Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


keeweechris

4 posts

Wannabe Geek


#116670 6-May-2013 16:42
Send private message

Hello, i'm new here but found this brilliant forum whilst searching for an answer.

I am trying to get an EPG working on WMC 7. I have tried downloading EPG centre but this doesn't work. When I open EPG Centre the log shows a couple of errors Configeration incorrect and then Exiting with code =2. Then when I tried to select the 'Create collection parameters' i get this dialogue box appear.

Unhandled exception has occurred in your application....

Could not finda part of the pathC:\Users\Wheatleys\Downloads\EPGCollector v4.1 fixpak 9 \samples\Collector\

Is anyone able to help me with a fix for this? All I have done is downloaded the program from sourceforge then extracted all the files and run the EPG Centre app.

Thanks,

Chris


Create new topic
freitasm
BDFL - Memuneh
68881 posts

Uber Geek

Administrator
Trusted
Geekzone
Lifetime subscriber

  #812144 6-May-2013 16:45
Send private message

Remove the EPG Collector files from your PC.

Go to this page download and run "EPG Collector V040100 Install.msi".

This will install the EPG Collector.

Then on the same page download "EPG Collector v4.1 Fixpak 9.zip". Extract the contents of the files OVER the existing install created by the previous program (by default c:\program files (x86)\Geekzone\EPG Collector").




 

 

These links are referral codes

 

Geekzone broadband switch | Eletcricity comparison and switch | Hatch investment (NZ$ 10 bonus if NZ$100 deposited within 30 days) | Sharesies | Mighty Ape | Backblaze | Coinbase | TheMarket | My technology disclosure


SJB

SJB
1612 posts

Uber Geek

Trusted
Lifetime subscriber

  #812154 6-May-2013 17:06
Send private message

As described above the fixpacks are updates to the software, not the complete package.

Install the msi and then unzip fixpack 9 over it to apply the updates. Also fixpacks are cumulative so fixpack 9 has all the updates from fixpack 1 thru 8.

 
 
 
 


keeweechris

4 posts

Wannabe Geek


  #812192 6-May-2013 18:15
Send private message

Thats great thanks....... now i've just lost the page with the guide as to what to do next.

turb
821 posts

Ultimate Geek


  #812200 6-May-2013 18:41
Send private message

Is there a way of incorporating the fix pack into the program download? I was also caught out by this rather unusual set up.




Interests: HTPC, Web App authoring. 


keeweechris

4 posts

Wannabe Geek


  #812207 6-May-2013 18:53
Send private message

Glad i'm not the only one that got caught out by it! Does anyone have a link for a step by step guide to getting this all working now? I'm still a little lost and cant find the link that I originally had. Thanks

SJB

SJB
1612 posts

Uber Geek

Trusted
Lifetime subscriber

  #812295 6-May-2013 20:48
Send private message

I have deleted all the old v4.1 fixpacks and added a comment to the beginning of the remaining fixpack ReadMe that makes it clear that you must install the base software before the fixpack.

keeweechris

4 posts

Wannabe Geek


  #813010 7-May-2013 16:38
Send private message

Thanks for your help, finally have an EPG for the first time since moving to NZ!

I'm not quite sure if I have the task scheduler set correctly as I just have it to run the EPG collector.exe will this automatically take it through the process of downloading the new guide data?

Thanks

 
 
 
 


SJB

SJB
1612 posts

Uber Geek

Trusted
Lifetime subscriber

  #813088 7-May-2013 17:42
Send private message

There are some instructions for setting up the task in the ReadMe.

Also if you are importing terrestrial Freeview data directly to WMC you should set the option on the Output tab thats labelled 'Create data for channels with the same name.....' and on the same tab set 'Disable in-band guide loader'.

If you don't set 'Automatically map EPG...' you will need to map the data in WMC. Instructions in the ReadMe.

DarkKnight45
4 posts

Wannabe Geek


  #816157 12-May-2013 13:16
Send private message

Ok Here we go,
 
Allright Got Epg Collector No problems setting it up No problems with the fixpack
everything works right... Here is the Dilemma i am having.

allright NA sat 119 I am trying to use the standalone procedure to get an epg
guide for Dishnet well I am using a dishpro 1000.2 lnb I have no problems locking
the transponder and the Freq for the epg guide.. It even gets the records everything is right
however when it writes the XML file it is empty... The tags are there but it is empty
I have tried it in eit mode and i have tried it in dishnet mode DSSPRO i have tried
the bandstacked method as well.. But it keeps writing an empty xml file with just
tags and no data even though it finds the data.. I have been at this for a week and
I am finally at the point where i am going to be sitting in a corner drooling at any
second... I went as far as to download just the 44hr guide and it still wrote an empty
xml file.... I have been to various websites and still have not found any help on the
matter.... Can someone PLEASE PLEASE Shed some light on this crazy thing before
i blow a gasket heheheh (Joking) but any help would be appreciated

                                     Thanks
                                        Dk

SJB

SJB
1612 posts

Uber Geek

Trusted
Lifetime subscriber

  #816242 12-May-2013 15:42
Send private message

Upload the EPG Collector log file somewhere and post the link.

DarkKnight45
4 posts

Wannabe Geek


  #817491 14-May-2013 16:02
Send private message

Thanks Sjb I appreciate it... Will get it up Shortly Thank you...

                                        Dk

DarkKnight45
4 posts

Wannabe Geek


  #820079 15-May-2013 14:09
Send private message

Hello there Sjb,
    I got it sorted.... It was just a matter of using the bandstack... I feel like an idiot..
Anyways thanks so much.. For the prompt help its appreciated!!

                                                     Dk

SJB

SJB
1612 posts

Uber Geek

Trusted
Lifetime subscriber

  #820193 15-May-2013 16:45
Send private message

Glad its sorted.

Post on Sourceforge with any other problems. Geekzone is primarily NZ users.

DarkKnight45
4 posts

Wannabe Geek


  #820699 16-May-2013 17:27
Send private message


Thank you Sjb. Its appreciated... Wonderful Program you got here..... Very happy

                                    Dark

Create new topic





News »

Huawei launches IdeaHub Pro in New Zealand
Posted 27-Oct-2020 16:41


Southland-based IT specialist providing virtual services worldwide
Posted 27-Oct-2020 15:55


NASA discovers water on sunlit surface of Moon
Posted 27-Oct-2020 08:30


Huawei introduces new features to Petal Search, Maps and Docs
Posted 26-Oct-2020 18:05


Nokia selected by NASA to build first ever cellular network on the Moon
Posted 21-Oct-2020 08:34


Nanoleaf enhances lighting line with launch of Triangles and Mini Triangles
Posted 17-Oct-2020 20:18


Synology unveils DS16211+
Posted 17-Oct-2020 20:12


Ingram Micro introduces FootfallCam to New Zealand channel
Posted 17-Oct-2020 20:06


Dropbox adopts Virtual First working policy
Posted 17-Oct-2020 19:47


OPPO announces Reno4 Series 5G line-up in NZ
Posted 16-Oct-2020 08:52


Microsoft Highway to a Hundred expands to Asia Pacific
Posted 14-Oct-2020 09:34


Spark turns on 5G in Auckland
Posted 14-Oct-2020 09:29


AMD Launches AMD Ryzen 5000 Series Desktop Processors
Posted 9-Oct-2020 10:13


Teletrac Navman launches integrated multi-camera solution for transport and logistics industry
Posted 8-Oct-2020 10:57


Farmside hits 10,000 RBI customers
Posted 7-Oct-2020 15:32









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.