timbosan:

 

richms:

 

many cameras have the ethernet transformer in the blob at the end of the cable, some even have all the POE electronics in there as well and they just swap the cable assemblys over between the POE and non POE models. Check that before chopping it off.

 

Ok - but what I am looking for? Some actual circuitry or just a few resistors, etc.?  I assume I have to split the casing to check.

 

When I did mine, I cut off the bad RJ45 pigtail and did ohmeter tests to make sure I understood which wire was related to which pin and that there were no other interconnections between pins.