No sound/WiFi i9505 after multiple flashes

Forums › Mobile handsets › No sound/WiFi i9505 after multiple flashes

xbmcnut

501 posts

Ultimate Geek
+1 received by user: 49

#150614 28-Jul-2014 14:37

Hi,

Ive been running Cyanogenmod for over a year and regularly upgrade but the recent move to CM11 0715 Nightly corrupted my EFS folder and I lost my modem, IMEI, APN's etc. Of course, no EFS backup (know better now!) blah blah. The only way I could restore the modem was to install I9505XXUGNE5_I9505VNZGNF2_I9505XXUGNE5_HOME.tar which is 4.4.2. Modem back but could not turn on WiFi and no sound. Flashed CM11 M7 and modem and WiFi working but still no sound.

Have reinstated stock 4.2.2 now and oddly, there is no sign of Know in the recovery screen.

Have read that ticking 'Auto Reboot' in ODIN causes the modem install to fail and that causes these issues but I've tried that too without joy. Apparently the correct modem needs to be restored to fix the sound but I'm not sure where to go now.

Any assistance would be greatly appreciated before I end up with a divorce!

RS820+, DS223, CoreELEC on Odroid N2+, 3 x Echo Dot & 7 x Google Homes connected to Home Assistant on Beelink SEi12.

dontpanic42

1574 posts

Uber Geek
+1 received by user: 11

#1097164 28-Jul-2014 15:18

Here's a list of 9505 modems. :)

http://forum.xda-developers.com/showthread.php?t=2192025

xbmcnut

501 posts

Ultimate Geek
+1 received by user: 49

#1097202 28-Jul-2014 16:02

Thanks for the prompt reply. Already been there and flashed multiple modems without success.

RS820+, DS223, CoreELEC on Odroid N2+, 3 x Echo Dot & 7 x Google Homes connected to Home Assistant on Beelink SEi12.

jeffnz

2870 posts

Uber Geek
+1 received by user: 666

Trusted

Lifetime subscriber

#1097211 28-Jul-2014 16:16

You need to flash the modem twice in Odin, un-tick reboot then do a manual reboot back to download and reflash again using Odin.

Galaxy S10

Garmin Fenix 5

xbmcnut

501 posts

Ultimate Geek
+1 received by user: 49

#1097220 28-Jul-2014 16:23

@jeffnz

Thanks. Tried that multiple times too. Still no sound or WiFi under stock. Can get WiFi back by reverting to a CM11 backup but still no sound.

RS820+, DS223, CoreELEC on Odroid N2+, 3 x Echo Dot & 7 x Google Homes connected to Home Assistant on Beelink SEi12.

uglyb0b

335 posts

Ultimate Geek
+1 received by user: 19

#1097244 28-Jul-2014 17:11

How did you downgrade to stock 4.2.2? Normally you wouldn't be able to downgrade from stock kitkat so I'm thinking it may have not updated the bootloader when you flashed the stock kitkat rom. This would explain the issues with the wifi/sound etc.

What is it running at the moment? Do you have an IMEI showing when typing *#06# in the dialler? What modem is it using?

uglyb0b

335 posts

Ultimate Geek
+1 received by user: 19

#1097247 28-Jul-2014 17:14

xbmcnut:
Have reinstated stock 4.2.2 now and oddly, there is no sign of Know in the recovery screen.

I'm assuming by this you meant knox in download mode. Did you have any mention of knox in download mode prior to this? If not, this would indicate you are on the old bootloader.

Samsung

Shop now on Samsung phones, tablets, TVs and more (affiliate link).

xbmcnut

501 posts

Ultimate Geek
+1 received by user: 49

#1097253 28-Jul-2014 17:19

Thanks and sorry, download mode. And yes, it appears I'm on the old bootloader.

RS820+, DS223, CoreELEC on Odroid N2+, 3 x Echo Dot & 7 x Google Homes connected to Home Assistant on Beelink SEi12.

uglyb0b

335 posts

Ultimate Geek
+1 received by user: 19

#1097257 28-Jul-2014 17:23

What happened when you flashed the stock kitkat rom? This should have updated the bootloader (which would mention knox in download mode) if it didn't update it this may explain why you're having issues.

Are you specifically wanting to avoid the knox bootloader? If you're not bothered, you could try restoring the 4.2.2 stock rom and then try updating in kies after a factory reset. This will ensure the right components all get updated.

Otherwise, when running stock 4.2.2 what shows up when typing in *#06# and *#1234#?

xbmcnut

501 posts

Ultimate Geek
+1 received by user: 49

#1097345 28-Jul-2014 18:45

Under 4.2.2, *#06# returns my IMEI number and I get the following with *#1234#

AP: I9505XXUBMG4
CP: I9505XXUBMG4
CSC: I9505VNZBMG3

I'm wanting to go back to CM11 and not worried about warranty but best if I can keep Know out of the picture?

RS820+, DS223, CoreELEC on Odroid N2+, 3 x Echo Dot & 7 x Google Homes connected to Home Assistant on Beelink SEi12.

xbmcnut

501 posts

Ultimate Geek
+1 received by user: 49

#1097355 28-Jul-2014 18:55

In Download Mode I get:

ODIN MODE
Product Name: GT-I9505
Current Binary: Custom
System Status: Custom
CSB-CONFIG-LSB: 0x30
Write Protection: Enable

RS820+, DS223, CoreELEC on Odroid N2+, 3 x Echo Dot & 7 x Google Homes connected to Home Assistant on Beelink SEi12.

xbmcnut

501 posts

Ultimate Geek
+1 received by user: 49

#1098433 30-Jul-2014 10:24

I've bitten the bullet and upgraded to stock 4.4.2 with Knox and then reinstalled CM11 M8. Everything working again now. Thanks for all the advice.

RS820+, DS223, CoreELEC on Odroid N2+, 3 x Echo Dot & 7 x Google Homes connected to Home Assistant on Beelink SEi12.