Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




3366 posts

Uber Geek
+1 received by user: 383

Trusted

Topic # 147035 6-Jun-2014 13:34
Send private message

Hey guys,
So was speaking with someone today where they need to scan barcodes in their work yard to mark them off against a database (with a web front end). I thought it would be pretty simple to create a mobile site and have this run on an android hooked up to a barcode scanner. Is is possible to get some kind of bluetooth scanner gun which you could mount a smartphone on the top of perhaps? Or something else? The mobile site will probably be using quite a bit of fancy html5/css3 so a durable/grunty Android phone would probably be good to pair it with.

Maybe something like this:






Create new topic

Stu

Hammered
4723 posts

Uber Geek
+1 received by user: 943

Moderator
Trusted
Subscriber

  Reply # 1060384 6-Jun-2014 13:50
Send private message

Can you not simply use the phone's on board camera and install a barcode app? If the barcode is of the QR variety it could send them straight of to the right place, logging them in?

348 posts

Ultimate Geek
+1 received by user: 83


  Reply # 1060386 6-Jun-2014 13:53
Send private message

Why would you not just use the phone camera? Then, use something like this https://github.com/manuels/unix-toolbox.js-exact-image/, for example, to read the barcode from the camera image.

 
 
 
 


BDFL - Memuneh
58919 posts

Uber Geek
+1 received by user: 10292

Administrator
Trusted
Geekzone
Subscriber

  Reply # 1060389 6-Jun-2014 13:58
One person supports this post
Send private message

Moved to correct forum, resized image, updated subject to something meaningful. Pay attention folks. If you post gibberish in the wrong subforum the chances of getting meaningful help/comments is greatly reduced.





2267 posts

Uber Geek
+1 received by user: 642

Trusted
Subscriber

  Reply # 1060424 6-Jun-2014 15:16
Send private message

Zeon: The mobile site will probably be using quite a bit of fancy html5/css3 so a durable/grunty Android phone would probably be good to pair it with.

Barcode scanners built into a Windows Mobile device are the kind of devices used by couriers and in larger warehouses.  Sometimes these devices have an app loaded onto them but increasingly they scan to a web page so the underlying OS on the device is becoming less important.

If being used in the 'yard' or warehouse of ANY organisation, the front end must be painfully simple.  A box that the scan code is entered into, a box to enter in the quantity of units (or a second box that the yardsman scans a quantity into from a handy set of barcodes stuck on a wall every few meters if quantities must be entered rather than repeated scans).  No 'accept/save' button on the screen even, just scan, scan, scan.

In that environment you might have a few clued up people, but you will also have some real 'grunts' and you are catering for the lowest common denominator.  The more whizz you add to the front end for the people at the coal face, the greater the chance of the whole project being a failure.  I cannot stress that enough.  The opinions of others may vary.

Motorola do some very nice PDT's (Portable Data Terminals) in varying configurations, and the extended warranties cover accidental damage.  They are not cheap, but who else would cover equipment being accidentally dropped off the top pallet rack in a warehouse in their warranty?




"4 wheels move the body.  2 wheels move the soul."

“Don't believe anything you read on the net. Except this. Well, including this, I suppose.” Douglas Adams

345 posts

Ultimate Geek
+1 received by user: 156

Subscriber

  Reply # 1060433 6-Jun-2014 15:36
Send private message

Zebra Crossing is generally considered the best Android camera-based code scanner. Has good support for a variety of *code types. https://github.com/zxing/zxing Also have a user-friendly scanner app. Making a fork of the app which automatically sends scans to your web app may be the easiest way to go. I've found the camera scanning to be fast and reliable.

Stu

Hammered
4723 posts

Uber Geek
+1 received by user: 943

Moderator
Trusted
Subscriber

  Reply # 1060438 6-Jun-2014 15:58
Send private message


3366 posts

Uber Geek
+1 received by user: 383

Trusted

  Reply # 1060458 6-Jun-2014 16:45
Send private message

Hey guys, thanks for the feedback. There is no way I could imagine a camera based barcode reader being used in a production environment - they are just way too slow and finicky.

Dynamic:
Zeon: The mobile site will probably be using quite a bit of fancy html5/css3 so a durable/grunty Android phone would probably be good to pair it with.

Barcode scanners built into a Windows Mobile device are the kind of devices used by couriers and in larger warehouses.  Sometimes these devices have an app loaded onto them but increasingly they scan to a web page so the underlying OS on the device is becoming less important.

If being used in the 'yard' or warehouse of ANY organisation, the front end must be painfully simple.  A box that the scan code is entered into, a box to enter in the quantity of units (or a second box that the yardsman scans a quantity into from a handy set of barcodes stuck on a wall every few meters if quantities must be entered rather than repeated scans).  No 'accept/save' button on the screen even, just scan, scan, scan.

In that environment you might have a few clued up people, but you will also have some real 'grunts' and you are catering for the lowest common denominator.  The more whizz you add to the front end for the people at the coal face, the greater the chance of the whole project being a failure.  I cannot stress that enough.  The opinions of others may vary.

Motorola do some very nice PDT's (Portable Data Terminals) in varying configurations, and the extended warranties cover accidental damage.  They are not cheap, but who else would cover equipment being accidentally dropped off the top pallet rack in a warehouse in their warranty?


Yea definitely thinking the front end should be super simple. Just scan into a box and show a result pretty much - waiting for the next scan. Wanted to add a couple of extra options like view history button and maybe play a sound (using javascript and HTML5) when the scan is successfully matched (or another sound if not). It would have to be AJAX I think.

Yea I was thinking of those Motorola ones as they are pretty rugged. Not sure if they have 3g/wifi and a HTML5 browser though?





345 posts

Ultimate Geek
+1 received by user: 156

Subscriber

  Reply # 1060467 6-Jun-2014 16:57
Send private message

Whoa dude, don't buy expensive equipment equipment. Give them cheap android phones with rugged cases, fork the zebra crossing app to always direct to your website, you're done. No need to reinvent the wheel! Android gives all you need.







3366 posts

Uber Geek
+1 received by user: 383

Trusted

  Reply # 1060491 6-Jun-2014 18:00
Send private message

Yea I think a cheap Android with super rugged case should suffice. I still reckon the camera based barcode reading will be too slow and cumbersome. A laser one should be faster and easier to aim.





305 posts

Ultimate Geek
+1 received by user: 46


  Reply # 1060507 6-Jun-2014 18:25
2 people support this post
Send private message

If you get a usb otg compatible android device then you can just plug in a regular laser barcode scanner and use that, I've done this with a Galaxy s3 and it worked flawlessly.

2042 posts

Uber Geek
+1 received by user: 490


  Reply # 1060541 6-Jun-2014 20:24
Send private message

Poll: If you get a usb otg compatible android device then you can just plug in a regular laser barcode scanner and use that, I've done this with a Galaxy s3 and it worked flawlessly.


Can the phone power it?

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Nokia 8 review: Classy midrange pure Android phone
Posted 16-Oct-2017 07:27


Why carriers might want to embrace Commerce Commission study, MVNOs
Posted 13-Oct-2017 09:42


Fitbit launches Ionic, its health and fitness smartwatch
Posted 12-Oct-2017 15:52


Xero launches machine learning automation to improve coding accuracy for small businesses
Posted 12-Oct-2017 15:45


Bank of New Zealand uses Intel AI to detect financial crime
Posted 12-Oct-2017 15:39


Sony launches Xperia XZ1, a smartphone with real-time 3D capture
Posted 11-Oct-2017 10:26


Notes on Nokia’s phone comeback
Posted 10-Oct-2017 10:06


Air New Zealand begins Inflight Wi-Fi rollout
Posted 9-Oct-2017 20:16


The latest mobile phones in perspective
Posted 9-Oct-2017 18:34


Review: Acronis True Image 2018 — serious backup
Posted 8-Oct-2017 11:22


Lenovo launches ThinkPad Anniversary Edition 25
Posted 7-Oct-2017 23:16


Less fone, more tech as Vodafone gets brand make-over
Posted 6-Oct-2017 08:16


API Talent Achieves AWS MSP Partner Status
Posted 5-Oct-2017 21:20


Stellar Consulting Group now a Domo Partner
Posted 5-Oct-2017 21:03


Xero passes quarter of a million subscriber milestone in UK
Posted 5-Oct-2017 21:02



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.