cant get epg data from Kopukairua?

Forums › Home Theatre (including HTPC and EPG Collector) › cant get epg data from Kopukairua?

floydie

474 posts

Ultimate Geek

#146809 29-May-2014 17:04

trying to get epg collector to work and cant even get past the first stage. :( i have the aerial vertically aligned to kopu kairua but when i scan it gets no data/signal....

what frequency should i be scanning at? ive selected mheg5 and kopukairua 2012+ but no data...

i suspect that there are a few joins in the aerial cable in the roof. reception is ok but maybe not enough for EPG?

any tricks to getting data from kopukairua?

floydie

474 posts

Ultimate Geek

#1056624 30-May-2014 16:18

no one?

when scanning it comes up with signal not locked and strength not > 0

any suggestions??

andrewNZ

2487 posts

Uber Geek
Inactive user

#1056660 30-May-2014 17:25

You want to scan any one of the following frequencies (Scanning more than one is not necessary).

570 MHz
586 MHz
602 MHz

floydie

474 posts

Ultimate Geek

#1056681 30-May-2014 17:56

thanks..the other issues...
1)how do i do the fix patches? the guide says things like "run the installer" and extract it...but there is no installer file?
2)also the window that EPG collector opens in to set up the collector parameters isnt big enough and i cant actually select the "selected scanning frequencies" so i cant delete the auckland one in favour of the kopukairua one...how the hell do i change that?

how do i get the output to be be recognised by MCE? what the heck is an MXF file and where is it...any guides for total newbs..ive been feckin around with this for 4 hours now with no success.
sorry for the stupid questions but the instructions simply dont match the reality of what is actually showing up....

floydie

474 posts

Ultimate Geek

#1056706 30-May-2014 18:42

heres what i'm seeing....
as you can see the bar at the side is hard down but i cant get access to the box...what the ****?

andrewNZ

2487 posts

Uber Geek
Inactive user

#1056780 30-May-2014 19:18

floydie: heres what i'm seeing....
as you can see the bar at the side is hard down but i cant get access to the box...what the ****?

If I had to guess, I'd say you've got the display set to 125 or 150%.

Go to Control panel, select display, and set it to 100%.

I imagine that things will become a lot clearer once you fix that.