|
|
cyril7:
Maybe post some close up photos of the patch panel and a couple of the rear of the wall sockets so we can clearly see the state of the terminations.
Cyril
Port 1 goes from where the ONT is plugged in to the modem "Connection" then port 6 is my PC
I am not in wellington :)
ID Verified Lifetime subscriber
ID Verified
richms: Take the wall socket off and have a look at the workmanship.
Not the OP, but deserves some appreciation... 🤣
ID Verified
Trusted
TEAMnetwork Subscriber
Any views expressed on these forums are my own and don't necessarily reflect those of my employer.
ID Verified Trusted TEAMnetwork Subscriber
aseni:
Not the OP, but deserves some appreciation... 🤣
ummm that is shocking!
Any views expressed on these forums are my own and don't necessarily reflect those of my employer.
here ya go
Bit hard to get a pic of all the wires
Trusted Lifetime subscriber
ID Verified Trusted Lizard Networks Subscriber
#include <std_disclaimer>
Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.
ID Verified Lifetime subscriber
Gordy
My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.
ID Verified Lifetime subscriber
|
|
|
