8/32 or 8-32 Pan Head Machine Screws

Forums › Home Workshop DIY › 8/32 or 8-32 Pan Head Machine Screws

1 | 2 | 3

13684 posts

Uber Geek
+1 received by user: 10018

#2152152 30-Dec-2018 10:56

Mitre 10 have a very poor range of anything other than metric. Blacks Fasteners in Chch should have what you need. Closed today - open tomorrow (31).

gedc

355 posts

Ultimate Geek
+1 received by user: 11

#2152207 30-Dec-2018 13:01

Cheers for the help. Will give them a buzz tomorrow

irongarment

280 posts

Ultimate Geek
+1 received by user: 134
Inactive user

#2152216 30-Dec-2018 13:17

I can also recommend Konnect. Their main store is in Addington, but they have a small store in town, opposite South City Mall. If they don't have what you want there they can look it up and tell you if the main store has it.

mdf

3566 posts

Uber Geek
+1 received by user: 1519

Trusted

#2152236 30-Dec-2018 14:03

FWIW (very little in these circumstances) Coastal Fasteners in Wellington are really good for this sort of thing. Might help someone stumbling over this thread later.

mdf

3566 posts

Uber Geek
+1 received by user: 1519

Trusted

#2152285 30-Dec-2018 15:18

gedc:

This is what I've got

https://www.microjig.com/products/zeroplay

Not a lot of brass left to drill out and retap and I'd rather just find the correct machine screws cheers

Off topic, but these are adjustable guide bars for mitre slots? Pretty cool if they work. Would be interested in a review/your thoughts once you've found the screws you need.

k1w1k1d

1712 posts

Uber Geek
+1 received by user: 1311

#2152317 30-Dec-2018 16:00

I would also be interested in how you get on with these bars.

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

neb

11294 posts

Uber Geek
+1 received by user: 10018

Trusted

Lifetime subscriber

#2152331 30-Dec-2018 16:44

gedc:
Yeah. Ive been reading up on SAE, Imperial, UNC and Metric. Still none the wiser other than manufacturers / retailers here seem to mix them up :)

I have some 13/275th ell screws with the thread pitch at 29/456ths of a perch, diameter 1/5723th of a furlong, if anyone can use them.

It's a wonder anything in the US can get built at all with the bizarro set of units they have to work with, usually divided into equally strange fractions just to get something useful.

mdf

3566 posts

Uber Geek
+1 received by user: 1519

Trusted

#2152334 30-Dec-2018 17:05

neb:
gedc:

Yeah. Ive been reading up on SAE, Imperial, UNC and Metric. Still none the wiser other than manufacturers / retailers here seem to mix them up :)

I have some 13/275th ell screws with the thread pitch at 29/456ths of a perch, diameter 1/5723th of a furlong, if anyone can use them. It's a wonder anything in the US can get built at all with the bizarro set of units they have to work with, usually divided into equally strange fractions just to get something useful.

Yes, indeed:

Edit: Guldemmit. External links.

gedc

355 posts

Ultimate Geek
+1 received by user: 11

#2152392 30-Dec-2018 20:39

Just got an email back from Blacks Fasteners saying they don't stock them as ex USA. Just an FYI. Will follow up with a few others and let the masses know and will PM the folks that are interested in a short review of the microjigs

Zippity

683 posts

Ultimate Geek
+1 received by user: 132

#2153943 3-Jan-2019 16:19

Take one with you and go visit Anzor Fasteners

gedc

355 posts

Ultimate Geek
+1 received by user: 11

#2153955 3-Jan-2019 16:39

Yep. Thanks for that. They were my last hope but were closed over the holidays. Pretty much all of the others have now replied to say they don't stock that thread / size. Not sure how much Anzor will want per screw given they are 304 stainless by the looks of things.

Cheers

Dyson

Shop now for Dyson appliances (affiliate link).

irongarment

280 posts

Ultimate Geek
+1 received by user: 134
Inactive user

#2154020 3-Jan-2019 17:21

Try asking for a couple of 'samples'.

Zippity

683 posts

Ultimate Geek
+1 received by user: 132

#2154029 3-Jan-2019 17:34

gedc:

Yep. Thanks for that. They were my last hope but were closed over the holidays. Pretty much all of the others have now replied to say they don't stock that thread / size. Not sure how much Anzor will want per screw given they are 304 stainless by the looks of things.

Cheers

If their Wellington Branch is anything to go by, they won't cost you an arm and a leg.

Good luck

k1w1k1d

1712 posts

Uber Geek
+1 received by user: 1311

#2154040 3-Jan-2019 17:56

https://www.anzor.co.nz/832unc-x-1-304-pan-slot-mscrew

Above looks hopeful.

gedc

355 posts

Ultimate Geek
+1 received by user: 11

#2154070 3-Jan-2019 19:18

Yep. Looks perfect from what I can see. Given I will likely have a few of these jigs I may as well buy a big handful when I can get them.

1 | 2 | 3