I have just had UFB installed and at the moment I'm using Spark HG630b Home Gateway. I would prefer to use my Netgear D6300 as it has a higher WiFi speed. Spark HG630b Home Gateway only goes upto Mode n where as the D6300 goes to newer mode of AC.
Spark suggest the following settings for third party gateways.
Operating Mode : MDI/MDIX
PPP Protocol : PPPoE
PPP Username: user@xtrabb.co.nz
PPP Password: telecom1
PPP Auth Type : blank (if you cannot leave blank, select PAP)
Encapsulation : 802.1Q
PCP Marking : 0
VID (or VLAN) : 10
MTU : 1,500 or AUTO
So my question is, does anyone have a D6300 connected to UFB and if so how do you set it up.
You will need to establish whether the device supports VLAN10 tagging on the WAN. If it does you'll simply need to follow the details which you have already posted above.
Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly
to your computer or smartphone by using a feed reader.
Retired Mod
Trusted
Biddle Corp
