Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 
RickW
302 posts

Ultimate Geek
+1 received by user: 57


  #2524291 16-Jul-2020 18:51
Send private message

I own a roofing company and a realistic figure would be $5000-5500 for a fixed skylight to be installed including a builder for the framing, a plasterer for the gib and a painter. This is assuming the roof structure didn’t need to be altered. I don’t and most other roofers don’t rate the velux flashing kits because they are a thinner gauge steel and are generally harder to install as well.



D1023319
527 posts

Ultimate Geek
+1 received by user: 90

ID Verified

  #2524489 17-Jul-2020 07:19
Send private message

Out of interest - we needed a skylight in our old bungalow hall but had no $$$

 

As it was roofed in traditional corrugated iron sheets, we:

 

- pulled a few sheets out

 

- whacked a hole in the sarking

 

- framed the hole with 100*50

 

- replaced corrugated iron sheets with equivalent clear sheets

 

- whacked hole in hallway roof

 

- framed hole in hall roof to hold sheet of obscure glass.

 

All sorted with no flashings required.

 

 

 

We were going to line the gap between the skylight and hall roof hole to increase light but wasn't needed and it provided light for the attic

 

 

 

 

 

 


TLD

TLD
908 posts

Ultimate Geek
+1 received by user: 263


  #2524907 17-Jul-2020 18:36
Send private message

eracode:

 

mentalinc:

 

Have you considered something like a solartube instead?

 

https://www.hometech.co.nz/contact

 

should be much lower entry point in terms of costs!

 

 

 

 

We had two Solartubes installed in a new home when we moved in five years ago - a large one in upstairs en-suite and the smaller version in the walk-in wardrobe. I’m biased because we have them but honestly they’re fantastic and money well-spent IMO. The reason we installed the smaller one is because the rafters/trusses positions did not easily allow a second large one.

 

One thing we have found interesting is that on any night when at least a half-moon is visible overhead, there’s enough light in the bathroom to not need to turn the light on if you need to go in there in the middle of the night.

 

 

I was going to suggest solatubes.  We had a ton of work done a couple years ago, and the two solatubes are one of our favourite changes.  They are incredibly bright, and spread the light well, and I am all but certain they would be way cheaper than a skylight.  One man installed both of ours in half a day.  A 290DS and a 160DS and they cost us $3149.  It's like free power, and one of the best things we ever did here.





Trevor Dennis
Rapaura (near Blenheim)




gzt

gzt
18685 posts

Uber Geek
+1 received by user: 7826

Lifetime subscriber

  #2524929 17-Jul-2020 19:02
Send private message

Skylights tend to introduce an additional condensation surface and thermal drafts even when double glazed. Tradeoff.

blackjack17
1713 posts

Uber Geek
+1 received by user: 865


  #2524978 17-Jul-2020 20:46
Send private message

Was just out at my parents and had a look at their skylight.

 

 

 

It has only been in (finished) for a year or so and you can see the condensation stains on the gib.  The window is fine it is the condensation forming in the cavity and condensing on the gib and running down causing water marks.  This is in an office, in a bathroom it would be way worse.





bfginger
1330 posts

Uber Geek
+1 received by user: 191


  #2551505 28-Aug-2020 17:59
Send private message

gzt: Skylights tend to introduce an additional condensation surface and thermal drafts even when double glazed. Tradeoff.

 

The building code only has minimal thermal requirements of skylights. They should have a thermally broken frame and good low e like Metroglass XCel, Xtreme or Viridian PerformaTech 206.


1 | 2 
View this topic in a long page with up to 500 replies per page Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.