Digistar 811U has died (I think)

Forums › Freeview (DVB-T/DVB-S) › Digistar 811U has died (I think)

peejayw

1841 posts

Uber Geek

#77513 17-Feb-2011 11:34

It has started complaining of no or bad signal. Used a satellite finder and dish is correctly positioned.
Could someone just confirm what the Antenna settings should be?

I have

Satellite = Optus D1
LNB Type = User (its a dual LNB)
LNB Low = 5150
LNB High = 5750
TP = (2) 12483
DiSEqC = Disable
0/12 v = 0v
22KHz = Off
LNB Power = On

Q = 0% and L = 63%

Is it time to bin it?

Thanks.

I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.

Oblivian

7296 posts

Uber Geek

ID Verified

#440631 17-Feb-2011 11:45

C band LNB?

As I would have expected the LNB to be 10750 or 11300 if it is a sky one and not aftermarket

peejayw

1841 posts

Uber Geek

#440635 17-Feb-2011 11:56

Its an ex-Sky one, thanks.

I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.

Jaxson

8041 posts

Uber Geek

Trusted

#440638 17-Feb-2011 12:01

Looks like it's reset itself or similar.

Is you ex sky lnb a oval shaped one or a round shape? (ie the face of the lnb as it looks at the dish).

Anyway, yeah you'll have to select a different lnb from the list. Look for one with a frequency of 10750 or 11300. You might have to enter these details yourself.

Set these values for both and test, ie:

LNB Low = 10750
LNB High = 10750

No one has told me why you'd opt for these Digistar units over say the new Ultraplus 700hdmi PVR.

peejayw

1841 posts

Uber Geek

#440645 17-Feb-2011 12:14

Its oval. So Hi and Low the same value? Digistar was cheap at the time, where are the Utraplus available?
Thanks.

I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.

peejayw

1841 posts

Uber Geek

#440665 17-Feb-2011 12:41

10750/10750 didnt work so set to 10750/11300 and now I am getting q=42% and l = 87%

I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.

peejayw

1841 posts

Uber Geek

#440674 17-Feb-2011 12:52

But still not good enough for a signal, could my LNB be bad?

I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.

Jaxson

8041 posts

Uber Geek

Trusted

#440681 17-Feb-2011 12:58

I'd start with re aligning the dish given you said you did that earlier to try and fix it.

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

peejayw

1841 posts

Uber Geek

#440693 17-Feb-2011 13:16

Yeh, i checked the alighnment and its definately right but stll only get Q=42% (quality?) and L = 89% (Loss?)
So I guess its a tossup, new LNB or new STB :-(

I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.

Jaxson

8041 posts

Uber Geek

Trusted

#440715 17-Feb-2011 14:02

The oval SKY lnbs have been starting to fail lately.

Got anyone else nearby with a sat box you can test the current lnb setup with?

peejayw

1841 posts

Uber Geek

#440718 17-Feb-2011 14:05

Will ask around. If its the LNB any suggestions on what to go for or just pick something off Trademe?

I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.

Jaxson

8041 posts

Uber Geek

Trusted

#440721 17-Feb-2011 14:12

http://www.freeviewshop.co.nz/satellite-dish-lnbs-c-6.html

Better chance of support in my opinion.

Up to you but honestly for me I don't mind paying a bit more for a quality product I can trust.
I don't like having to go back to an install again.

They sell the Ultraplus unit I mentioned above too. I haven't tried it, but it seems to now be in a similar price bracket as the Digistar units. Well unless you got the digistar for $50, but anyway it has hdmi and PVR functions. I'm going to get one soon and will report back on my findings of it.