Samsung Galaxy S3 firmware updates

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › Samsung Galaxy S3 firmware updates

1 | ... | 11 | 12 | 13 | 14 | 15 | 16 | 17

434 posts

Ultimate Geek
Inactive user

#734061 18-Dec-2012 07:42

jayteebee:
menabassily:
jayteebee:
menabassily:
jayteebee:
menabassily:
johnr: Not always but when issues happen it helps,

I have done the backup and reset. Still stops at 25% and says update failed :(

Time to flash 4.1.2

I wish I could, I need the snapper Touch2Pay thing to work. God damn it 2degrees!!

Ok, I have reset and tried 4 times now. I have flashed the old 2degrees official rom and it has done the 20 MB update, will try again now and see. Otherwise I will take it to the shop and get them to deal with it.

Step1 grab your siii
Step2 grab a snapper card
Step3 put snapper car on back of phone
Step4 put a case over the phone and card

Presto latest os
Fully functioning on the 2degrees network
Able to snap on and off the bus with your phone

Problem.solved

Is that with Android 4.1.2 ?? which Rom are you talking about?

Polish international rom which is the premium suite, look it up.if your curious. The polish rom was intended for westurn.europe and england

It doesn't include the SIM Alliance API, but, as a developer I found a way to INJECT that API into my android 4.1.2, and I can do this for any ROM as long as you have root access. It's working now :)

Muahahahahahahahahhaa

jayteebee

17 posts

Geek

#734062 18-Dec-2012 07:49

menabassily: Cool, so the polish one has the Sim alliance API needed for 2degrees Touch2Pay? Say yes and I'll flash it right now :D

Well done, injoy split screen and the voice equalizer app, the smart screens too there wicked

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#734063 18-Dec-2012 07:53

jayteebee:
menabassily: Cool, so the polish one has the Sim alliance API needed for 2degrees Touch2Pay? Say yes and I'll flash it right now :D

Well done, injoy split screen and the voice equalizer app, the smart screens too there wicked

THey are two totally different things.

You can install the Snapper app on a large number of phones that have NFC and will be able to read a card balance with this.

To be able to use your phone as a Snapper card you need the API installed, which is not part of the Polish release.

menabassily

434 posts

Ultimate Geek
Inactive user

#734068 18-Dec-2012 08:00

sbiddle:
jayteebee:
menabassily: Cool, so the polish one has the Sim alliance API needed for 2degrees Touch2Pay? Say yes and I'll flash it right now :D

Well done, injoy split screen and the voice equalizer app, the smart screens too there wicked

THey are two totally different things.

You can install the Snapper app on a large number of phones that have NFC and will be able to read a card balance with this.

To be able to use your phone as a Snapper card you need the API installed, which is not part of the Polish release.

That's 100% true, however, I have fixed both issues, installed the app and the API :D

menabassily

434 posts

Ultimate Geek
Inactive user

#734069 18-Dec-2012 08:00

jayteebee:
menabassily: Cool, so the polish one has the Sim alliance API needed for 2degrees Touch2Pay? Say yes and I'll flash it right now :D

Well done, injoy split screen and the voice equalizer app, the smart screens too there wicked

I am still learning how to use them. quite nice

lokhor

2858 posts

Uber Geek

Trusted

#734084 18-Dec-2012 08:24

menabassily:
sbiddle:
jayteebee:
menabassily: Cool, so the polish one has the Sim alliance API needed for 2degrees Touch2Pay? Say yes and I'll flash it right now :D

Well done, injoy split screen and the voice equalizer app, the smart screens too there wicked

THey are two totally different things.

You can install the Snapper app on a large number of phones that have NFC and will be able to read a card balance with this.

To be able to use your phone as a Snapper card you need the API installed, which is not part of the Polish release.

That's 100% true, however, I have fixed both issues, installed the app and the API :D

Any Chance you could sharehow you did it?

All comments are my own opinion, and not that of my employer unless explicitly stated.

DoggNZ

437 posts

Ultimate Geek
Inactive user

#734087 18-Dec-2012 08:34

menabassily:It doesn't include the SIM Alliance API, but, as a developer I found a way to INJECT that API into my android 4.1.2, and I can do this for any ROM as long as you have root access. It's working now :)

Muahahahahahahahahhaa

Explain more!

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

menabassily

434 posts

Ultimate Geek
Inactive user

#734136 18-Dec-2012 09:48

I have the file "APK", you need to copy it to the System\app folder and change its permission then restart. Using Root explorer.

It's called"org.simalliance.openmobileapi.service-99b2b5405248e780c1e99648b792d8f4.apk" which is also called "SmartCardService"

menabassily

434 posts

Ultimate Geek
Inactive user

#734140 18-Dec-2012 09:52

It worked perfectly for sometime, now for some reason it has stopped working again :@ Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr

DoggNZ

437 posts

Ultimate Geek
Inactive user

#734181 18-Dec-2012 10:51

menabassily: It worked perfectly for sometime, now for some reason it has stopped working again :@ Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr

Permissions? Are you able to host it somewhere?

Neiljd55

21 posts

Geek

#734226 18-Dec-2012 11:49

4.1.1 finally here..Great. Now on to the next one 4.1.2 What I want is Multi View.
The 4.1.1 firmware CSC NZCDLK3 is on sammobile. Under the details, lists the regions Austria Belgium France etc for this CSC. The Polish 4.1.2 lists the same regions as our 4.1.1 does. Does the mean I can flash the 4.1.2 with no worries and problems and it will work fine on 2D. Thanks for any and all replies

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#734229 18-Dec-2012 11:52

Neiljd55: 4.1.1 finally here..Great. Now on to the next one 4.1.2 What I want is Multi View.
The 4.1.1 firmware CSC NZCDLK3 is on sammobile. Under the details, lists the regions Austria Belgium France etc for this CSC. The Polish 4.1.2 lists the same regions as our 4.1.1 does. Does the mean I can flash the 4.1.2 with no worries and problems and it will work fine on 2D. Thanks for any and all replies

Should work, but if you're going to do these sorts of things you need to to be wary of turning your phone into an expensive brick. There was a thread on here a few days ago from somebody who has unfortunately bricked their phone with the Polish firmware.

jayteebee

17 posts

Geek

#734262 18-Dec-2012 12:29

2degrees and vodafone update are the same thats why they were pushed out at the same time

Ap: i9300xxdlk1
Cp: i9300xxdlif
Csc: i9300vnzdll1

Neiljd55

21 posts

Geek

#734302 18-Dec-2012 13:18

jayteebee: 2degrees and vodafone update are the same thats why they were pushed out at the same time

Ap: i9300xxdlk1
Cp: i9300xxdlif
Csc: i9300vnzdll1

Is yours vodafone?

My 2D says

AP I9300XXDLK1
CP I9300XXDLID
CSC I9300NZCDLK3

jayteebee

17 posts

Geek

#734378 18-Dec-2012 15:18

Mine is a dse sourced 2degrees model, is yours purchaced through 2degrees or do you just use there network

1 | ... | 11 | 12 | 13 | 14 | 15 | 16 | 17