No DSL signal on Orcon Geinus

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › No DSL signal on Orcon Geinus

dcole13

534 posts

Ultimate Geek

#152036 13-Sep-2014 20:31

Hi,

Today I was re punching down my DSL keystone, but when I reconnected it, it said there was no signal. I punched it down again and still, no signal. I'm about to try a different router to see if it works then. Any ideas?

Thanks

Home ADSL: School:

Inphinity

2780 posts

Uber Geek

#1128064 13-Sep-2014 20:38

Presumably was fine before you redid the cabling? First thought of course is cabling issue then...

hio77

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#1128065 13-Sep-2014 20:42

Inphinity: Presumably was fine before you redid the cabling? First thought of course is cabling issue then...

This.

unless there is a key bit of information you have missed out, i suspect you got the pairs mixed up or something when punching down.

try again? or you can have TimA come to the rescue ;)

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

dcole13

534 posts

Ultimate Geek

#1128066 13-Sep-2014 20:49

hio77:
Inphinity: Presumably was fine before you redid the cabling? First thought of course is cabling issue then...

This.

unless there is a key bit of information you have missed out, i suspect you got the pairs mixed up or something when punching down.

try again? or you can have TimA come to the rescue ;)

TIIIIIIM. Nah, he will mess up my driveway with his "thrash-mobile"

Home ADSL: School:

dcole13

534 posts

Ultimate Geek

#1128080 13-Sep-2014 21:30

K it works now. Must have been some crappy scotchlok or cable. Also, could someone from orcon send me the orcon firmware for the nf4v?
Thanks

Home ADSL: School:

ubergeeknz

3344 posts

Uber Geek

Trusted

Vocus

#1128101 13-Sep-2014 22:33

dcole13: K it works now. Must have been some crappy scotchlok or cable. Also, could someone from orcon send me the orcon firmware for the nf4v?
Thanks

PM me...

FireEngine

1223 posts

Uber Geek

Trusted

#1128166 14-Sep-2014 06:49

dcole13: K it works now. Must have been some crappy scotchlok or cable. Also, could someone from orcon send me the orcon firmware for the nf4v?
Thanks

Do a factory reset, if later firmware is available it will auto update.

If your cabling issue wasnt isolated and fixed, likely it will return.

Regards FireEngine