Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




60 posts

Master Geek


Topic # 23480 30-Jun-2008 17:48

Hi guys,

I'm trying to hook my HTPC up to my plasma. I've got an XFX 8500GT with SPDIF pass through via DVI.

I have a DVI->HDMI cable but it is DVI-D, should this be able to carry audio, because as of now, all I have is silence.

Do I actually need DVI-I?

Tom.

View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
2584 posts

Uber Geek
+1 received by user: 5

Mod Emeritus
Trusted
Subscriber

  Reply # 141606 30-Jun-2008 17:58
Send private message

First question is. how are you connecting the audio to the Video card? This is the most likely place for you to have problems.

DVI-D should be fine.







Media centre PC - Case Silverstone LC16M with 2 X 80mm AcoustiFan DustPROOF, MOBO Gigabyte MA785GT-UD3H, CPU AMD X2 240 under volted, RAM 4 Gig DDR3 1033, HDD 120Gig System/512Gig data, Tuners 2 X Hauppauge HVR-3000, 1 X HVR-2200, Video Palit GT 220, Sound Realtek 886A HD (onboard), Optical LiteOn DH-401S Blue-ray using TotalMedia Theatre Power Corsair VX Series, 450W ATX PSU OS Windows 7 x64



60 posts

Master Geek


  Reply # 141609 30-Jun-2008 18:11

Using the SPDIF out on my motherboard (connected to GND and SPDIF).

Does anyone know which side is ground on the XFX card? Is it the one with the little arrow?

 
 
 
 


3031 posts

Uber Geek
+1 received by user: 417

Subscriber

  Reply # 141619 30-Jun-2008 18:41
Send private message

From what I can tell the only difference between -I and -D is that the -I has analogue pins, and I don't think they would be used by hdmi.
When I connected my graphics card to the spdif header on the motherboard I had settings in the bios and in the onboard audio controller software I had to set.  Different brand from yours tho'.




Areas of Geek interest: Home Theatre, HTPC, Android Tablets & Phones, iProducts.

722 posts

Ultimate Geek


  Reply # 141622 30-Jun-2008 18:47
Send private message

Have things changed: I was under the impression that only HDMI could carry video+audio signals & DVI=video only.

Does you're motherboard not have either coax or optical SPDIF out? And if so, does you're Plasma have a coax input?




Silverstone LC14 HTPC Case/Intel E4600 CPU/GA-EP35-DS3 MOBO/Asus EN9500GT graphics/2GB RAM/total 2TB HDD space/HVR-2200 & 2X 150MCE tuner cards/LG GGC-H20L BD Drive/MCE2005/Mediaportal/TVServer 1.1.0Final/LG 55"3D LED-TV/Denon AVR-1803 receiver/X1 projector

3031 posts

Uber Geek
+1 received by user: 417

Subscriber

  Reply # 141623 30-Jun-2008 19:04
Send private message

1gkar: Have things changed: I was under the impression that only HDMI could carry video+audio signals & DVI=video only.

Does you're motherboard not have either coax or optical SPDIF out? And if so, does you're Plasma have a coax input?


Yep they can do.  The ATI card I tried intially had dual DVI ports and an adapter DVI-HDMI that plugged into it.  And it did indeed carry audio as well as video.  The card didn't work out (ATI probs covered ad nauseum on GZ threads) so changed to 8500GT with hdmi out but I still had to connect the spdif on the mobo to the card.

Are the gnd spdif pins not named on the card?




Areas of Geek interest: Home Theatre, HTPC, Android Tablets & Phones, iProducts.

2584 posts

Uber Geek
+1 received by user: 5

Mod Emeritus
Trusted
Subscriber

  Reply # 141657 30-Jun-2008 20:06
Send private message

rixth: Using the SPDIF out on my motherboard (connected to GND and SPDIF).

Does anyone know which side is ground on the XFX card? Is it the one with the little arrow?


Trying to remember now.. I cant get at the media centre right now to check without risking life and limb but I think the ground is the other pin so the one with the arrow is the spdif pin.

Other thing is at least in Vista I had to set digital out as the default (and then reboot) before I got sound out of it.







Media centre PC - Case Silverstone LC16M with 2 X 80mm AcoustiFan DustPROOF, MOBO Gigabyte MA785GT-UD3H, CPU AMD X2 240 under volted, RAM 4 Gig DDR3 1033, HDD 120Gig System/512Gig data, Tuners 2 X Hauppauge HVR-3000, 1 X HVR-2200, Video Palit GT 220, Sound Realtek 886A HD (onboard), Optical LiteOn DH-401S Blue-ray using TotalMedia Theatre Power Corsair VX Series, 450W ATX PSU OS Windows 7 x64

722 posts

Ultimate Geek


  Reply # 141665 30-Jun-2008 20:25
Send private message

I'm pretty sure Nety is right & the arrow indicates the live pin; at least on the motherboard front panel headers of my Gigabyte mobo.




Silverstone LC14 HTPC Case/Intel E4600 CPU/GA-EP35-DS3 MOBO/Asus EN9500GT graphics/2GB RAM/total 2TB HDD space/HVR-2200 & 2X 150MCE tuner cards/LG GGC-H20L BD Drive/MCE2005/Mediaportal/TVServer 1.1.0Final/LG 55"3D LED-TV/Denon AVR-1803 receiver/X1 projector



60 posts

Master Geek


  Reply # 141694 30-Jun-2008 21:37

Just did some diagnostics with a multimeter (very basic), I tested the SPDIF out, and the voltage was around .3-.5v.

My motherboard does not have coax out on the back, though it does has TOSLINK. I do not have any toslink (or coax for that matter) compatible equipment.

I'm thinking it's plausible I have a bad GFX card. Sound via the onboard HDMI works OK, but when I try to use the XFX 8500GT, it does not. I assume these both use the same digital audio chip.

Any thoughts?

722 posts

Ultimate Geek


  Reply # 141706 30-Jun-2008 21:55
Send private message

Try this:

Click on: start>settings>control panel>sounds & audio devices

Click on advanced button. On options menu, click properties. Check SPDIF in "show the following volume controls". Is SPDIF greyed out? Or is it muted or volume slider down to zero? Probably not as you have sound with system, but never know.

Or is there an option hidden somewhere in the video card control panel?




Silverstone LC14 HTPC Case/Intel E4600 CPU/GA-EP35-DS3 MOBO/Asus EN9500GT graphics/2GB RAM/total 2TB HDD space/HVR-2200 & 2X 150MCE tuner cards/LG GGC-H20L BD Drive/MCE2005/Mediaportal/TVServer 1.1.0Final/LG 55"3D LED-TV/Denon AVR-1803 receiver/X1 projector



60 posts

Master Geek


  Reply # 141713 30-Jun-2008 22:06

I'm using Vista, so I couldn't find those specific areas.

One thing I noted though, that under the digital out->levels there is just a mute button, no slider. I'm guessing this is to be expected though?

2584 posts

Uber Geek
+1 received by user: 5

Mod Emeritus
Trusted
Subscriber

  Reply # 141811 1-Jul-2008 10:46
Send private message

rixth: Just did some diagnostics with a multimeter (very basic), I tested the SPDIF out, and the voltage was around .3-.5v.

I'm thinking it's plausible I have a bad GFX card. Sound via the onboard HDMI works OK, but when I try to use the XFX 8500GT, it does not. I assume these both use the same digital audio chip.

Any thoughts?


Maybe the soundcard needs to be set to output via the header rather then the hdmi? I have found that if you right click in the output devices window and tell it to show disabled devices it can help as it may be that the output that you need is disabled so not showing up.

The XFX does have a chip on board for the passthough to work which could be faulty but I think it is much more likely a config problem.







Media centre PC - Case Silverstone LC16M with 2 X 80mm AcoustiFan DustPROOF, MOBO Gigabyte MA785GT-UD3H, CPU AMD X2 240 under volted, RAM 4 Gig DDR3 1033, HDD 120Gig System/512Gig data, Tuners 2 X Hauppauge HVR-3000, 1 X HVR-2200, Video Palit GT 220, Sound Realtek 886A HD (onboard), Optical LiteOn DH-401S Blue-ray using TotalMedia Theatre Power Corsair VX Series, 450W ATX PSU OS Windows 7 x64



60 posts

Master Geek


  Reply # 141816 1-Jul-2008 10:59

I had high hopes for that, as it is something I had not tried, however, I do not see any other playback devices when I tick show disabled devices.

I have:
  Speakers
    Realtek High Definition Audio
  Realtek Digital Output (this one is the default, and I see the little green volume meter moving)
    Realtek High Definition Audio


2584 posts

Uber Geek
+1 received by user: 5

Mod Emeritus
Trusted
Subscriber

  Reply # 141824 1-Jul-2008 11:25
Send private message

Nothing in the bios or does the sound card have its own control pannel?

Also I take it that if you send the test sounds to it that you do not get them either?







Media centre PC - Case Silverstone LC16M with 2 X 80mm AcoustiFan DustPROOF, MOBO Gigabyte MA785GT-UD3H, CPU AMD X2 240 under volted, RAM 4 Gig DDR3 1033, HDD 120Gig System/512Gig data, Tuners 2 X Hauppauge HVR-3000, 1 X HVR-2200, Video Palit GT 220, Sound Realtek 886A HD (onboard), Optical LiteOn DH-401S Blue-ray using TotalMedia Theatre Power Corsair VX Series, 450W ATX PSU OS Windows 7 x64

3031 posts

Uber Geek
+1 received by user: 417

Subscriber

  Reply # 141830 1-Jul-2008 11:56
Send private message

rixth: I had high hopes for that, as it is something I had not tried, however, I do not see any other playback devices when I tick show disabled devices.

I have:
  Speakers
    Realtek High Definition Audio
  Realtek Digital Output (this one is the default, and I see the little green volume meter moving)
    Realtek High Definition Audio



Selecting Realtek High Definition Audio is how I got my sound out through my graphics card (not an XFX one tho').  I also had to configure it in bios.




Areas of Geek interest: Home Theatre, HTPC, Android Tablets & Phones, iProducts.

2584 posts

Uber Geek
+1 received by user: 5

Mod Emeritus
Trusted
Subscriber

  Reply # 141845 1-Jul-2008 12:25
Send private message

Hate to state the obvious but you have tried changing it back or to something else in the bios...?







Media centre PC - Case Silverstone LC16M with 2 X 80mm AcoustiFan DustPROOF, MOBO Gigabyte MA785GT-UD3H, CPU AMD X2 240 under volted, RAM 4 Gig DDR3 1033, HDD 120Gig System/512Gig data, Tuners 2 X Hauppauge HVR-3000, 1 X HVR-2200, Video Palit GT 220, Sound Realtek 886A HD (onboard), Optical LiteOn DH-401S Blue-ray using TotalMedia Theatre Power Corsair VX Series, 450W ATX PSU OS Windows 7 x64

 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Talking net neutrality on RNZ Nine-to-Noon
Posted 24-Nov-2017 12:11


Air New Zealand experiments with blockchain technology
Posted 23-Nov-2017 15:39


Symantec selects Amazon Web Services to deliver cloud security
Posted 23-Nov-2017 10:40


New Zealand Ministry of Education chooses Unisys for cloud-based education resourcing management system
Posted 22-Nov-2017 22:00


Business analytics software powers profits for NZ wine producers
Posted 22-Nov-2017 21:52


Pyrios strikes up alliance with Microsoft integrator UC Logiq
Posted 22-Nov-2017 21:51


The New Zealand IT services ecosystem - it's all digital down here
Posted 22-Nov-2017 21:49


Volvo to supply tens of thousands of autonomous drive compatible cars to Uber
Posted 22-Nov-2017 21:46


From small to medium and beyond: Navigating the ERP battlefield
Posted 21-Nov-2017 21:12


Business owners: ERP software selection starts (and finishes) with you
Posted 21-Nov-2017 21:11


Why I'm not an early adopter
Posted 21-Nov-2017 10:39


Netatmo launches smart home products in New Zealand
Posted 20-Nov-2017 20:06


Huawei Mate 10: Punchy, long battery life, artificial intelligence
Posted 20-Nov-2017 16:30


Propel launch Disney Star Wars Laser Battle Drones
Posted 19-Nov-2017 21:26


UFB killer app: Speed
Posted 17-Nov-2017 17:01



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.