Bathroom Tap Replacement

Forums › Home Workshop DIY › Bathroom Tap Replacement

Goosey

2830 posts

Uber Geek

Subscriber

#295407 27-Mar-2022 09:52

Hi,

I think my taps are beyond "re-seating"... (see photos)

We have a 3 hole basin but only two are used (the centre is a handwash dispenser to which we dont use because its too old / doesnt pump well)

Thinking about replacing them with these or similar...will it be suitable? (im not good a plumbing) :-)

https://www.mitre10.co.nz/shop/foreno-basin-mixer-chrome/p/158547

Bathroom 1

Bathroom 2

Kickinbac

427 posts

Ultimate Geek

#2892652 27-Mar-2022 10:06

These usually have a manifold that needs to be trimmed to suit the spacing between taps and spout. It will be a very difficult job up in behind the basin. This is one of those jobs to pay a plumber to do if your not confident with your skills.

https://foreno.co.nz/wp-content/uploads/instructions/LT450_Instructions.pdf

Bung

6482 posts

Uber Geek

Subscriber

#2892654 27-Mar-2022 10:14

What's your water pressure like? Mixers can have problems that don't occur with separate taps if the cold can overpower the hot supply.

Goosey

2830 posts

Uber Geek

Subscriber

#2892655 27-Mar-2022 10:21

Hey

Intention is to use the plumber !
Just need to sort the hardware (or get them to suss it given there’s a lot of stock issues).

Pressure…. I believe unequal. I.e. turn on hot….. then turn on cold and the pressure drops slightly.

Recently the level of chorline has been dramatically reduced as local pump stations have been upgraded with well heads brought above ground…. With this work completed our overall pressure has increased too

Overall… if I can do the donkey work for the prospective plumber (yet to book one), it’s a win win….time and cash!

lchiu7

6476 posts

Uber Geek

Trusted

#2894562 31-Mar-2022 09:29

Just my two cents but if it were my bathroom I would just replace the two taps with two new ones and forget about a mixer so the issue of pressure differences does not come into play.

Then fill the middle hole with something like this

https://www.amazon.com/Kitchen-Dispenser-Brushed-GAPPO-Countertop/dp/B07PVY9W66

Staying in Wellington. Check out my AirBnB in the Wellington CBD. https://www.airbnb.co.nz/h/wellycbd PM me and mention GZ to get a 15% discount and no AirBnB charges.

Handsomedan

7292 posts

Uber Geek

ID Verified

Trusted

Subscriber

#2894577 31-Mar-2022 10:06

We were going to replace a similar setup with almost identical taps to what you linked.

It was a bit harder than I thought it'd be and was well beyond my abilities - so calling a plumber after procrastinating for about 12 months, it turns out the taps aren't compatible without serious modification - we are going to do a whole bathroom instead (everything needs replacing anyway).

My advice - get the plumber in first - then get the tapware.

Handsome Dan Has Spoken.
Handsome Dan needs to stop adding three dots to every sentence...

Handsome Dan does not currently have a side hustle as the mascot for Yale

*Gladly accepting donations...

lchiu7

6476 posts

Uber Geek

Trusted

#2894583 31-Mar-2022 10:31

If you are really going to do it yourself get ones of these

https://nz.rs-online.com/web/p/plumbing-tools/0519810?cm_mmc=%CE%9D%CE%96-PPC-DS3A-_-google-_-DSA_NZ_EN_Hand+Tools_Index-_-Specialist+Tools%7C+Products-_-DYNAMIC+SEARCH+ADS&matchtype=&dsa-1252083179236&gclid=Cj0KCQjw_4-SBhCgARIsAAlegrX5bEzonCyaVtfyLtXNag_ABFLtI3ydCWdELd8f6NwqQgxrHknZPCUaAvL4EALw_wcB&gclsrc=aw.ds

I had a plumber around recently to replace taps very similar to what the OP has (I used an existing tap I had removed from another sink so it was the same style) and he was surprised I had one of these lying around which saved him having to go back to his truck and find his one :-)

But agree - better to get a plumber and avoid all these hassles.

Staying in Wellington. Check out my AirBnB in the Wellington CBD. https://www.airbnb.co.nz/h/wellycbd PM me and mention GZ to get a 15% discount and no AirBnB charges.

insane

3239 posts

Uber Geek

ID Verified

Trusted

#2894601 31-Mar-2022 11:23

lchiu7:

If you are really going to do it yourself get ones of these

https://nz.rs-online.com/web/p/plumbing-tools/0519810?cm_mmc=%CE%9D%CE%96-PPC-DS3A-_-google-_-DSA_NZ_EN_Hand+Tools_Index-_-Specialist+Tools%7C+Products-_-DYNAMIC+SEARCH+ADS&matchtype=&dsa-1252083179236&gclid=Cj0KCQjw_4-SBhCgARIsAAlegrX5bEzonCyaVtfyLtXNag_ABFLtI3ydCWdELd8f6NwqQgxrHknZPCUaAvL4EALw_wcB&gclsrc=aw.ds

....

Yes! My old man pulled out one of these to make a nearly impossible looking job look moderately easy.

Lenovo

Shop now for Lenovo laptops and other devices (affiliate link).

Goosey

2830 posts

Uber Geek

Subscriber

#2896919 4-Apr-2022 19:14

Thanks all.

All good oil.

I’ve got the spec sheet for the set I’m keen on…
Just need to see if it will work before ordering them then engaging the plumber!