VDSL speeds have shot up!? Chorus changing to 998 bandplan.

Forums › New Zealand Broadband › VDSL speeds have shot up!? Chorus changing to 998 bandplan.

1 | ... | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | ... | 56

1653 posts

Uber Geek
+1 received by user: 555

#1422997 7-Nov-2015 23:01

TimA:
Mark: Woohoo! Looks like my cabinet just got tweaked :

Not bad for rural :)

And here i am on Ikanos gear..

So am I .. that a good or a bad thing ?

Mark

1653 posts

Uber Geek
+1 received by user: 555

#1422999 7-Nov-2015 23:03

datahawk:
Mark: Woohoo! Looks like my cabinet just got tweaked :

Mark, what were your up/down speeds before the upgrade?

I'm rural also on a near new Whisper cabinet and currently enjoy 57.8/10.3 Mbps on a 17A profile. It will be interesting to see the changes.

It was 42/10 before. So not a huge amount extra on upload but a nice bump for download.

I'm on an 8b profile.

Theclaytons

203 posts

Master Geek
+1 received by user: 26

#1423983 9-Nov-2015 20:36

mercutio:
Theclaytons: My latency has gone from FAST FAST (on the Fritzbox) to 8ms and 1ms for down/up

what's your INP saying?

Sorry for the late response.

INP says 1 and 1

http://www.speedtest.net/result/6594768645.png

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#1424546 10-Nov-2015 17:19

68/11 on 8b really is not bad!

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

velociti1

2 posts

Wannabe Geek

#1424584 10-Nov-2015 18:07

Hi all,

Long time lurker, but had to post.

Just had an upgrade at home in bombay. Was sitting at 45 down 10 up prev

My question is, is there any way I can increase that, given that my attainable is 94 down and im currently at 70 down.

Cheers all.

Jase2985

13735 posts

Uber Geek
+1 received by user: 6217

ID Verified

Lifetime subscriber

#1424592 10-Nov-2015 18:11

@velociti1 nope, nothing you can do, its controlled by the cabinet you are connected to

HP

Shop now for HP laptops and other devices (affiliate link).

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#1424593 10-Nov-2015 18:11

Your profile is very interesting...

As for your speeds however, based off where your capping, i would say your on an ikanos linecard, which is capped at 70/30.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

nigelj

856 posts

Ultimate Geek
+1 received by user: 125

#1424595 10-Nov-2015 18:15

As an observation, is it me or based on the reports, are all these upgrades happening in the middle of the day instead of triggering between 3-6am which is the normal time that DLM is let out to play and make non-urgent adjustments?

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#1424598 10-Nov-2015 18:23

early morning is when movements are made, however most people dont post till the afternoonish.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

velociti1

2 posts

Wannabe Geek

#1424600 10-Nov-2015 18:24

@nigelj - I noticed mine happen early hours of the morning. Was about 5am when mine changed.

So.. just to clarify as I don't understand fully (apologies all) I can only get 70 down. Which hey is like fibre.

But if it was on equipment that limits a certain speed why would it show the attainable as being higher, wouldnt it just be limited to 70.

Jase2985

13735 posts

Uber Geek
+1 received by user: 6217

ID Verified

Lifetime subscriber

#1424601 10-Nov-2015 18:26

mot have had the change over happen at 1am

Lenovo

Shop now for Lenovo laptops and other devices (affiliate link).

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#1424603 10-Nov-2015 18:27

velociti1: @nigelj - I noticed mine happen early hours of the morning. Was about 5am when mine changed.

So.. just to clarify as I don't understand fully (apologies all) I can only get 70 down. Which hey is like fibre.

But if it was on equipment that limits a certain speed why would it show the attainable as being higher, wouldnt it just be limited to 70.

Your attainable, is simply an estimation on an attainable rate. You shouldnt put too much weight on it. - its a calculation your modem is making.

As per the figures above, on that linecard the limitations are fixed at 70/30.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

nigelj

856 posts

Ultimate Geek
+1 received by user: 125

#1424900 11-Nov-2015 02:17

Got woken up from a bad nights rest and noticed a resync.

Old:

> adsl status (or vdsl status)
---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
Running Mode : 8B State : SHOWTIME
DS Actual Rate : 23332000 bps US Actual Rate : 4008000 bps
DS Attainable Rate : 23346432 bps US Attainable Rate : 3730000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 0 US Interleave Depth : 0
NE Current Attenuation : 21 dB Cur SNR Margin : 11 dB
DS actual PSD : 8. 3 dB US actual PSD : 18. 6 dB
NE CRC Count : 0 FE CRC Count : 0
NE ES Count : 0 FE ES Count : 0
Xdsl Reset Times : 0 Xdsl Link Times : 1
ITU Version[0] : b5004946 ITU Version[1] : 544e0000
VDSL Firmware Version : 05-04-08-00-00-06
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 0 dB Far SNR Margin : 11 dB
CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da3f5
DSLAM CHIPSET VENDOR : < BDCM >

Now:

Vigor> vdsl status
---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
Running Mode : 8B State : SHOWTIME
DS Actual Rate : 31756000 bps US Actual Rate : 4204000 bps
DS Attainable Rate : 31776320 bps US Attainable Rate : 4254000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 0 US Interleave Depth : 0
NE Current Attenuation : 22 dB Cur SNR Margin : 9 dB
DS actual PSD : 7. 4 dB US actual PSD : 18. 6 dB
NE CRC Count : 0 FE CRC Count : 0
NE ES Count : 0 FE ES Count : 0
Xdsl Reset Times : 0 Xdsl Link Times : 2
ITU Version[0] : b5004946 ITU Version[1] : 544e0000
VDSL Firmware Version : 05-04-08-00-00-06
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 0 dB Far SNR Margin : 9 dB
CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da3f5
DSLAM CHIPSET VENDOR : < BDCM >

So assuming this is the 998 update (others have said that "Power Management Mode" isn't changing with G998), Downstream is now about 2-4Mbit better than best sync, but my upstream still has taken a beating like Rich's. Makes me wonder if there is some super strange profile or something...

Jase2985

13735 posts

Uber Geek
+1 received by user: 6217

ID Verified

Lifetime subscriber

#1424906 11-Nov-2015 06:21

nigelj: Got woken up from a bad nights rest and noticed a resync.

So assuming this is the 998 update (others have said that "Power Management Mode" isn't changing with G998), Downstream is now about 2-4Mbit better than best sync, but my upstream still has taken a beating like Rich's. Makes me wonder if there is some super strange profile or something...

but your DS is 8mbsp better than the old one and yoru US is still the same or am i missing something

you really need to be able to access the graphs to confirm

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#1425014 11-Nov-2015 09:47

based off a few little changes there, you have jumped over to 998 i would say.

For a originally clearly iffy line, not a bad improvement!

vigor 130 has a Lantiq chipset, paired with a broadcom based chipset would likely juice a little more out of your line however given your broadcom linecard. Differences could be a little to minor to mess with your current setup however.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

1 | ... | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | ... | 56