is that potentially dangerous to the device if a higher current does enter the device? Or am I just paranoid ;-)


The only way to force more in is to have a higher voltage.

The voltage sagging on a charger is normal, its how the 500mA ones dont blow up when you put in something that would happily take over an amp if it could.

I have seen issues on some cheap chinese not legal to sell here ones where they had no current limiting so if you put a hub on it and 4 phones to try to charge them all as a friend did, it got hot and released that magic smelling smoke.




Richard rich.ms

 
 
 
 


gzt

10937 posts

Uber Geek


  # 689330 21-Sep-2012 11:55
Send private message

Foo:
stevenz: Current isn't pushed to devices, it just makes more available if a device is capable of drawing more.

Generally speaking, most devices will charge notably quicker with a 2A device than a typical 500mA supply.


The Mort Bay charger claims that it charges devices at 'twice the speed' of a standard charger.


This is a really silly general claim for the manufacturer to make in the first place. It depends on how the charged device is designed to a large extent. The charger does not do what it claims so take it back.

Personally I do not trust any aftermarket chargers. The devices are expensive so why risk them with rubbish chargers not designed by the manufacturer.


Foo



508 posts

Ultimate Geek


  # 689345 21-Sep-2012 12:15
Send private message

gzt:
Foo:
stevenz: Current isn't pushed to devices, it just makes more available if a device is capable of drawing more.

Generally speaking, most devices will charge notably quicker with a 2A device than a typical 500mA supply.


The Mort Bay charger claims that it charges devices at 'twice the speed' of a standard charger.


This is a really silly general claim for the manufacturer to make in the first place. It depends on how the charged device is designed to a large extent. The charger does not do what it claims so take it back.

Personally I do not trust any aftermarket chargers. The devices are expensive so why risk them with rubbish chargers not designed by the manufacturer.



I haven't purchased one yet, I wanted to know other users experiences before buying.

I don't really care if it takes the same amount of time, anything has to be better than charging via either PC USB port or using one of the crappy under powered aftermarket chargers.

Anyone know how much a stock charger costs?

2988 posts

Uber Geek


  # 689361 21-Sep-2012 12:45
Send private message

Dont have one - but might buy one.
Where did you see that its 2.1A ?

Was looking at a USB point/charger to run my Raspberry Pi.
My Galaxy Ace charger only puts out .5A - its supposed to need 1A.
My wifes galaxy s3 charger works fine - its 1A.

If its 2.1A I think its safe to say it will charge your S3 as fast as it can possibly be charged - however long that may be.

I think I saw somewhere that the 'official' Samsung charger is quite pricey - the advantage with this of course is that you could probably charge 2 devices at once.

The claim about charging twice as fast is a theoretical claim - but wouldnt be true for everyone.




Nothing is impossible for the man who doesn't have to do it himself - A. H. Weiler

Foo



508 posts

Ultimate Geek


  # 689991 22-Sep-2012 19:30
Send private message

robjg63: Dont have one - but might buy one.
Where did you see that its 2.1A ?


When I was in Mitre 10 and also when I searched online for it.

3877 posts

Uber Geek

Subscriber

  # 690068 23-Sep-2012 03:48
Send private message

I bought a couple ofbthese some time ago - really good:

http://www.amazon.com/EZOPower-Charger-interchangeable-Cellphone-Powered/dp/B006VP6X4U

Here's some more:

http://www.amazon.com/EZOPower-Charger-interchangeable-Cellphone-Powered/dp/B006VP6X4U

http://www.google.com./search?as_q=USB+charger+white+port&as_epq=&as_oq=4+four&as_eq=&as_nlo=&as_nhi=&lr=&cr=&as_qdr=all&as_sitesearch=&as_occt=any&safe=off&tbs=&as_filetype=&as_rights=







Sometimes I just sit and think. Other times I just sit.


22591 posts

Uber Geek

Trusted
Subscriber

  # 690106 23-Sep-2012 11:22
Send private message

I got an identical looking one off dx since it has a legit looking nz plug rather than the typical upside down china plug from there.


Not the best. Htc phone IDs it as usb charging so its slooooooow. Apple gear is slow. Only 2 amps over 4 ports.

And a needless blue led or 2 in the plastic around the sockets is impossible to cover with black tape.




Richard rich.ms

2785 posts

Uber Geek


  # 690565 24-Sep-2012 12:15
Send private message

I use USB chargers that came with Samsung tablets. They're all good quality 2A chargers and charge all my various things nice and quickly.




Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Spark launches new wireless broadband "Unplan Metro"
Posted 11-Nov-2019 08:19


Malwarebytes overhauls flagship product with new UI, faster engine and lighter footprint
Posted 6-Nov-2019 11:48


CarbonClick launches into Digital Marketplaces
Posted 6-Nov-2019 11:42


Kordia offers Microsoft Azure Peering Service
Posted 6-Nov-2019 11:41


Spark 5G live on Auckland Harbour for Emirates Team New Zealand
Posted 4-Nov-2019 17:30


BNZ and Vodafone partner to boost NZ Tech for SME
Posted 31-Oct-2019 17:14


Nokia 7.2 available in New Zealand
Posted 31-Oct-2019 16:24


2talk launches Microsoft Teams Direct Routing product
Posted 29-Oct-2019 10:35


New Breast Cancer Foundation app puts power in Kiwi women's hands
Posted 25-Oct-2019 16:13


OPPO Reno2 Series lands, alongside hybrid noise-cancelling Wireless Headphones
Posted 24-Oct-2019 15:32


Waikato Data Scientists awarded $13 million from the Government
Posted 24-Oct-2019 15:27


D-Link launches Wave 2 Unified Access Points
Posted 24-Oct-2019 15:07


LG Electronics begins distributing the G8X THINQ
Posted 24-Oct-2019 10:58


Arlo unveils its first video doorbell
Posted 21-Oct-2019 08:27


New Zealand students shortlisted for James Dyson Award
Posted 21-Oct-2019 08:18



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.