|
|
Administrator
ID Verified
Trusted
Geekzone
Lifetime subscriber
Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies
Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.
Lifetime subscriber
ID Verified Trusted Lifetime subscriber
Tinkerisk:
Captain‘s breakfast when the lady is still on duty … 😇
Before …
… and 30 minutes later. The weekly Whisky is still there for 0900 UTC (hence the „dust-cover“). The marvelous sunday morning jazz stream as well. 😎
Which airline is that?
Sometimes I just sit and think. Other times I just sit.
Administrator ID Verified Trusted Geekzone Lifetime subscriber
Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies
Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.
Lifetime subscriber
- NET: FTTH & VDSL, OPNsense, 10G backbone, GWN APs
- SRV: 12 RU HA server cluster, 0.1 PB storage on premise
- IoT: thread, zigbee, tasmota, BidCoS, LoRa, WX suite, IR
- 3D: two 3D printers, 3D scanner, CNC router, laser cutter
ID Verified Trusted Lifetime subscriber
Mini salmon casserole with blue cheese
- NET: FTTH & VDSL, OPNsense, 10G backbone, GWN APs
- SRV: 12 RU HA server cluster, 0.1 PB storage on premise
- IoT: thread, zigbee, tasmota, BidCoS, LoRa, WX suite, IR
- 3D: two 3D printers, 3D scanner, CNC router, laser cutter
Indian Masoor Dal
- NET: FTTH & VDSL, OPNsense, 10G backbone, GWN APs
- SRV: 12 RU HA server cluster, 0.1 PB storage on premise
- IoT: thread, zigbee, tasmota, BidCoS, LoRa, WX suite, IR
- 3D: two 3D printers, 3D scanner, CNC router, laser cutter
German plum cake
- NET: FTTH & VDSL, OPNsense, 10G backbone, GWN APs
- SRV: 12 RU HA server cluster, 0.1 PB storage on premise
- IoT: thread, zigbee, tasmota, BidCoS, LoRa, WX suite, IR
- 3D: two 3D printers, 3D scanner, CNC router, laser cutter
Apple pan cake
- NET: FTTH & VDSL, OPNsense, 10G backbone, GWN APs
- SRV: 12 RU HA server cluster, 0.1 PB storage on premise
- IoT: thread, zigbee, tasmota, BidCoS, LoRa, WX suite, IR
- 3D: two 3D printers, 3D scanner, CNC router, laser cutter
„German“ Full English (baked beans separate)
- NET: FTTH & VDSL, OPNsense, 10G backbone, GWN APs
- SRV: 12 RU HA server cluster, 0.1 PB storage on premise
- IoT: thread, zigbee, tasmota, BidCoS, LoRa, WX suite, IR
- 3D: two 3D printers, 3D scanner, CNC router, laser cutter
Rump steak ready prepared for sous-vide
- NET: FTTH & VDSL, OPNsense, 10G backbone, GWN APs
- SRV: 12 RU HA server cluster, 0.1 PB storage on premise
- IoT: thread, zigbee, tasmota, BidCoS, LoRa, WX suite, IR
- 3D: two 3D printers, 3D scanner, CNC router, laser cutter
French blueberry clafoutis
- NET: FTTH & VDSL, OPNsense, 10G backbone, GWN APs
- SRV: 12 RU HA server cluster, 0.1 PB storage on premise
- IoT: thread, zigbee, tasmota, BidCoS, LoRa, WX suite, IR
- 3D: two 3D printers, 3D scanner, CNC router, laser cutter
ID Verified Trusted Lifetime subscriber
So we are back trying to get good pizza made at home.
We have had some failures, but unsurprisingly, last night we discovered that hand stretched pizza bases are considerably better than the ones we roll. The problem being that we aren't good at hand stretching and getting the base thin enough, with no holes in it is proving a challenge.
I also need a reliable way to get the pizza from the bench to the oven, as I have had some pretty horrendous failures, despite it tasting pretty decent. :) I am thinking of a pizza peel. I like the idea of the non-stick ones, but often the oven is over the 200c that is ideal for NonStick.
|
|
|
