[WXC/VFX] Pap2p

Forums › One New Zealand (including Vodafone, WxC, Farmside) › [WXC/VFX] Pap2p

ninjabear

460 posts

Ultimate Geek
Inactive user

#16890 2-Nov-2007 11:51

I see that from the linksys.com website the latest firmware is 5.15

I think Im running 3.15

If I upgrade it would it cause any problem?

coffeebaron

6231 posts

Uber Geek

Trusted

Lifetime subscriber

#93467 2-Nov-2007 13:40

Open the web browser to check your firmware. Should be up top of main page, and mine is 5.15. So upgrading to this version should not be a problem. Normally the VFX config should check this and update the firmware automatically. If it hasn't, factory reset it, then drop the default VFX config line back in, see if it updates firmware then.

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

maverick

3594 posts

Uber Geek

Trusted

WorldxChange

#93585 3-Nov-2007 11:05

I think you will find the device you have is one of the PAP2's not the PAP2T, most probably yes it would cause a problem as the 5.1.x firmwrae train is for the latest hardware the PAP2 is quite old now and ther will not be to much firmware support for it from Linksys,

You proberly were one of the first ones to get on the system with the PAP2 as we don't support them anymore due to a couple of issues, there is 3.1.22ls code which is the latest but if you are not having issues then proberly best advised to stay on the one you have.

Are you having some issues or you just looking to upgrade ?

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications

ninjabear

460 posts

Ultimate Geek
Inactive user

#93609 3-Nov-2007 19:10

Hello

It was a typo error.I have a pap2t and using it right now

Hooked it up yesterday and called the other day before to provide the mac address

Everything is working fine and I suppose with call forwarding you cannot choose a cellphone number to call forward only a landline number correct?

I am waiting patiently to get rid of my telecom line

maverick

3594 posts

Uber Geek

Trusted

WorldxChange

#93617 3-Nov-2007 20:17

you can call forward to any number you like on your VFX line...on your Pap2t it should be running the latest firmware, if you PM your details I will checjk it out

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications

ninjabear

460 posts

Ultimate Geek
Inactive user

#93619 3-Nov-2007 21:00

I checked just now I must've been falling asleep last nite it is firmware 5.15

ninjabear

460 posts

Ultimate Geek
Inactive user

#93620 3-Nov-2007 21:03

Under the features guide It means how to do 3 way call you press the flash hook

I don't know which button is that?

ninjabear

460 posts

Ultimate Geek
Inactive user

#93621 3-Nov-2007 21:13

I have another question

I just changed the call forwarding number to my mobile and noticed that when my mobile rings it displayed private number

I don't think its to do with vodafone and I am using a nokia n73

By any chance or is there something that can enable the caller ID?

So if someone calls my vfx number and it goes to my mobile number it will either display my vfx number on my mobile or the person who actually made the call

is this impossible?

Oh one more question

Your website indicated Call Notify

I think that what this is is that if someone calls and noone answers you can xnet to send you an email on the person who called and the date and time that the call was made however under the feature guide on the website it does not say how to set this up

This is a free feature am i correct?

Samsung

Shop now on Samsung phones, tablets, TVs and more (affiliate link).

maverick

3594 posts

Uber Geek

Trusted

WorldxChange

#93642 4-Nov-2007 09:15

On call forwarding the Caller ID of the person who called (If available) will be displayed,

Call Notify is one of the features you have with your VFX connection, all the services that are in your Web Portal are part of the package so free to use as you see fit

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications