Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


neb

neb

11294 posts

Uber Geek

Trusted
Lifetime subscriber

#268049 25-Feb-2020 15:03
Send private message

There's a couple of sumps at the bottom of the section with black iron grates over them, just cast iron with black paint. Some of the paint has flaked off and the grates are busy rusting away underneath. In terms of addressing this, I was wondering what's best, wire brush + black zinc or rust converter + something. In other words should I remove as much of the rust as possible and start again with black zinc, or try and stabilise it and maybe use black zinc on that?

Create new topic

mdf

mdf
3523 posts

Uber Geek

Trusted

  #2427009 25-Feb-2020 17:35
Send private message

Best is the CRC oxidising rust converter, then the primer, then top coat. Rustoleum is good at priming and top coating itself. Whether you can be bothered with the extra steps for a grate though...?

 

FWIW, I've had the CRC spray and the paint on stuff. Paint on stuff works way better IME, though obviously is more hassle to apply.




Gurezaemon
~HONYAKKER!~
1356 posts

Uber Geek

ID Verified
Lifetime subscriber

  #2427106 25-Feb-2020 19:29
Send private message

mdf:

 

Best is the CRC oxidising rust converter, then the primer, then top coat. Rustoleum is good at priming and top coating itself. Whether you can be bothered with the extra steps for a grate though...?

 

FWIW, I've had the CRC spray and the paint on stuff. Paint on stuff works way better IME, though obviously is more hassle to apply.

 

 

The spray stuff is so convenient, and saved me a ton of time when fixing the roof, but it clogged the nozzle within a couple of minutes of use unless you do the "hold upside down and clear" regularly. I now have a couple of half-empty cans that I can't use, and I'm wondering how to get the contents out so I can use them without an explosion happening...


neb

neb

11294 posts

Uber Geek

Trusted
Lifetime subscriber

  #2427150 25-Feb-2020 23:13
Send private message

I've got a bottle of the CRC rust converter so I'll go with that rather than the wire brush approach, definitely prefer paint-on because you have precise control over where it goes and can e.g. dab it into particularly bad areas. Reason for doing it is that some of the grates are in high-ish traffic areas and having rusting blistered grates over the drains doesn't look too good, but rust converter and top coat sounds fine.

Create new topic





News and reviews »

Gen Threat Report Reveals Rise in Crypto, Sextortion and Tech Support Scams
Posted 7-Aug-2025 13:09


Logitech G and McLaren Racing Sign New, Expanded Multi-Year Partnership
Posted 7-Aug-2025 13:00


A Third of New Zealanders Fall for Online Scams Says Trend Micro
Posted 7-Aug-2025 12:43


OPPO Releases Its Most Stylish and Compact Smartwatch Yet, the Watch X2 Mini.
Posted 7-Aug-2025 12:37


Epson Launches New High-End EH-LS9000B Home Theatre Laser Projector
Posted 7-Aug-2025 12:34


Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.