What is it you are trying to achieve, there may be other solutions

Cyril

You could use a short network cable then one of these maybe:

https://www.pbtech.co.nz/product/ITPAT-AG6/Dynamix-RJ45-INLINE-JOINER-female-to-female-for-et

Might be an option, thanks.
The problem is that I need the cable to be flush against the wall (it keeps getting knocked and then breaks or stops working); I cannot have anything sticking too far out of the RJ45 socket 

or one like this

https://www.pbtech.co.nz/product/SEVOEM9025/OEM-CE-Link-Cat6-UDP-RJ45-Cable-Right-angle-to-RJ4

If you take the boot or molded section off a patch lead it should turn at right angles with no or little difficulty, alternatively a hand made cable with no boot will achieve the same. I have done this many times with TVs etc that have no or little clearance

Cyril

Thanks bro, that is exactly what I need 😀

Proof that in future I take what the PBTech sales people say with a pinch of salt ...
... I was at the Chch branch on Friday to buy a switch and they told me very emphatically that PBTech does not sell right angled network cables 😠  

Note to self : Ignore whatever sales person says; do your own research 😀