Skinny B618S doesn't support 5GHz WiFi?

Forums › Spark New Zealand (including Skinny and BigPipe) › Skinny B618S doesn't support 5GHz WiFi?

1 | 2

wratterus

1687 posts

Uber Geek

#2452216 1-Apr-2020 12:04

116 pretty sure is a DFS channel. Hard set channel 36 or 149 (assuming you are using 80MHz width). If you are using 40MHz width, then you can choose 36 , 44, 149, or 157

Change the SSID/password to what you want, then leave it alone for 5 mins and see if it starts behaving normally.

siyuan

189 posts

Master Geek

Lifetime subscriber

#2452227 1-Apr-2020 12:13

wratterus:

116 pretty sure is a DFS channel. Hard set channel 36 or 149 (assuming you are using 80MHz width). If you are using 40MHz width, then you can choose 36 , 44, 149, or 157

Change the SSID/password to what you want, then leave it alone for 5 mins and see if it starts behaving normally.

Thanks heaps! You are right, setting the channel to 149 manually, it starts working immediately.

wratterus

1687 posts

Uber Geek

#2452238 1-Apr-2020 12:23

Easy. No worries. I didn't realize those modems actually broadcast on DFS channels or would have thought of that right away.

@snnet is this your issue too possibly?

snnet

1410 posts

Uber Geek

#2452273 1-Apr-2020 13:31

wratterus:

Easy. No worries. I didn't realize those modems actually broadcast on DFS channels or would have thought of that right away.

@snnet is this your issue too possibly?

Very possibly, I did just reboot it as it got a little sluggish and the 5GHz band wasn't broadcasting again - however a Hidden Network appeared, I specified the SSID for the 5G band and it connected that way on my windows 10 laptop

I will try that configuration of locking down

Don't know why I didn't play with those settings before, I install APs as part of my job lol. I just figured glitch I guess

@hio77 you can look at my config if you want, but be gentle 🤣

1 | 2