2talk > pap2t - caller id stopped working

Forums › VoIP › 2talk > pap2t - caller id stopped working

1 | 2

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#2127782 16-Nov-2018 09:31

Just remember ONT voice will only be available for $5 when bundled with their broadband (most UFB plans include the ONT port as part of the wholesale price). The use of the ONT port as a voice only offering when disconnected from the RSP costs a lot more.

choccers

64 posts

Master Geek
+1 received by user: 2

#2132658 23-Nov-2018 12:58

Well my setup at home is FritzBox, FritzFon and 2 x yealinks. No ATA's involved. Phone calls work fine. Voicemail works fine.

Just the text messaging has disappeared. I get nothing on any of my mobile phones or either of my mobile numbers. I have friends who have tried and they get no reply and I get no messages from them.

Spark to spark number works just fine. Stock vodafone iPhone message app to 2talk - nothing. Stock android message app to 2talk and back again nothing.

Grrrrr

ex cat herder

speed

296 posts

Ultimate Geek
+1 received by user: 101

#2132682 23-Nov-2018 13:13

choccers:

<snip>

Just the text messaging has disappeared.

<snip>

Grrrrr

I think maybe you replied in the wrong thread?

choccers

64 posts

Master Geek
+1 received by user: 2

#2132705 23-Nov-2018 13:48

I think you might be right

ex cat herder

Tockly

353 posts

Ultimate Geek
+1 received by user: 88

#2155942 7-Jan-2019 17:58

Hey there,

Did you resolve this issue?

I have noticed the same since around the same time as you, but I am using a SPA112.

I have updated the firmware, factory reset and reloaded the config, rebooted both the SPA and the attached phones.

We have also noticed that the calls seems to ring for a very short amount of time before dropping into VMail, sometimes only one ring!! Hard to answer when it's that quick!! In fact in a test I just did a call from my cellphone went to voicemail even before the phone in the house had rung!!

I have contacted 2Talk and been told it's all my problem, reboot, factory reset etc etc... Very helpful! All of which I had told them I had already done in the call I logged!!

My gear:

Cisco SPA112 - Firmware 1.4.1SR1 (002) Aug 2 2017 - Connected to a 1Gbps switch direct attached to the router.

Panasonic Cordless handsets - Have tried corded with similar results.

1Gbps UFB via Bigpipe running a Ubiquiti Edgerouter Lite - firmware v1.10.7 (I see there's a new version out which I'll apply after this is sorted)

All this has been running fine for years, but around the similar time as the OP I have been having issues.

Any suggestions?

davidcole

6099 posts

Uber Geek
+1 received by user: 1465

Trusted

#2155965 7-Jan-2019 19:45

I switched to a yeastar ta100 ata. If nothing else so that I could access newer firmware.

It’s been fine ever since.

Previously known as psycik

Home Assistant: Gigabyte AMD A8 Brix, Home Assistant with Aeotech ZWave Controller, Raspberry PI, Wemos D1 Mini, Zwave, Shelly Humidity and Temperature sensors
Media:Chromecast v2, ATV4 4k, ATV4, HDHomeRun Dual
Server Host Plex Server 3x3TB, 4x4TB using MergerFS, Samsung 850 evo 512 GB SSD, Proxmox Server with 1xW10, 2xUbuntu 22.04 LTS, Backblaze Backups, usenetprime.com fastmail.com Sharesies Trakt.TV Sharesight

1 | 2