[WXC/VFX] Setting up VFX on a WRTP54G (provisioning help)

Forums › One New Zealand (including Vodafone, WxC, Farmside) › [WXC/VFX] Setting up VFX on a WRTP54G (provisioning help)

conork

31 posts

Geek

#19326 12-Feb-2008 21:31

hi ppl,

Have set up my linksys wrtp54g router which is conected to my telstra clear cable modem. its all up and running sweet.
However have just signed up to vfx and they have sent me my provisioning email thing with all the details but i cant seem to find the section on the routers gui to put in the link that they have given me.
I would ring them but they are closed now.

any help would be greatly appriciated

Cheers
Conor

bsd

43 posts

Geek

#110240 12-Feb-2008 22:16

Hi there,

Found that very confusing to start with as well.

If you login to the device (using it's IP address, by default 192.168.15.1 I think) and click on Voice you should be able to find it there, under Provisioning.

My device had already blocked access to this section and as far as I know if this is the case you don't need to add the link?

Niel

3267 posts

Uber Geek

Trusted

#110245 12-Feb-2008 22:18

Is it preconfigured (had a VFX sticker on the box)? Then it is already configured and no need to enter anything. Check if the phone port is working. Once it has connected to the server you will not be able to get to the settings until one day if you leave VFX and request the device to be unlocked (they will do it for you).

You can never have enough Volvos!

ekiwi

13 posts

Geek

#110295 13-Feb-2008 00:20

I set one up the other day and off the top of my head

once in voice

there are 2 things you need to click on that are not immediatly obvious

advanced and then admin login (or it might be the other way round the order is important) found as links at the top of the screen

once you do these the provisioning menu will appear

but as other posters have mentioned if it has vfx,xnet written all over the box then it has probably already been done, and you will be locked out of some areas

-ekiwi

maverick

3594 posts

Uber Geek

Trusted

WorldxChange

#110308 13-Feb-2008 06:46

The unit is fine,I have taken a look at this this morning we have your unit listed as a WAG54GP2 not a WRTP54G, this will be fixed this morning and a profile for your wrtp54g will be added instead of a wag54gp2, your device is phoning home so should all be good shortly

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications

maverick

3594 posts

Uber Geek

Trusted

WorldxChange

#110312 13-Feb-2008 07:53

Correct profile added, your device has picked it up updated it's firmware and has now registerd, so you should now have a Phone LED on as well as dial tone.....welcome to WorldxChange & VFX

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications

conork

31 posts

Geek

#110467 13-Feb-2008 19:00

hi everyone,

yeah found out didnt need to put anything in the provisioning part as its already preconfigured out of the box. So thanks for help.
Cheers Maverick your the man its all up and going now

loving the forum so helpful

conor