Ir extension for freeview stb

Forums › Home Theatre (including HTPC and EPG Collector) › Ir extension for freeview stb

33coupe

1025 posts

Uber Geek
+1 received by user: 75

ID Verified

#175352 25-Jun-2015 20:44

To make a long story short my homecast 9200 Freeview box is in a cabinet, so my remote doesn't work.

On the back of the box there is a 3.5mm ir sensor port.

I bought one of these but I'm assuming it doesn't work because it's an emitter and not a receiver. Is that correct?

http://www.jaycar.co.nz/Sight-%26-Sound---Home/Universal-Remotes-%26-IR-Extenders/IR-Extenders/Single-IR-Emitter-for-AR-1812-14/p/AR1811

I've done quite a bit of searching but still none the wiser.

Can anyone point me to a cheap solution?

Thanks

JonnyCam

644 posts

Ultimate Geek
+1 received by user: 52

ID Verified

#1331970 26-Jun-2015 11:15

If you can solder, then get one of these and wire up. (I've done this before)

http://www.jaycar.co.nz/Active-Components/Optoelectronics/Optocouplers/5mm-Infrared-Receiver/p/ZD1952

Check what pins have 5v on it from the 3.5mm jack from the stb.

Or see if Jaycar will let you get one of these, and allow to return if it doesnt work: (not what I call cheap, but nicer looking)

http://www.jaycar.co.nz/Sight-%26-Sound---Home/Universal-Remotes-%26-IR-Extenders/IR-Extenders/Spare-IR-Receiver-for-Cat-5-Baluns/p/AR1819

trig42

5889 posts

Uber Geek
+1 received by user: 2094

ID Verified

#1331973 26-Jun-2015 11:21

Or, get one of these:
http://www.logitech.com/en-nz/product/harmony-smart-control?crid=60

or go the whole hog and get the Ultimate.

Once you go Harmony, you will never go back :)

ben28

196 posts

Master Geek
+1 received by user: 89

#1331983 26-Jun-2015 11:33

Here is what I use, may be an option
IRSENDKIT1 IR EXTENDER KIT
which has since been superseded
by
http://www.tradetech.co.nz/shop/Outdoor+Aerials+%26+Accessories/Remote+Extenders/IRSENDKIT3.html I believe. Works great and its all cable .
Use with an older mysky ,non hd box. So cant confirm it will work with an HD unit, but ask the supplier

33coupe

1025 posts

Uber Geek
+1 received by user: 75

ID Verified

#1332257 26-Jun-2015 16:38

Thanks for the replies.

I exchanged the emitter for the receiver as per JonnyCam's post but it still doesn't work (not sure why tho).

I can't afford anything more expensive so it looks like I'll have to open my cabinet door every time. Poor me lol.

Thanks tho

richms

29104 posts

Uber Geek
+1 received by user: 10219

Trusted

Lifetime subscriber

#1332260 26-Jun-2015 16:41

Under US$5 delivered - http://www.aliexpress.com/item/2014-New-Arrival-IR-Extender-Infrared-Repeater-Remote-Control-1-Emitter-1-Receiver-USB-Adatper-7/1950360025.html

Richard rich.ms

33coupe

1025 posts

Uber Geek
+1 received by user: 75

ID Verified

#1332271 26-Jun-2015 17:10

Thanks for that. What's with the usb bit?

Samsung

Shop now on Samsung phones, tablets, TVs and more (affiliate link).

richms

29104 posts

Uber Geek
+1 received by user: 10219

Trusted

Lifetime subscriber

#1332273 26-Jun-2015 17:13

To power it.

I've only bought the slightly more expensive multi head one. It works ok. Too much light on the sensor part will jam it somewhat. But on the wall under the TV and it's sweet as.

Richard rich.ms

33coupe

1025 posts

Uber Geek
+1 received by user: 75

ID Verified

#1332279 26-Jun-2015 17:42

Ah thanks.

At that price it's worth a shot!

Looks like I'm going back to JayCar again. They wont be happy lol.

Cheers

33coupe

1025 posts

Uber Geek
+1 received by user: 75

ID Verified

#1346773 18-Jul-2015 14:49

richms: To power it.

I've only bought the slightly more expensive multi head one. It works ok. Too much light on the sensor part will jam it somewhat. But on the wall under the TV and it's sweet as.

Just a quick thanks to richms for the recommendation. The Ir receiver works really well, and it was really cheap!

Cheers